Availability of Baby Moon Hub Cap to Fit 15 inch Trailer Wheel

Question

Question:

Do you offer a baby moon hub cap that will ft 15 Dexter wheel ? 1967

asked by: Charles T

0

Expert Reply:

If you have a conventional style 15 inch wheel we have the part # AM90086. It has an internal diameter of 9-1/4 inches. I attached a picture of what the wheel this cap is designed to fit looks like.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have one baby moon wheel cover for a 15 inch wheel with 6 lugs. For that we have the part #AM981306. It measures 10-9/16 inches overall and has an inside diameter of 10-1/4 inches. I attached a review video for this cap for you to check out as…

view full answer...

Answer 2

Yes, the Baby Moon Covers #AM981306 that you referenced are a fit for the Dexstar Conventional Steel Wheel #AM20514.

view full answer...

Answer 3

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Answer 4

The only type of hub/wheel cap we have that will fit a 14" wheel is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086. This wheel cap simply snaps onto a conventional 5 lug wheel and provides a stylish chrome plated steel cap that…

view full answer...

Answer 5

First you'll want to determine the bolt pattern of your wheels to ensure that you're getting the correct replacement. For 14" wheels we have one option, the Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on…

view full answer...

Answer 6

The measurement that you will want to take is the outer diameter of the inner ring and the outer diameter of the inner ring with one of the tabs (see photo). You will also want to count the bolt holes on the wheel and know the wheel diameter. The…

view full answer...

Answer 7

The Americana Baby Moon Trailer Wheel Center Cap #AM90086 that you referenced will fit 13 inch, 14 inch, and 15 inch 5-lug conventional trailer wheels. It has an outside diameter of 9-5/8 inches and an inside diameter of 9-1/4 inches. As long as your…

view full answer...

Answer 8

Since your conventional style trailer wheels are 15 inch in diameter the correct baby moon cover would be the part #AM90086 that you referenced.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Availability of Baby Moon Hub Cap to Fit 15 inch Trailer Wheel

Product Page this Question was Asked From

Continue Researching