Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru Outback

Question

Question:

I would like to know if you can install a Rhino Rack Pioneer platform on a 2020 Subaru Outback with factory roof rack and integrated crossbars?

asked by: Roger G

0

Expert Reply:

I do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar.

SkyLine Towers for Yakima Crossbars part # Y53TR
Landing Pad 27 for Yakima SkyLine And Control Towers part # Y46VR
LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2

expert reply by: Conner L

0

Answer 1

The T-Slots on the Yakima LockNLoad Platform Rack #Y05044-39 have the same dimensions as standard crossbars so you can basically use any brand of T-Bolts to accomplish your job. For example, you can use the Thule Square T-Bolt #853208914 or the…

view full answer...

Answer 2

You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part #Y53TR,…

view full answer...

Answer 3

For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide #Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine…

view full answer...

Answer 4

Your 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part #Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for…

view full answer...

Answer 5

The highest capacity roof rack option we offer for a 2020 Subaru Outback Wagon which will replace the factory crossbars is the Yakima JetStream Crossbar System part #Y00425, part #Y53TR, and part #Y46VR which will provide a 165 lb capacity.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 10

Hey Erik, thanks for reaching out! We can definitely get you to the #ETBC7 kit building off of your Curt Trailer Connector Adapter #C57672. What you need is the Wiring Kit #5506 which has everything else in it aside from the circuit tester. If you…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already have…

view full answer...