Curt Wiring - Trailer Connectors - C59496 Review Video

From a convenience standpoint, the #306-X7186 EcoHitch would probably be easier to live with, as you wouldn't need to remove the receiver when it's not being used but because there'd be a 10 inch height difference between the…

We do have installation instructions for the EcoHitch Invisi Trailer Hitch Receiver #306-X7186 and I have sent them to you in a separate email. As you mentioned in your question, there are 3 trailer hitches available for your 2012 Chevy Volt and…

Yes! The Vortex Strips in your Vortex Aero Bars #RRVA137B-2 help cut down on wind noise when driving. What I've noticed is that without the strips, it's like the bars catch some of the air and send it whistling through the C channels. What…

I reached out to my contact at Curt to make sure I give you the most accurate measurement. The wall thickness on the Curt Solid Steel 1-1/4" Hitch Bar with Raw Finish - 24" Long, #C49524, is 0.221 inches.

When using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation #ETBC7 to install the Curt Echo Mobile part #C51180 you can just tape up the blue wire of the adapter as it would not be used.

To get both of the 2021 Subaru Outbacks pulling the Safari Condo F1743, you would need to purchase two of the #ETBC7 kits. They would piggy back off of the existing 4 pin connections already on the vehicles, so you are already partially there. I did…

The best trailer wiring harness option we offer for a 2023 Hyundai Palisade is theCurt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C43FV. This offers a completely plug and play installation with no splicing into the vehicle…

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

Yes, the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat #C59496 does fit the 2022 Chevy Bolt EUV.

The correct trailer hitch for a 2013 Mercedes-Benz ML350 is part #C13411 which offers bolt-on installation as well as a hidden design so you can retain the factory like appearance of your Mercedes.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For a 2011 Volvo C30 we have trailer wiring kits like the part #C59496 which will work well with the Curt hitch part #C11337 for towing. If you wanted to do some towing you might be interested in etrailer ball mount kit #989900. It comes with 2 ball…