TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-200 Review Video

For 7k Dexter axle bearings you have two options depending on the inner diameter of the seal you need. You would need part #BK3-200 for if your seal has an inner diameter of 2.25 inches. Or part #BK3-210 for if your seal inner diameter is 2.125…

Your 2020 Forest River Cedar Creek 5th Wheel will use the 010-036-00 Grease Seals #RG06-070. Your Dexter axle has a 2.25" inside diameter grease seal. The 010-010-00 Oil Seal #RG06-090 only has an inner diameter of 2.125" We do offer the…

We do not carry a tool that will help install your races, though I can pass on some information for you that might be helpful. To install your races, this is what you'll want to do, according to our help article on replacing bearings, races and…

If they are double-eye leaf springs, it should not matter which way they are facing. But if they are slipper springs, the eye end is at the front and the slipper is at the back. The springs that we carry are not marked as to which end is front and I…

When installing a seal at the back of a hub the outer part of the seal will need to be flush with the hub. I have linked a video that should help. You could watch the whole video or fast forward to the 1 minute, 50 second mark to see the seal…

Yes, Lippert and Dexter 7k axles use exact same bearings. The only issue you might run into is a difference in grease seal size required. There are two sizes of grease seals that fit 7k axles and there isn't a rhyme or reason as to which you may…

There are two bearing kits for a Dexter 7000lb axle with the only difference being the grease seal. You will want to use a set of digital calipers like #PTW80157 to measure the spindle where the grease seal rides as shown in the included diagram. If…

The LaSalle Bristol Cable-Actuated RV Waste Valve, #34466N4AB120GM is not designed to be trimmed. However, there are multiple lengths available: - 36" Cable #34466N4AB36GM - 48" Cable #34466N4AB48GMA - 72" Cable #34466N4AB72GMA -…

It would be possible if you are willing to remove just the center section of the #34466N4AB96GMA and what you have now. The center portion would bolt right up to the flanges you have currently.

I would be happy to help you determine which bearings and wheels your 6' x 12' home made trailer uses, and its axle capacity. Starting with the bearings you will need to remove one of your current hubs and look for the bearing numbers stamped…

For 7k Dexter axle bearings you have two options depending on the inner diameter of the seal you need. You would need part #BK3-200 for if your seal has an inner diameter of 2.25 inches. Or part #BK3-210 for if your seal inner diameter is 2.125…

The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part #BK3-210 which has a 2.125" seal or the Bearing Kit part #BK3-200 which has a 2.250" seal. Unfortunately, this axle could have come…