Wall Thickness of the Blue Ox Hitch Reducer Sleeve # BX88187

Question

Question:

What is the wall thickness on the blue ox 2 1/2inch to 2inch trailer hit reducer.

asked by: Dan

1

Helpful Expert Reply:

I went out into our warehouse to measure the wall thickness of the Blue Ox Hitch Reducer Sleeve # BX88187 that you referenced and found that it measures 1/4 inch thick. Which if you think about it that makes perfect sense considering the fact the reducer takes a 2-1/2 inch hitch and converts it to a 2 inch hitch.

expert reply by: Jameson C

1

Answer 1

The Blue Ox Hitch Reducer Sleeve - 2-1/2" to 2" Trailer Hitch #BX88187 you were looking at does not reduce the capacities of your trailer hitch receiver and it is perfectly compatible with the Blue Ox BXW1200 weight distribution hitch. This…

view full answer...

Answer 2

I have a better solution for you than a sleeve adapter. What would be better for you would be a weight distribution shank that is designed for 2-1/2 inch hitches like the #EQ90-02-4800. The great thing about weight distribution shanks is that they…

view full answer...

Answer 3

Yes, you most certainly can simply use a reducer sleeve as opposed to a new shank for your Weight Distribution (WD) setup. I recommend the Curt Reducer Sleeve #C45405 which will reduce your 2-1/2" hitch receiver opening to a 2" opening so…

view full answer...

Answer 4

Most of the domestic truck manufacturers are putting Class V trailer hitches with a 2-1/2 inch receiver on their 3/4 ton trucks, including Dodge. This is mainly because they are building their trucks stronger and stronger each year and they need to…

view full answer...

Answer 5

If you have a Class III trailer hitch, then it will have a 2 inch receiver opening. When you measure the receiver, make sure that you are measuring just the width of the opening and not the outside dimensions. Take a look at the FAQ I have linked for…

view full answer...

Answer 6

Yes. You can use the Blue Ox Sway Pro #BLU77FR on your 2010 GMC Sierra 2500 HD with the 2-1/2" hitch with the factory sleeve reducer. You could also use the Blue Ox Hitch Reducer Sleeve - 2-1/2" to 2" Trailer Hitch #BX88187 to…

view full answer...

Answer 7

A high-low adapter like the Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW #RM-058-4 is designed for use when flat towing which is pulling a vehicle behind a motorhome. The reason an adapter is needed is…

view full answer...

Answer 8

There are two ways you can convert the 2-1/2" receiver on your 2020 Chevrolet Silverado 2500. We don't have a 2-1/2" to 1-1/4" adapter, so these are the only options. The first way is less stable. It involves using two adapters:…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

We have several different 2-1/2" to 2" reducer sleeves for trailer hitches. There really isn't much difference between them from manufacturer to manufacturer. The ones made from more reputable manufactures will typically have a tighter…

view full answer...

Answer 11

For your 2-1/2" receiver you will need the Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY99FR. This pin will fit your 2-1/2" receiver and 2" hitch using a Adapter/Reducer like #325-GH-007. The Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY39FR…

view full answer...

Answer 12

The Roadmaster High-Low Adapter part #RM-058-4 is designed for flat towing applications and is not rated for the tongue weight associated with straight pull towing. If you need a ball mount with a 4" drop then I recommending using the Curt…

view full answer...

Wall Thickness of the Blue Ox Hitch Reducer Sleeve # BX88187

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching