Locating Reverse Wire On 2015 Toyota Highlander When Installing Trailer Wiring Harness
Question:
I have a 7 prong connector installed on my 2015 Toyota Hylander Limited. I purchased the 7 prong from Etrailer Item number 37185 but the reverse lights were not connected!! I would like to do it myself, but how do i connect the center wire for backup lights to the vehicle. your assistance is greatly appreciated!!
asked by: Jay
Expert Reply:
The easiest way to find the reverse wire circuit is to use a circuit tester like part # PTW2993.
If your back up light is a separate light at the rear of your Highlander, use the circuit tester to check the wire when the truck is in reverse. Have someone sit in the driver seat, set the emergency brake and put their foot on the brake pedal and then shift into reverse while you check the wires at the back of the light assembly for the backup light. When you find the wire that only shows current when the truck is placed in reverse, you can splice into that wire.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Q&A: How to Tap into Reverse Light Circuit for Lockout on Surge Brake Trailer for 2016 Toyota Highlander
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Video: Hopkins Adapter 4-Pole to 7-Pole and 4-Pole Installation - 2017 Toyota Highlander
- Q&A: Wiring for Toyota 2010 Highlander with a 7-Way connector for Towing
- Q&A: How to Find the Reverse Light on a 2010 Toyota Highlander to Wire in a 5-Way
- Video: Trailer Wiring Harness Installation - 2018 Toyota Highlander 118449
- Video: Best 2018 Toyota Highlander Trailer Wiring Options
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2018 Toyota Highlander
- Video: etrailer Trailer Brake Controller Universal Kit Installation - 2019 Toyota Highlander
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Shop: K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
- Shop: Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
- Video: Review of etrailer - Brake Controller - ETBC7
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Q&A: Can Brake Controller Install in 2018 Toyota Highlander
- Q&A: How to Determine if a 2017 Toyota Highlander has a Factory Tow Package
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Tow Bar Wiring
- Q&A: How To Test A Prodigy P3 Controller Without Having Direct Access To The Trailer
- Q&A: Finding the Brake Switch Wire to Install a Brake Controller on a 2014 Toyota Highlander
- Search Results: splices into reverse light
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Search Results: tools
- Search Results: 7 way trailer connector
- Search Results: chemicals