Can I Use Blue Ox Aladdin Tow Bar With Roadmaster EZ-5 Base Plate On Ford Edge

Question

Question:

Will the Roadmaster EZ5 Base Plate work with my current tow bar that is a blue ox? It is BX4325 Aladdin

asked by: Bill J

1

Helpful Expert Reply:

You can use the Blue Ox Aladdin Tow Bar with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms part # RM-524454-5 for the 2015-2018 Ford Edge 3.5L V6 with the Roadmaster to Blue Ox adapter part # BX88185. This adapter is compatible wit the Aladdin Tow bar and the EZ5 base plates. You will also need replacement base pins part # RM-910029 because the Blue Ox pins are too small.

expert reply by: Heather A

1

Answer 1

The Roadmaster Linch Pins part #RM-910024 has a shaft diameter of .308" and length of 1.537" from the end of the pin to the bottom of the retaining nut

view full answer...

Answer 2

I have heard back from my contacts at Roadmaster about the pin you were needing. Part #RM-910008-00 which is the 5/8 inch diameter Linchpin and Chain is the correct replacement for your Falcon Tow Bar.

view full answer...

Answer 3

We carry the replacement parts you are looking for. The base pin you are looking for is available as part #RM-910008-00. The #35700-00 is sold in pairs as part #RM-910024. Current pricing can be seen by clicking the provided links.

view full answer...

Answer 4

The pin you need is part #RM-910008-00. The diameter is .74 inches and the length is 4 inches from the flange to the tip, as measured with a digital caliper.

view full answer...

Answer 5

The pins used to connect a Roadmaster tow bar to the EZ-5 Roadmaster Direct-Connect Base Plate Kit #RM-521567-5 for your 2014 Honda CR-V have a 3/4" diameter and can be found on our site as part #RM-910029. I reached out to Ready Brake and they…

view full answer...

Answer 6

Sounds like you are looking for the part #RM-910029. This is the pin that will run through the arms of the tow bar that will attach it to the removable arms of the #RM-523182-5.

view full answer...

Answer 7

By the photo you kindly provided, you have a nearly complete Roadmaster Base Plate Quick Disconnect Assembly. It looks like you're missing at least one linchpin, part #RM-910024. According to my Roadmaster representative, the #RM-032 adapter is…

view full answer...

Answer 8

The Roadmaster Replacement Base Pins with Chains and Clips (Qty 2) #RM-910029 have a zinc plating, so they can be welded but specific precautions should be taken. The boiling point of zinc is below the melting point of steel and Zinc fumes are toxic…

view full answer...

Answer 9

You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears: -…

view full answer...

Answer 10

As indicated in the provided photo, the holes in the removable drawbars of the Roadmaster #RM-521424-5 base plate kit accept a 3/4 inch diameter pin, such as part #RM-910029 so the holes are actually fractionally larger than 3/4 of an inch. According…

view full answer...

Answer 11

The Roadmaster Linch Pins, #RM-910024, are the correct linch pins for your Stowmaster 5000 tow bar. If you are still interested in the dimensions of the pins, see the attached diagram.

view full answer...

Answer 12

The top linch pins on the Replacement Quick Disconnect Crossbar Assembly #910021-00 you referenced can be found as a quantity of 2 on our site with part #RM-910024.

view full answer...

Can I Use Blue Ox Aladdin Tow Bar With Roadmaster EZ-5 Base Plate On Ford Edge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching