TireMinder Straight Valve Extender - 4" - Qty 2

Video Transcript for Review of TireMinder Tire Repair Tools - Straight Valve Extender - TM37SR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at these TireMinder four-inch long Straight Valve Extenders. It's for a quantity of two of those. Now these valve extenders will allow you to add an additional straight four inches of length to your metal valve stems to let you easily inflate or check the air pressure on those hard to reach valve stems. Now these are designed for metal valve stems. They're not recommended for use on rubber valve stems.

These are a nice nickel-plated brass construction. They are TPMS compatible. And you can see to install, it's pretty simple. This end right here is what will screw onto your current valve stem. And the other end, you take off your metal valve cap, and you can add air to your tires or check the air pressure.

And then just to show you how this installs, I happen to pull a metal valve stem right here. So this will be on your vehicle. What you'll do is just take off your valve cap, take your extension, line it right up, and then go ahead and start twisting it on, turning it, tightening it down. And you do wanna make sure to tighten it all the way, so it'll put pressure on the valve to open it down here, and then you'll control it from up here. So now when you go to check your air, to add air, or to check your pressure, the schrader valve right up here, when you push that valve down in, it'll push that one down, and you'd be able to access your air pressure.

And then when you're done, just put your valve cap back on. But again, this is a four-inch extension. And just to show you that, I'm gonna take a ruler, and you'll be able to see we go from the very end. It's four inches from where it starts. So it's a four inch-extension, and it is for quantity of two.

But that should do it for the review on the TireMinder four-inch long Straight Valve Extenders.