How To Test A Prodigy P3 Controller Without Having Direct Access To The Trailer
Question:
Hey I currently got a prodigy p3 to work with my 2013 Volkswagen Touareg TDI with tow package. I have same exact set up in video shown in the how to , very simple set up especially with the video. My question is how can I test the brake controller if possible? without connecting a trailer? I dont have direct access to a trailer with brakes but will be renting an RV with brakes and the P3 turns on when plugged in and I get the menus but obviously shows no trailer. If I put a multimeter on the 7 pin can I check if I hit the brakes or it only works once a full 7 pin trailer is connected? thank you so much
asked by: Anthony S
Expert Reply:
Since your prodigy P3 is a proportional controller you can partially test for function at the trailer connector using the hook probe circuit tester # PTW2993. You can use this tester to test the pin the 5:00 position on your trailer connector while someone else applies the manual trailer braking switch on the P3. You should see signal on the tested when the switch is actuated.
You can also test the red wire exiting the rear of the controller as the brake pedal is being pressed and again you should see a current on the tester when the brake pedal is pressed.
If you have a friend or neighbor that has a trailer with electric brakes you could make 100% sure by hitching up to their trailer.
I attached a review video link below.
Products Referenced in This Question
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Wiring
- Search Results: re34fr
- Q&A: How to Locate the Reverse Light Wire on the Back of a 2017 Toyota Highlander
- Q&A: How to Tap into Reverse Light Circuit for Lockout on Surge Brake Trailer for 2016 Toyota Highlander
- Q&A: How to Find the Reverse Light on a 2010 Toyota Highlander to Wire in a 5-Way
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2018 Toyota Highlander
- Q&A: Wiring for Toyota 2010 Highlander with a 7-Way connector for Towing
- Video: Trailer Wiring Harness Installation - 2018 Toyota Highlander 118449
- Video: Best 2018 Toyota Highlander Trailer Wiring Options
- Shop: Towing Mirrors
- Search Results: tester 7 pin
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Shop: K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Video: Hopkins Adapter 4-Pole to 7-Pole and 4-Pole Installation - 2017 Toyota Highlander
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2019 Toyota Highlander
- Video: etrailer Trailer Brake Controller Universal Kit Installation - 2019 Toyota Highlander
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Q&A: How to Determine if a 2017 Toyota Highlander has a Factory Tow Package
- Q&A: Can Brake Controller Install in 2018 Toyota Highlander
- Q&A: How to Determine if a 2018 Toyota Highlander has a Factory Tow Package
- Search Results: 7 pin trailer connector tester
- Search Results: quick splice wire connectors
- Shop: Self-Stripping Connector with Waterproof Sealant - 14-18 Gauge - White and Blue - Qty 1
- Article: Testing Brake Controls
- Search Results: brake controller