Bearing Kit For Sundowner Gooseneck Trailer With 7,000 lb Axles

Question

Question:

Hi, Im looking to replace the wheel bearings in my 2021 Sundowner 32 gooseneck w/7K axles. Would you happen to have the part #s. Preferably Timken. Thanks!

asked by: Arax

0

Expert Reply:

Took some doing but I was able to track down the correct bearing kit for your Sundowner horse trailer with 7,000 lb axles, and what you will need is the following:

- Bearing Kit, 14125A/ 25580 Bearings # BK3-200

expert reply by: Kyle S

0

Answer 1

For your 7K axles, you will want the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal #BK3-200 for each hub if you have the standard spindle. If you have the EZ Lube spindle with the grease zerk then you will want #BK3-210 to include the EZ Lube…

view full answer...

Answer 2

The correct bearing kit for your 7,000 pound Lippert axle is #BK3-210.

view full answer...

Answer 3

Since you have a Lippert 7k axle the correct bearing kit is either part #BK3-200 or the part #BK3-210. The difference would be the size of the inner diameter of the grease seal. The part #BK3-200 comes with seal that has inner diameter of 2.25 inches…

view full answer...

Answer 4

According to Lippert, the correct bearing kit is the #BK3-200. This includes the #14125A outer and #25580 inner bearing, along with the 10-36 grease seal.

view full answer...

Answer 5

Since you have a Lippert 7k axle the correct bearing kit is the part #BK3-210 that you referenced.

view full answer...

Answer 6

Thank you for providing the reference numbers from your Jayco trailer's Dexter axle. I was not able to cross reference either of these numbers, 123617439 and 1657213, but we can still help you. It appears that one of the other bits of info you…

view full answer...

Answer 7

We have two bearing kits that have the same bearing numbers you need. There is part #BK3-200 that uses the seal part 10-36 which has an inner diameter of 2.25 inches and then we have the part #BK3-210 that uses a seal with an inner diameter of 2.125…

view full answer...

Answer 8

For your Lippert 7k axle you would want the part #BK3-200 if the seal inner diameter needed is 2.25 inches or part #BK3-210 for inner diameter of 2.125 inches. You can use a digital caliper like #PTW80157 to confirm size, or check the part number…

view full answer...

Answer 9

Yes the Solera replacement awning fabric part #LCV000334420 would fit your Dometic setup that you currently have that has the alumaguard.

view full answer...

Answer 10

We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle. However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then…

view full answer...

Answer 11

The #RG06-070 grease seal included with the #BKS-200 bearing kit is .375 or 3/8 of an inch thick. The corresponding race to the 14125A bearing is a 14276 which has an outside diameter of 2.717 inches. The 25520 race is used with the 25580 bearing,…

view full answer...

Answer 12

We have the bearings and seal you mentioned but we do not carry the Timken brand at this time. We do have a kit that has all of the bearings you mentioned together. For that you would want the part #BK3-200. The kit you referenced #BK3-210 uses the…

view full answer...

Bearing Kit For Sundowner Gooseneck Trailer With 7,000 lb Axles

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching