Camper Tie Downs For a 2500 lb 1993 Jayco 950 Camper on a 1992 Chevrolet 2500
Question:
Will these work on my 1992 Chevy 2500? I have a 1993 Jayco 950 Camper weights approx 2500 lbs.
asked by: Mike
Expert Reply:
The Brophy Camper Hold Down Brackets, # HSSF, are a universal fit item that will work on most full-size trucks including your 1992 Chevrolet 2500. Some dual rear wheel beds and bed liners that block the top edge of the side rails can cause a problem with the installation of these hold downs.
Be sure you verify that you will have enough room to install these hold downs without interference from the dual wheel well or a bed liner. These hold downs do not install in stake pockets, but wrap around the bed rails and are mounted inside the bed under the side rails.
I have attached a photo showing a camper hold down installed on a truck bed side rail.
I would also recommend the Camper Tie Down Hardware Package, # TDHP. This kit comes with four 3/8 inch turnbuckles, four S-hooks and four chains. This should include everything you need to secure your 1993 Jayco 950 Camper to your truck.
These tie downs to do not have a weight capacity limit and will work for any camper that is designed to fit your truck bed.
Products Referenced in This Question
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
- Accessories and Parts
- Camper Tie-Downs
- Turnbuckles
- Standard Disconnect
- Locks Not Included
- No Tension Indicators
- Bed-Mounted
- Powder Coated Steel
- Brophy
more information >
Product Page this Question was Asked From
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
- Camper Tie-Downs
- Front and Rear Tie-Downs
- Bed-Mounted
- Universal Fit
- Powder Coated Steel
- Brophy
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Camper Tie-Downs
- Search Results: truck camper
- Shop: Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Video: Review of HappiJac Camper Tie-Downs - Front and Rear Tie-Downs - LC182860
- Video: Brophy Camper Tie-Downs - Front and Rear Tie-Downs - HSSF Review
- Search Results: torklift
- Search Results: torqlift
- Q&A: Will the Brophy Camper Hold Down Brackets Fit a 2004 Ford F-250 Super Duty 4x4 Straight Cab 8 ft Bed
- Q&A: Will Brophy Clamp On Camper Tie-Downs Work With 2016 Ram 3500 Pickup Truck
- Q&A: Availability of Camper Tie Downs for 2012 Ram 3500 Dually
- Q&A: Will Brophy Tiedown Part # HSSF Work With a Cabover Camper on a 2005 Dodge Ram 2500
- Q&A: Can I Use # HSSF Camper Hold Down Brakets in My 2000 Dodge Ram for my 11-1/2 ft Camper Shell
- Q&A: Will Brophy Camper Hold Downs Fit a 1997 Dodge Ram 1500 Pick Up Truck
- Shop: Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
- Shop: Brophy Basic Turnbuckle for Camper Tie-Downs - Qty 1
- Shop: Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal
- Shop: Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
- Shop: HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
- Video: Valterra RV Sewer - Waste Valves - T50 Review
- Search Results: camper tie~downs
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: How to Mount a Truck Bed Camper
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: truck camper tie down anchors
- Video: Brophy Angled Hold Downs for Truck Bed Campers Review
on Camper Tie-Downs
