Recommended Hitch for 2015 Toyota Sienna XLE

Question

Question:

Hitch for a 2015 sienna xle . not sure which one is right?

asked by: Dave

0

Expert Reply:

We offer both light-duty 1-1/4-inch Class II and medium-duty 2-inch Class III hitches for your 2015 Toyota Sienna XLE. All can be seen on the linked page. The two linked articles offer helpful background on hitch types.

We always recommend opting for the higher capacity 2-inch hitch when the choice exists. This hitch size offers better compatibility with a wide range of hitch-mount accessory items like bike and cargo carriers and a Class III will usually also have a higher weight capacity. I recommend the Draw-Tite # 75237 since it does not require fascia trimming and because of its substantial 675-lb tongue weight (TW) rating.

The linked instructions and install video will give you a complete picture of the installation process.

If you intend to tow a trailer you'll also need a ball mount, hitch ball and wiring harness. The recommended ball mount is part # C45230 and this can be used with either 1-7/8-inch ball # C40051, 2-inch ball # 40038 or 2-5/16-inch ball # C40007. For wiring use kit # 118648.

If towing is not in your plans please let me know your intended use and I will be glad to help further.

expert reply by: Adam R

0

Answer 1

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 2

Yes, in addition to a trailer hitch you will also need to install a wiring harness on your 2013 Toyota Sienna to power the trailer's signal lights during travel. Starting with the hitch I highly recommend the etrailer.com #e98837 that allows for…

view full answer...

Answer 3

The trailer hitch I recommend for your 2019 Toyota Sienna is the Draw-Tite Trailer Hitch #76112 because if you plan on towing, this hitch is rated for weight distribution and the similar hitches are not. When we test fit the Draw-Tite Hitch #76112,…

view full answer...

Answer 4

My contact at SportRack tells me that they haven't come across any fit problems with the H3, but I'd recommend taking two measurements for confirmation. There are two possible clearance problems you could encounter, if the shank on the rack…

view full answer...

Answer 5

This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch #C13343 for…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Of the 2 inch Curt hitches we offer for your 2017 Toyota Sienna the part #C13343 is the one to go with as it has only the hitch opening visible down below the bumper. The instructions do recommend removing the rear fascia to install the hitch. We…

view full answer...

Answer 8

Each of the trailer wiring harnesses that fit your 2011 Toyota Sienna are designed to store in your trunk/rear storage area when not in use - the Hopkins Vehicle Wiring Harness #HM11143495 and T-One Vehicle Wiring Harness #118498. You may be able to…

view full answer...

Answer 9

In order for your Sienna to activate the electric drum brakes on your trailer it will need to have a 7-way trailer socket. This connector carries lighting signals, 12V maintenance power for the trailer's battery (or power for it's lights) as…

view full answer...

Answer 10

The Curt hitch #C13343 that you referenced weighs a total of 39 lbs. With this and a standard ball mount you'd probably be adding about 45 lbs to the rear of the vehicle. If you were concerned about suspension sag we have the Timbren kit part…

view full answer...

Answer 11

Both the Curt Hitch part #C13105 and the Draw-Tite part #75237 will fit pretty tight to the rear of your 2014 Toyota Sienna. I attached an install pic of both hitches to show you that they both hitches will basically be just as tight. The e-coating…

view full answer...

Answer 12

According to the Magnusson-Moss Warranty Act, unless a modification that you added to your vehicle actually causes the problem, your dealer must honor the warranty. We do have some trailer hitch receiver options that are confirmed to fit your 2017…

view full answer...

Recommended Hitch for 2015 Toyota Sienna XLE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching