Blue Ox Tow Bar to Roadmaster MX Adapter Pin Diameter

Question

Question:

can you tell me what size hole that your pin goes though to lock it to your car thanks Rick

asked by: Rick M

0

Expert Reply:

The pin diameter that the round ends of the # BX88185 is designed to attach to is 3/4 inches. The pins that normally are ran through these are the part # RM-910029.

expert reply by: Jameson C

0

Answer 1

Yes, the Roadmaster Tow Defender Protective Screening part #RM-4750 will work with a Blue Ox. In fact, the Roadmaster Tow Defender Protective Screening is actually designed for this exact purpose but I am not aware of a similar option from Blue Ox…

view full answer...

Answer 2

I have heard back from my contacts at Roadmaster about the pin you were needing. Part #RM-910008-00 which is the 5/8 inch diameter Linchpin and Chain is the correct replacement for your Falcon Tow Bar.

view full answer...

Answer 3

Yes, the new Universal Tow Bar Adapter for Roadmaster Direct-Connect Baseplate #RM62ZR from Roadmaster will allow your Roadmaster Direct-Connect Base Plate Kit #RM97RR to be compatible with your Blue Ox tow bar.

view full answer...

Answer 4

Yes you can use a Blue Ox tow bar with the Roadmaster base plate kits like the Direct Connect part #RM97RR that fits your 2023 Ford Maverick. It just comes down to picking the correct adapter which would be the #BX88185 and you'd be set.

view full answer...

Answer 5

The Roadmaster Linch Pins part #RM-910024 has a shaft diameter of .308" and length of 1.537" from the end of the pin to the bottom of the retaining nut

view full answer...

Answer 6

Both the old Falcon 5250 tow bar and the current Falcon 2 #RM-520 will work with the same crossbar assembly part #RM-067. So if you already have the Roadmaster crossbar you should not need any additional parts to bring it together with the Falcon…

view full answer...

Answer 7

You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears: -…

view full answer...

Answer 8

By the photo you kindly provided, you have a nearly complete Roadmaster Base Plate Quick Disconnect Assembly. It looks like you're missing at least one linchpin, part #RM-910024. According to my Roadmaster representative, the #RM-032 adapter is…

view full answer...

Answer 9

The vehicle protectors we offer install over the tow bar and help protect the vehicle by preventing the motorhome from kicking up rocks and debris. The only problem with these is that they can be rather bulky to store. I recommend the Roadmaster Tow…

view full answer...

Answer 10

Yes we do. Depending on which pins you are referring to you would either need the Roadmaster Linch Pins #RM-910024. Or you would need the Roadmaster Replacement Base Pins with Chains and Clips part #RM-910029.

view full answer...

Answer 11

You can use the Blue Ox Aladdin Tow Bar with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms part #RM-524454-5 for the 2015-2018 Ford Edge 3.5L V6 with the Roadmaster to Blue Ox adapter part #BX88185. This adapter is compatible wit the…

view full answer...

Answer 12

The top linch pins on the Replacement Quick Disconnect Crossbar Assembly #910021-00 you referenced can be found as a quantity of 2 on our site with part #RM-910024.

view full answer...