Will Brophy Camper Hold Downs Fit a 1997 Dodge Ram 1500 Pick Up Truck

Question

Question:

Will the camper tie down mounts fit the 1997 dodge ram 1500 pick up bed?

asked by: larry k

0

Expert Reply:

The Brophy Camper Hold Downs, part HSSF, will fit your 1997 Dodge Ram 1500, as long as it does not have a stepside bed.

They are a universal fit item and will fit most full size pick up beds as long as they are not stepside or Dually models.

expert reply by: Patrick B

0

Answer 1

These Camper Hold Down, part #HSSF, are universal fit items made to fit most trucks. These hold downs wrap around the truck bed rails and are mounted inside the bed. Like other products, they do not fit in the stake pockets. Some dual rear wheel beds…

view full answer...

Answer 2

The Brophy Clamp On Camper Tie-Downs, part #HSSF are designed to fit most full-size non-dually pickups. There are a few things you will need to check to make sure these tie-downs will work for your 2016 Ram 3500. First, the bed rail width cannot…

view full answer...

Answer 3

We do offer Brophy tiedowns that will fit your 2005 Dodge Ram 2500 as long as it does not have a stepside bed or dual rear wheels. The Brophy tiedowns that will work for your application is part #HSSF. By using these tiedown brackets, you will not…

view full answer...

Answer 4

The fit of the HSSF bracket will depend on the sidewall construction of your truck bed. Take a look at the provided photo. In the center panel, you can see that the bracket attaches under the lip of the truck bed, and the foot meets the inside of the…

view full answer...

Answer 5

The Brophy Camper Hold Down Brackets, #HSSF, are a universal fit item that will work on most full-size trucks including your 1992 Chevrolet 2500. Some dual rear wheel beds and bed liners that block the top edge of the side rails can cause a problem…

view full answer...

Answer 6

The Brophy Camper Hold Down Brackets, part #HSSF are a universal-fit item that will work on most full-sized trucks, including your 2004 Ford F-250 Super Duty 4x4 straight cab. Some Dual rear wheel truck beds may interfere with the installation of the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 10

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 11

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Will Brophy Camper Hold Downs Fit a 1997 Dodge Ram 1500 Pick Up Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching