Blue Ox Hitch Adapters - Hitch Reducer - BX88187 Review Video

For a set of crossbars and the feet that will attach them to your Retrax XR on your 2022 Ford F-350, you can use the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers #RRVA180B-RRRLT600. According to Retrax, this will fit any of…

The Curt Hitch Adapter #C45405 will not reduce the tongue weight of your hitch. Many adapters that extend the length will reduce towing capacity based on tongue weight, but this adapter isn't one of them. It will work fine with the Curt TruTrack…

The B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 that you referenced does not have a flange that goes around the end of the hitch tube like the factory sleeve adapter has. We don't have any options for hitch reducers that do have the flange…

The hitch reducer sleeve I strongly recommend for the 2-1/2" hitch on your 2019 Ford F-250 is the B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 because it has two sets of pin holes to allow for a more custom fit on your Ford hitch. If your…

Yes, the B&W Hitch Receiver Reducer Sleeve 2-1/2" to 2" #BWRHXA2182 will fit inside the 3" to 2-1/2" #BWRHXA2183. The hitch pin holes will line up correctly.

I haven't heard of the Curt 7-way tester not working with OEM brake controllers. There was a Tekonsha tester that had problems with Dodge and GM trucks so it is possible. We have been able to confirm that the Pollak 7-Way to RV Socket LED Circuit…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

Since you have an older trailer, the brakes could have possibly been switched from electric to hydraulic or the other way around. Even on newer campers, unless it is just purchased from the manufacturer, it would be just a guessing game for someone…

The overall length of the Buyers Products 2-1/2 inch to 2 inch hitch adapter part #337RTA252 is 5-3/4 inches and the hole is 4-1/2 inches from one side of it and 1-3/4 inches from the other.

I may have a solution for you, but we do not have a 2-1/2" Rise/Drop adapter for flat towing with a 6" rise/drop. Since you've got about 3" up or down to work with when it comes to how level to the ground your tow bar must be, you…

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…