Roadmaster Safety Chains and Cables - Safety Cables - RM-643 Review Video

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

I do have an option for you but most factory motorhome trailer hitches have a maximum capacity of 5,000 lbs. If you have a larger vehicle that you need to tow, this will have to be replaced. I don't have a bolt-on option for you but still an…

The diodes of the Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR that you referenced were not designed to be replaced. They are very reliable though so it's not something you'd really need to worry about. They are under the…

In addition to the Roadmaster Tracker #RM-020 tow bar you referenced, you will need a base plate kit, safety cables, wiring and depending on the states you will be traveling in, a supplemental braking system. The Roadmaster #278-1, which fits all PT…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

I spoke with my contact at Ark and he sent me a dimensional drawing of the mounting bracket that the Extreme Off-Road Trailer Jack w/ Dual Wheels #ORJW500D has. The dimensions are in millimeters.

I strongly recommend following the directions to install the safety cables. Roadmaster states safety cables #RM-643 must connect the towing vehicle to the towed vehicle (your 2016 Chevy Sonic) with the RV being the anchor. I have added a photo from…

The first thing you should do is check the bar with a straight-edge to determine if it is bent. If you determine that it is straight you will need to disassemble it and clean it. There is a nut on the forward end by the pivots, and a keeper assembly…

I have a couple options which will allow you to adapt your Blue Ox tow bars to fit a Roadmaster base plate. First the Tow Bar Adapter #RM62ZR will fit in place of the direct connect arms you got with your base plate. Another option is the Adapter Kit…

When using D-ring adapters, like part #BX88357, to flat tow your Jeep you generally need to connect the safety cables to the Jeep's frame. One way to connect to the frame using cables like #RM-643 is to add extensions #RM-910648-20.

We have items available for flat towing a Kia Soul because depending on specific specs of each vehicle some are able to be flat-towed. We always defer to the recommendation that our neighbors follow their vehicle specific guidelines. If your vehicle…