Replacement Socket for Superwinch Superwinch S4000, S5000, S9000, X9000, and EP Series Winch Remotes

Video Transcript for Superwinch Electric Winch SW90-25048-01 Review

Today we're going to review part number SW90-25048-01. This is the Superwinch replacement remote switch socket for the Superwinch gp series and ap series wenches. This remote switch socket is installed on the solenoid cover of the winch and then the wires would run to the solenoid. The socket is where you plug in your hand-held remote to control your winch. On the outer bracket when you install this, this would go on the inside of the cover and this outer bracket would go on the outside. You bolt it together and included with this outer bracket you can see it's connected an integrated dust cap.

What's nice about that, when it's installed and your remote is not plugged in, you can just bend that dust cap over and it helps protects the terminals, protect it from the elements or any damage. Again, this switch socket is designed to fit the Superwinch gp series winches, numbers 1800, 2300 or 3000 models, and it fits the ap series winches models 9.0, 12.5 and 16.5 models. That should do it for the review on part number SW909-25048-01, the Superwinch replacement remote switch socket for the Superwinch gp series or the ap series winches.