Will the Reese M5 Series Hitch Work on a 2017 Ford F-350 Super Duty with Factory Prep Package

Question

Question:

Will the RP30921 normally used for the Ford SRW factory prep kit also fit the Ford F350 dually factory prep kit? Thank you.

asked by: Alan L

0

Expert Reply:

Yes, the Reese M5 Series 5th Wheel Trailer Hitch, # RP30921, is a confirmed fit for your 2017 Ford F-350 Super Duty with the factory prep package.

This hitch has an 20,000lbs gross towing weight and the hitch height is adjustable between 14 to 18 inches.

expert reply by: Jared P

0

Answer 1

There are two ways to install the Demco Recon 5th Wheel Trailer Hitch part #DM8550043 on your 2019 Ford F-250 which will depend on whether or not you have the puck system (see photo). If you don't have the puck system then you can use the…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring.

view full answer...