Replacement SKS Lock Core for Yakima Racks and Carriers - A137

See what our Experts say about this Yakima Accessories and Parts

• Removing Stuck Key From Yakima Skybox
  Stuck keys are at times very difficult to remove, even after spraying lubricant. We have heard that some people have luck using a paperclip along side the stuck key to free it by wiggling it. You could try using a pair of pliers or vise grip to pull the key out of the lock. As a final resort you may have to get a locksmith to help. They may need to drill out the old key but should be encouraged to try and keep from damaging the lock core. If the lock core needs to be replaced, you...
  view full answer...
• Replace Missing Key on Yakima SkyBox Roof Cargo Box
  The only way to determine the key number would be to drill out one of the lock cores, remove it so it's more or less intact and get the lock number that's engraved of the outside of the core. The problematic thing here is getting the lock core removed without completely damaging it. If you can successfully do that, please reply with the lock number and I'll get you the part number for the replacement lock and key. Honestly, your best bet would be to have a locksmith drill out the locks...
  view full answer...
  
• Replacement Handles for Yakima SkyBox Pro Cargo Box
  I may have a solution for you, but the photos you provided don't shed any light on what you've got. I'll start off by saying that the Sky Box series of cargo boxes made before 2009 cannot have the handles replaced; these are an "S" shaped handle, so if your box has those there is not a replacement part. However, if your box is newer than that it would have used the SuperLatch style handles, which can be replaced with the Replacement SuperLatch Handles for Yakima SkyBox Cargo Boxes - Qty...
  view full answer...
• Ordering More than 8 Yakima Lock Cores All Keyed Alike
  Yakima's lock cores only come as many as 8 in a pack using part # Y07208. The only way to get two more locks keyed the same as the first 8 is to wait till you receive the pack of 8 and see what lock number they are then order two more of that number individually. They can be ordered using the lock number. For example, part # Y8771-A137 is for lock core A137
  view full answer...
  
• Yakima Bike Cables And The SKS System
  You can grab the Replacement Cable Lock Assembly # Y8890202 and the replacement should be the same as the original. If you got the cable and for some reason it doesn't have the right locking core,. then you can go ahead and get another locking core that will be keyed alike with the cable lock like this one # Y8771-A137. There is usually a number on the core letting you know which key will open it!
  view full answer...
• Replacement Lock Cores, Keys and Mounting Hardware for Yakima Rocketbox
  The correct mounting hardware/u-bolts for your Yakima Rocketbox is the part # 8870098. If your lock core is still locked your options are to drill it out to allow removal or to obtain the correct matching key for that specific SKS lock core so you can unlock it and then use the Control Key to remove the lock core. Yakima replacement keys are available as part Y8772-_ _ _ _ where the last 4 characters are the lock/key number, such as key part # Y8772-A137 which fits lock A137. Then for...
  view full answer...
• Replacement Keys for Yakima SkyBox Roof Cargo Box
  Unfortunately, without knowing the key number, I can't suggest a replacement key. You'll need to drill out the existing lock cores without damaging the housing they sit in, so perhaps you'd be best off having a locksmith do this for you. Most SkyBoxes have 2 locks, so if you can get one core removed without destroying it, you can get the lock/ key number that's engraved on the side of the lock core, and order a replacement core by typing the lock number into the search box on our website....
  view full answer...
  
• Do You Need To Remove Yakima Lock Core To Determine The Correct Replacement Key?
  That is correct. You will need to use the Replacement Control Key for Yakima Same Key System # Y8007835 to remove your current lock core, but the lock core will need to be unlocked for the control to be able to remove the core. If the lock core is locked you will need to have a locksmith unlock it for you first. Once the core is removed you will see the key code stamped in the side of the lock core as shown in the included picture of the # Y8771-A137. For example if your lock core was...
  view full answer...
  
• How To Find Correct Replacement Key For Yakima SKS Lock Core
  To get the correct replacement key for your Yakima lock you will need to know the lock number. If the lock is unlocked you can use the Replacement Control Key for Yakima Same Key System # Y8007835 to remove your lock core and the key number will be on the of the lock core. For example if your Lock Core says A137 like the # Y8771-A137 you will need Replacement Key # Y8772-A137. If the lock is currently locked you will need to drill it out and replace the lock core.
  view full answer...
• Recommended Lock Cores And Keys For Yakima Roof Rack
  The Replacement SKS Lock Core for Yakima Racks and Carriers - A137 # Y8771-A137 is a specific lock for key A137 # Y8772-A137. In the same way, lock core # Y8771-A145 will work with key # Y8772-A145. Since you don't need to match a specific key number, I recommend the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204 which comes with 4 cores and 2 keys along with a control key.
  view full answer...
• Can You Order Yakima HitchLock With A Specific Lock Core To Match Other Yakima Products
  Absolutely! You will want the Replacement Body for Yakima HitchLock 2007 and Newer # 8820048 as it does not include a lock core, and then you will need to find the lock code of your current lock cores to determine the correct lock core. For example if your current locks are stamped A137 you would want lock core # Y8771-A137 and replacement key # Y8772-A137. The lock code will be on the side of the lock as shown in the included picture, and you will need to use the control key # Y8007835...
  view full answer...
  
• Replacement Speed Knob With Wedge for Yakima Full Swing Bike Rack
  I reached out to my contact at Yakima regarding the speed knob on your Yakima FullSwing bike rack. The wedge on the end of the speed knob is not a seperately available part. You would need to purchace the Yakima # 8880904 Replacement SpeedKnob. If your speed knob is equipped with a lock cylinder - don't forget to move that to your new one using a change key. If you didn't have one but would like to add one you can additionally order the Yakima # Y8771-A137 lock core and # Y8007835...
  view full answer...
• Yakima Replacement Key and Lock Core for Older Roof Rack
  Yakima won't keep the records for your lock number. If you have an unlocked system then you will simply need the control key # Y8007835 to remove the cylinder. Once removed the cylinder will have a number on the side, that will let you know what key number or what cylinder number you can match it to if you want additional cores and/or keys. If your cylinder is locked, then you will either need to take it to a locksmith or carefully drill it out making sure not do damage any housing....
  view full answer...
  
• Which Locks Can I Use with a Yakima Sweetroll Kayak Carrier
  The Yakima Sweetroll Kayak Carrier # Y04074 does not come with lock cores but you can add them with the Yakima Same Key System (SKS) Lock Cores # Y07204 (pack of 4). If you just need a single lock core replaced and it has A137 stamped on the body of the core, you can use the # Y8771-A137 as a replacement that will work with your current keys. If you've got a different number stamped on the lock cores or your existing key, let me know what number you've got and I can help you locate the...
  view full answer...
• Is There a Lock Available for Threaded Yakima Hitch Pins?
  There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock # Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack and you prefer to have this match them, you will need to know your core number. For example, if you have A137 cores, you will need # Y8771-A137. You may also need the change key # Y8007835 to pull the cores out if you do not already have one.
  view full answer...
  
• How Does the Yakima Slim Shady Bracket 8880737 Measure?
  I spoke to Yakima and the Replacement Clamp Assembly # 8880737 will measure 1-3/4" tall. 5-1/4" long, and 2-1/8" wide, This is designed as a direct replacement for the Yakima SlimShady roll-out awning # Y36VR and be keyed alike to the core you may already have. As an example, if you have the A137 core number, you can use the Replacement SKS Lock Core for Yakima Racks and Carriers - A137 # Y8771-A137, but you will also need the Replacement Control Key for Yakima Same Key System # Y8007835...
  view full answer...
• Compatibility of Mounting Bracket for Yakima Skyrise Tent with Yakima HD Crossbars
  This Replacement Mounting Bracket # 8880735 is for the Yakima SkyRise Rooftop Tent like # Y07437. These tents and their clamps are compatible with most aftermarket round, square, aero, and elliptical crossbars including Yakima HD crossbars like # Y01156. I recommend getting replacement lock cores # Y07204 as well so that you can use the same key with both your new bracket and your old brackets. If you know the key numbers of your other mounting brackets, you can order a single separate...
  view full answer...
• Enough Space in Yakima Roof Box for 2 Sets of Golf Clubs?
  The overall length of the Yakima SkyBox NX 16 Roof Cargo Box # Y07335 is 75-1/2" long, but you can see how it curves up in the front and the back. For actual flat space on the bottom, you have 71" to work with. Since the average golf travel bag is around 50" long, you definitely have enough space to lay your equipment out flat, side by side. If you are a fan of the Yakima boxes though, you might also be interested in their newer design, the Yakima GrandTour Rooftop Cargo Box # YA74FR....
  view full answer...
• Replacement Hitch Pin and Lock for Yakima Fourtimer Bike Rack
  I checked with Yakima and for their Fourtimer bike rack part # Y02469 the correct hitch bolt is the part # 8890260 and then for the matching lock assembly you'd need the # 8820048.
  view full answer...

Do you have a question about this Accessories and Part?