Rhino-Rack Accessory Bars for Pioneer Platform Rack - 53" Long - Heavy-Duty Bars - Qty 2

See what our Experts say about this Rhino Rack Accessories and Parts

• Which Track Nut for C-Channel on Rhino Rack Pioneer Platform Accessory Bars
  It sounds like you just need the track nut/channel nut (whatever you'd prefer to call it), and while they're not sold as singles you can pick up a pack of 4 with the RotopaX Pack Mount Adapter Kit for Rhino-Rack Pioneer Platforms # RR43203. You can use the track nut with any M6 bolt to attach accessories to your Rhino Rack Pioneer Platform Accessory Bars # RR43120B.
  view full answer...
• Will the Nautic 581 Kayak Carrier Work w/ Rhino Rack Heavy-Duty Crossbars?
  Yes, the Rhino-Rack Nautic 581 item # RR581 will work with the Rhino-Rack Accessory Heavy-Duty Bars item # RR43120B but you will need longer bolts. They are the Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Kayak Carrier item # HD-FK1.
  view full answer...
• FatCat 6 fit on Pioneer Platform
  The Yakima # Y03096 "Fat Cat 6" ski and snowboard carrier, comes with clamp mounts that will attach right to the Rhino-Rack # RR43120B Accessory Bars (53") or the Rhino-Rack # RR43119B (48") without the need for any additional hardware. You might also consider the Rhino-Rack # RR43250 wind deflector/fairing to reduce wind noise and drag, not to mention is really looks sporty.
  view full answer...
• How To Get Crossbars On Top Of My Rhino Rack Pioneer Platform
  We do have accessory bars for the Rhino Rack Pioneer Platform # RR85TB, but typically the t-track dimensions from brand to brand aren't compatible. That being said, we do have a Rhino Rack solution for you. These accessory bars # RR43120B will fit your Pioneer Platform and will provide a way to connect your accessories to the top without needing to use the T-Tracks on the platform.
  view full answer...
• What is Difference Between Rhino Rack Pioneer Platform Aero and HD Bars
  Our pictures don't show it but the HD version part # RR43120B has a more square and heavier duty bar shape whereas the aero version part # RR43138B has a more elliptical and aero shape like the name implies. The aero bars are going to be quieter and look sleaker so that would be what I would go with.
  view full answer...
• Haul 2 Kayaks on Pioneer Platform Roof Rack
  I do have a solution for you to mount two kayaks, however a Hullavator must be mounted on a crossbar that extends 4 - 8 inches beyond the crossbar foot at the roof's edge. It will not mount to the Pioneer Platform. Even if you decided to mount crossbars over the platform sticking out 4" to 8" on each side, they would still not clear those ladders on the side of your vehicle. It appears that your roof is less than 60" wide so tying down two 30" wide kayaks side-by-side on the Pioneer...
  view full answer...
• Will the Rhino Rack Accessory Bars for Pioneer Platform Fit on Pioneer Tradie Platform
  Yes. I confirmed with my tech contact at Rhino Rack that the Rhino-Rack Accessory Bars for Pioneer Platform Rack - 53" Long - Heavy-Duty Bars - Qty 2 # RR43120B are compatible with a Pioneer Tradie Platform.
  view full answer...
• Recommended Accessory Bar for Rhino-Rack Pioneer Platform on Jeep Wrangler
  With your Rhino-Rack Pioneer Platform Rack with Backbone Mounting System, the accessory bar you may want is the Rhino-Rack Accessory Bars for Pioneer Platform Rack - 54" Long - Heavy-Duty Bars - Qty 2 # RR43120B. If you are concerned about the angle of install, you can use the the Roller Accessory for Rhino-Rack Pioneer Platform Racks - 50" Long # RR43131 to roll your snowboards into place. Your Yakima snowboard carrier will be able to install right on your platform using the Aero...
  view full answer...
• Width of Rhino-Rack Accessory Bars # RR43120B
  The Rhino-Rack Accessory Bars # RR43120B that you referenced have a width of exactly 2.36 inches. They also have a height of 0.9 inch. I have attached the written installation instructions for the bars below that you might also find helpful.
  view full answer...
• Weight Capacity of Rhino-Rack Accessory Bars for Pioneer Platform Rack
  The Rhino-Rack Accessory Bars for Pioneer Platform Racks like part # RR43120B don't have a listed weight capacity. Therefore, you'd simply need to make sure your load does not exceed the weight capacity of the vehicles roof. The bars have channels and measure 2.36" wide x .9" tall which you will need to determine compatibility with the desired accessory.
  view full answer...
• How To Carry Kayaks On Rhino-Rack Pioneer Platform Rack with Backbone Mounting System
  I do have an option for you but there would be no way to use the Rhino-Rack Pioneer Platform Rack or Backbone Mounting System with the Thule Hullavator part # th898. The best option to carry kayaks would be to first install Rhino-Rack Accessory Bars like part # RR43120B and then a carrier like the Rhino-Rack J-Style Kayak Carrier part # S512.
  view full answer...
• Can Yakima SkyBox Attach to Top of Rhino Rack Pioneer Platform Cargo Tray with Accessory Bars
  Yes, the Rhino Rack Pioneer Platform Accessory bars part # RR43120B that you referenced will allow you to install the Yakima SkyBox 12 part # Y07334 that you are interested in! I attached a picture that shows a cargo box attached to these bars for you to check out as well.
  view full answer...
  

Do you have a question about this Accessories and Part?