Rack'Em 2-Hook Multi-Tool Rack for Enclosed Trailers

Video Transcript for Rackem 2 Hook Multi Tool Rack Review

Today we're going to be taking a look at Rackem two-hook multi-tool rack for enclosed trailers, part number RA-11. The Rackem multi-tool rack has a unique, durable, hammered paint finish. Going to give you lots of years of good service without any kind of deterioration. We got sturdy hooks that come out. That really very flexible or pliable so they'll hold up for a long time. They also have a rubber-coating there to help hold gear in place, keep it front sliding around, and also protect anything that might be stratchable. Let's go over a couple of measurements now.

From the top of our hanging hook to the very bottom of our lower hook, looking at about 14-1/2". From the outside of our hook here in the middle to the opposite side, got 14". From our mounting surface or our wall to the front edge of our hook . that would be easier if I did it that way so you can see. It's going to be about 4-3/8".

The throat of the hook itself, here to here, 2-3/4". It's got a nice, wide gap on it. It's going to allow you to hold, hang many different kinds of things, whether it's a couple of hoses, a couple of extension cords, things like that. Or even large enough to also hold a broom on top of that, keep in place as you're heading down the around and getting to your next job. Installing our multi-tool rack is a pretty easy process. It's designed to go over the top rail on most of your rounded roof enclosed trailers. With this one being more of the flat top style we don't have that frame rail that runs along there for this to rest on.

What we've done, just took some 2x6s. Use 2x6, 2x4, whatever you decide. We've cut an angle on the backside of it. You'll then mount that right into the our secure frame locations going down through there. That gives us a very nice spot to hang our rack right up on there, gives it nice support. Then we're going to have our mounting locations.

We'll have one, two, three; one, two, and three on each side. You can choose which ones of those you want to use. Please keep in mind, the hardware is not provided. The hooks at the top are going to support most of the weight. Our screws are going to be in here to help to keep it from moving side to side. Now we have options with the hooks. As you can see, there's a tab on them here. That tab allows it to roll out of the way. If we want it mounted in a fixed location or a fixed mounted spot to where they'll be held out, we can simply add in another screw in that tab and that will keep them fixed. That will complete today's look at the Rackem two hook multi-tool rack for enclosed trailers, part number RA-11. .