Replacement Bearing Kit and Brake Assemblies for 2017 Jayco Pinnacle 36FBTS with 7000 lb Axles

Question

Question:

What will I need to replace brakes and bearings on a 2017 Jayco Pinnacle 36FBTS with 7000 lb axle

asked by: Ron M

0

Expert Reply:

For your 7K axles, you will want the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200 for each hub if you have the standard spindle. If you have the EZ Lube spindle with the grease zerk then you will want # BK3-210 to include the EZ Lube washer.

Then for brake assemblies the kit part # AKEBRK-7-SA that you referenced would fit and work well.

expert reply by: Jameson C

0

Answer 1

Since you have a Lippert 7k axle the correct bearing kit is either part #BK3-200 or the part #BK3-210. The difference would be the size of the inner diameter of the grease seal. The part #BK3-200 comes with seal that has inner diameter of 2.25…

view full answer...

Answer 2

Took some doing but I was able to track down the correct bearing kit for your Sundowner horse trailer with 7,000 lb axles, and what you will need is the following: - Bearing Kit, 14125A/ 25580 Bearings #BK3-200

view full answer...

Answer 3

The correct bearing kit for your 7,000 pound Lippert axle is #BK3-210.

view full answer...

Answer 4

According to Lippert, the correct bearing kit is the #BK3-200. This includes the #14125A outer and #25580 inner bearing, along with the 10-36 grease seal.

view full answer...

Answer 5

Thank you for providing the reference numbers from your Jayco trailer's Dexter axle. I was not able to cross reference either of these numbers, 123617439 and 1657213, but we can still help you. It appears that one of the other bits of info you…

view full answer...

Answer 6

Since you have a Lippert 7k axle the correct bearing kit is the part #BK3-210 that you referenced.

view full answer...

Answer 7

For your Lippert 7k axle you would want the part #BK3-200 if the seal inner diameter needed is 2.25 inches or part #BK3-210 for inner diameter of 2.125 inches. You can use a digital caliper like #PTW80157 to confirm size, or check the part number…

view full answer...

Answer 8

We have two bearing kits that have the same bearing numbers you need. There is part #BK3-200 that uses the seal part 10-36 which has an inner diameter of 2.25 inches and then we have the part #BK3-210 that uses a seal with an inner diameter of 2.125…

view full answer...

Answer 9

Appreciate that info, and we do have the exact bearing kit you need for your Curt/Lippert 7,000 lb trailer axle. The correct kit is the following part number: - Bearing Kit #BK3-200

view full answer...

Answer 10

You are correct, the only difference between the #8-219-4UC3-EZ and #42866UC3-EZ is the ID of the grease seal. The #8-219-4UC3-EZ uses a grease seal that has a 2.125 inside diameter while the #42866UC3-EZ uses a seal with a 2.250 inside diameter.

view full answer...

Answer 11

The Dexter E-Z Lube Hub and Drum assembly that would work for your Lippert axles with the bearing and seal numbers you provided is part #42866UC3-EZ. This fits 5200 lb to 7000 lb axles that require a 2-1/4 inch ID grease seal. The drum dimensions for…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Bearing Kit and Brake Assemblies for 2017 Jayco Pinnacle 36FBTS with 7000 lb Axles

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching