Recommended Bearing Kit For 7K Lippert Axles On Grand Design Reflection 367bhs

Question

Question:

My husband and I purchased a Grand Design Reflection 367bhs. The axles are by Lippert. They are rated for 7,000 lbs. We have 2 xle set put on the 5er. What bearing kit do you have that will fit our axles?

asked by: Karen M

0

Expert Reply:

For your Lippert 7k axle you would want the part # BK3-200 if the seal inner diameter needed is 2.25 inches or part # BK3-210 for inner diameter of 2.125 inches. You can use a digital caliper like # PTW80157 to confirm size, or check the part number listed on the seal itself if it is legible. I've attached an article to help with this.

expert reply by: Jason S

0

Answer 1

For your 7K axles, you will want the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal #BK3-200 for each hub if you have the standard spindle. If you have the EZ Lube spindle with the grease zerk then you will want #BK3-210 to include the EZ Lube…

view full answer...

Answer 2

Took some doing but I was able to track down the correct bearing kit for your Sundowner horse trailer with 7,000 lb axles, and what you will need is the following: - Bearing Kit, 14125A/ 25580 Bearings #BK3-200

view full answer...

Answer 3

Since you have a Lippert 7k axle the correct bearing kit is either part #BK3-200 or the part #BK3-210. The difference would be the size of the inner diameter of the grease seal. The part #BK3-200 comes with seal that has inner diameter of 2.25…

view full answer...

Answer 4

The correct bearing kit for your 7,000 pound Lippert axle is #BK3-210.

view full answer...

Answer 5

According to Lippert, the correct bearing kit is the #BK3-200. This includes the #14125A outer and #25580 inner bearing, along with the 10-36 grease seal.

view full answer...

Answer 6

We have two bearing kits that have the same bearing numbers you need. There is part #BK3-200 that uses the seal part 10-36 which has an inner diameter of 2.25 inches and then we have the part #BK3-210 that uses a seal with an inner diameter of…

view full answer...

Answer 7

Thank you for providing the reference numbers from your Jayco trailer's Dexter axle. I was not able to cross reference either of these numbers, 123617439 and 1657213, but we can still help you. It appears that one of the other bits of info…

view full answer...

Answer 8

Since you have a Lippert 7k axle the correct bearing kit is the part #BK3-210 that you referenced.

view full answer...

Answer 9

Appreciate that info, and we do have the exact bearing kit you need for your Curt/Lippert 7,000 lb trailer axle. The correct kit is the following part number: - Bearing Kit #BK3-200

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...