Availability of Replacement Roadmaster Pins for the Replacement Roadmaster Stowmaster

Question

Question:

I dont need to buy the replacement cross bar. Do you sell the safety pins separate as a pair?

asked by: JD R

0

Expert Reply:

Yes we do. Depending on which pins you are referring to you would either need the Roadmaster Linch Pins # RM-910024. Or you would need the Roadmaster Replacement Base Pins with Chains and Clips part # RM-910029.

expert reply by: Jameson C

0

Answer 1

You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears: -…

view full answer...

Answer 2

I have heard back from my contacts at Roadmaster about the pin you were needing. Part #RM-910008-00 which is the 5/8 inch diameter Linchpin and Chain is the correct replacement for your Falcon Tow Bar.

view full answer...

Answer 3

Both the old Falcon 5250 tow bar and the current Falcon 2 #RM-520 will work with the same crossbar assembly part #RM-067. So if you already have the Roadmaster crossbar you should not need any additional parts to bring it together with the Falcon…

view full answer...

Answer 4

The Roadmaster Linch Pins part #RM-910024 has a shaft diameter of .308" and length of 1.537" from the end of the pin to the bottom of the retaining nut

view full answer...

Answer 5

The top linch pins on the Replacement Quick Disconnect Crossbar Assembly #910021-00 you referenced can be found as a quantity of 2 on our site with part #RM-910024.

view full answer...

Answer 6

By the photo you kindly provided, you have a nearly complete Roadmaster Base Plate Quick Disconnect Assembly. It looks like you're missing at least one linchpin, part #RM-910024. According to my Roadmaster representative, the #RM-032 adapter is…

view full answer...

Answer 7

You can use the Blue Ox Aladdin Tow Bar with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms part #RM-524454-5 for the 2015-2018 Ford Edge 3.5L V6 with the Roadmaster to Blue Ox adapter part #BX88185. This adapter is compatible wit the…

view full answer...

Answer 8

The pin you need is part #RM-910008-00. The diameter is .74 inches and the length is 4 inches from the flange to the tip, as measured with a digital caliper.

view full answer...

Answer 9

The pin hole on the removable arms of the (discontinued) Roadmaster EZ5 base plate kit for your 2015 Chevrolet Equinox, is 3/4 inch. This is also true for the Roadmaster Direct-Connect Base Plate Kit #RM-523193-5, which is the new version, that uses…

view full answer...

Answer 10

The correct lynch pins to use with the Roadmaster Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters #RM-910044 is the #RM-910024. These are sold in a pair.

view full answer...

Answer 11

As indicated in the provided photo, the holes in the removable drawbars of the Roadmaster #RM-521424-5 base plate kit accept a 3/4 inch diameter pin, such as part #RM-910029 so the holes are actually fractionally larger than 3/4 of an inch. According…

view full answer...

Answer 12

Quality-wise, both tow bars are equivalent. Both have the same 6,000 lb capacity, but the StowMaster #RM-501 is a car-mount and the Falcon 2 #RM-520 is a motorhome mount. The Stowmaster connects to the motorhome via a coupler installed on the tow…

view full answer...