Roof Platform Tray that Fits 2015 Chevy Tahoe

Question

Question:

I would like to fit a rhino rack backbone and pioneer platform to my 2015 Chevy Tahoe. Is it possible. Are the backbones universal?

asked by: Joe C

0

Expert Reply:

I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.

expert reply by: Jameson C

0

Answer 1

The Yakima towers will not connect to the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 60" Long x 56" Wide, part #JB0702, on your 2011 Ram 3500. You can attach Rhino-Rack Legs and and Vortex Aero Crossbars to the…

view full answer...

Answer 2

Yes, the Rhino Rack Pioneer Platform Accessory bars part #RR43120B that you referenced will allow you to install the Yakima SkyBox 12 part #Y07334 that you are interested in! I attached a picture that shows a cargo box attached to these bars for you…

view full answer...

Answer 3

The Rhino-Rack Pioneer Platform Rack 84" Long x 49" Wide #RR73AB, which is a fit for your 2011 Toyota Land Cruiser, can certainly accommodate the Thule Force XT L Rooftop Cargo Box - 16 cu ft - Black AeroSkin #TH6357B. In order to do so,…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 6

Sounds like you have a Pioneer Platform. To attach the Rhino-Rack Ski and Snowboard Carrier item #RR574 to it you will need either the 53" long item #RR43138B depending on what size your Pioneer Platform is. My email is included below if you…

view full answer...

Answer 7

The correct Rhino-Rack Pioneer Platform Rack for a 2007 Toyota FJ Cruiser (Bare Roof Models Only) is part #RR75TB along with the required Backbone Mounting System #RRRFJB1. The platform can indeed be used for carrying kayaks. That said, the Thule…

view full answer...

Answer 8

Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…

view full answer...

Answer 9

We do have the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 that will allow you to use an underslung axle on your trailer. The Dexter Trailer Axle w/ Electric Brakes #8327816-EB is a 5,200lb axle. It includes 12" brakes and a 6…

view full answer...

Answer 10

We do have a pressure relief valve for your Furrion RV Tankless Water Heater #FR93FR. The Camco RV Water Heater Temperature and Pressure Release Valve #CAM10423, is a 1/2 valve with a 4" probe that will help protect your RV's water heater…

view full answer...

Answer 11

The pressure relief valve on your Furrion RV Tankless Water Heater #FR68SR could potentially be faulty from the manufacturer but before you make a warranty claim to Furrion you should test to see if the valve is correctly seated. Pull the lever on…

view full answer...

Answer 12

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

view full answer...