LockNLoad SL Adapter for Yakima SkyLine, TimberLine and TrackTower Towers - Qty 4

See what our Experts say about this Yakima Accessories and Parts

• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Carrying A Yakima LockNLoad Platform On 2007 Chevy Suburban
  The Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
  view full answer...
• 2021 Jeep Grand Cherokee Trailhawk Platform Style Roof Rack
  There may be slight differences between the 2020 and 2021 Grand Cherokee, but not much. If you're wanting to get a platform on your 2021 Jeep Grand Cherokee I do have one that is confirmed to fit. All You need is to get the Yakima LockNLoad Platform # Y05044, SkyLine Towers # Y53TR, SL Adapter # Y05042-2 and these Landing Pad 18 # Y00244. This is just like the rhino rack platform. It will install similar to the rack that I put on this 2019 Cherokee so check that out!
  view full answer...
• Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru Outback
  I do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar. SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control...
  view full answer...
• Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised Rails
  Yakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Yakima LockNLoad that Fits 2023 Toyota RAV4
  Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Platform Tray that Fits Roof of 2018 Chevy Tahoe
  For your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
  view full answer...
• Platform Rack For 2018 Ford Expedition XLT
  We have a platform rack for you but the Rhino Rack platform is not one that will work. I do have a Yakima platform # Y05045 that will work for your 2018 Ford Expedition. You just need this adapter # Y05042-2 and these towers # Y33TR. This will add about 4-3/4 inches from your roof to the top of the platform. It will add less height to your side rails so it is rather low profile. This rack is the same as the rhino rack but just Yakima. I've included a video for you to watch so be sure to...
  view full answer...
• Can Yakima LockNLoad Platform for 2011 Jeep Patriot Support Yakima SkyRise Tent
  The Yakima LockNLoad Platform Roof Tray part numbers # Y05045, # Y33TR, and # Y05042-2 that fits your 2011 Jeep Patriot can be used with roof top tents like the Yakima SkyRise Tent part # Y79XR that you mentioned without requiring any additional support.
  view full answer...
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• Platform Tray/Roof Rack that Fits 2018 Jeep Grand Cherokee Trailhawk
  For your 2018 Jeep Grand Cherokee we don't have a Rhino Rack Pioneer platform that fits your roof rails directly but we have the very similar Yakima LockNLoad Platform Tray setup part numbers # Y05044, # Y53TR, # Y05042-2, and # Y00244 which does fit your rail setup directly. This tray is 55 inch by 49 inch. We can't recommend opening your roof with this installed though as it might interfere but also it's going to cause quite a bit of wind noise.
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Roof Platform Rack Options for a 2014 Jeep Grand Cherokee
  We have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• Platform Rack Recommendation to Fit with Raised Rails on a 2021 Subaru Ascent
  As of right now I do not have any information as to if the Rhino Rack Platform will be compatible with your 2021 Subaru Ascent. If you want to get a platform on your 2021 Subaru Ascent, you can use the Yakima LockNLoad # Y05045 and use these adapters # Y05042-2 and these towers # Y33TR. The towers just wrap around your current side rails. This would only add about 4 inches to the top of your roof and it's your only roof tray option.
  view full answer...
• Platform Rack for 2021 Honda Pilot With Flush-Mounted Rails
  There is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y53TR - LockNLoad SL Adapter # Y05042-2 - Landing Pad...
  view full answer...
• Will Platform Rack Fit Raised Side Rails of 2017 Toyota Land Cruiser
  The Yakima LockNLoad Platform Roof Tray # Y05045 is actually designed to do exactly what you are wanting, which is mount directly to the raised side rails of your 2017 Toyota Land Cruiser without crossbars. To do so you'll also need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2.
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side Rails
  If you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
  view full answer...

Do you have a question about this Accessories and Part?