Will the Americana Baby Moon Trailer Wheel Center Cap Fit on a Toyota bB Steel Wheel

Question

Question:

Im interested in your 1/2 moon retro wheel cap. Can it fix my Toyota bB steel wheel ? I have a set of 14inch and 15inch steel wheel. Please advice, thank you.

asked by: Alan L

1

Helpful Expert Reply:

The Americana Baby Moon Trailer Wheel Center Cap # AM90086 that you referenced will fit 13 inch, 14 inch, and 15 inch 5-lug conventional trailer wheels. It has an outside diameter of 9-5/8 inches and an inside diameter of 9-1/4 inches. As long as your Toyota bB steel wheel fits in those parameters, then the Center Cap will fit.

I have attached a picture of part # AM20504 which demonstrates the 3 nubs that your wheel will need to hold the cap in place.

expert reply by: Jon G

1

click to enlarge

Answer 1

For your Dexstar conventional steel wheel #AM20766 you cannot use the Americana Baby Moon Trailer Wheel Center Cap #AM90086 or the pointed top baby moon #AM981306 because they only fit up to 15 inch wheels. Other options are to use the center cap…

view full answer...

Answer 2

In order to obtain the correct wheel replacement you will need to know your bolt pattern and tire size you prefer. Your pilot hole measurement of 3-9/16 inches you referenced is a good start and I included a link to all the wheels we currently…

view full answer...

Answer 3

If you have a conventional style 15 inch wheel we have the part #AM90086. It has an internal diameter of 9-1/4 inches. I attached a picture of what the wheel this cap is designed to fit looks like.

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 10

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a…

view full answer...

Answer 11

There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…

view full answer...

Answer 12

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...