Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding
(54 reviews)
Price: $115.75
In Stock
Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding
Item # RR43196
Retail:$173.10
Our Price: $115.75
You Save: $57.35
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (54)
- Q & A (0)
- Photos
- Used (1)
Rhino Rack Accessories and Parts - RR43196
- Roof Rack
- Crossbars
- Mounting Hardware
- Antenna Mounting Brackets
- Rhino Rack
Adjustable bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform. Folding design, with 180 degrees of rotation, provides extra clearance for city driving. Includes installation hardware.
Features:
- Versatile bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform
- Also great for mounting a flag, small LED, or spotlight
- Adjustable bracket provides 180 degrees of rotation
- Folding design provides extra clearance for city driving
- Elevated antenna position allows for greater reception
- Large opening provides ample routing space for cabling and hardware
- Easy installation with included hardware
- Can be mounted so antenna runs parallel or perpendicular to vehicle
- Supplemental mounting hardware lets you mount bracket to most bull bars
- Powder coated steel is strong and corrosion resistant
Specs:
- Application: Rhino-Rack Pioneer platforms and most crossbars with top channels
- Post hole diameter: 17-mm
- Mounting hole diameter: 13-mm
- 3-Year limited warranty
43196 Rhino Rack Folding Aerial Bracket - Heavy-Duty Crossbars, Vortex Aero Crossbars, and Pioneer Platforms
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding - RR43196
Average Customer Rating: 4.9 out of 5 stars (53 Customer Reviews)
Adjustable bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform. Folding design, with 180 degrees of rotation, provides extra clearance for city driving. Includes installation hardware.by: Alexander01/25/2022
Best antenna mounting solution out there. Works perfectly with Thule wing bar evo crossbars. The antenna kit comes with an assortment of mounting plates and fasteners so you could configure what works best for your situation. Build quality is top notch, mounting it into the crossbar channels make it very secure/ anti theft and the adjustable angles make for getting into spaces with lower clearance. Definitely recommend this one.
by: Don B07/11/2021
Ordered this to attach weBoost Reach OTR to my Prinsu rack on my 2012 Tacoma. IT WORKS PERFECTLY!!!. It is well made with thick metal and easy to use. Hardware was complete and clear instructions. Every part lines up as it should. Rare these days.
Just used standard 1/4” x 1-1/4” carriage bolts and 10 minutes to install. Bolts provided will not fit my rack but a quick mod is all that is needed. (Made for a Rhino-Rack)
I was after the fold down feature of the bracket so that it was out of the way when not needed and the multiple adjustment points was a plus. Lockdown has some movement so I bought a 3” Quick Fist to stop any rattle while driving.
Approximately 100 miles of driving and no issues so far. Great job Rbino-Rack and great job to etrailer for having it in stock!
by: Wilson P03/26/2024
We found this to be the best way to install whip lights on our Rhino-Racks
by: Wade07/06/2023
It’s decent quality and fits the Rhino-Rack systems, but it’s way overpriced! The folding antenna does exactly what you’d expect. It’s made of heavy gauge steel, parts have a pretty good finish, albeit there is some lite surface rust on some of the stainless steel hardware. Ultimately it works as intended with Rhino-Rack systems, but the cost is ridiculous. A year later and I still have a bit of buyers remorse. I would have loved to find a more affordable alternative that wasn’t some low quality piece of junk. I was traveling for work and didn’t have access to my shop and tools when I made the purchase. If I had been at home I’d have built my own solution for a fraction of the price.
by: Angel 08/13/2023
First Let me just say this product is built very well and the quality is awesome , this is my second one the first was too install my cell phone weBoost OTR antenna on my overland trucks roof rackand and my second one was to mount my Midland GMRS MXAT04 47" antenna on my front bumper and they function great. Thank you for providing a great product and shipping it in a timmly matter.
by: Ken07/03/2022
Worked perfectly on our roof rack for our cell antenna booster. Now I can easily fold down the antenna to enter our garage! While I had planned to use my own hardware, the 2-hole M6 plate worked well in the channel by filling a slight bevel on the corners. I liked that better and went with that instead.
by: Ryan 06/29/2023
Does exactly what it says. The mount feels solid, and it's easy to adjust. My only complaint is the locking screw has rusted and is tough to turn.
by: Oogsmobile07/23/2019
Purchased for a Wilson 4G antenna on top of our camper so we could lower the antenna when not in use due to the already tall vehicle. Works great no issues after a year of use. It's very stout and has held up well. Recommend a little anti seize on the stainless wing nut to keep it lubed.
by: VanTastic07/03/2022
It took 6-months to get this product. Excellent build quality, very sturdy and fairly flexible mounting options (uses M-6 bolts). I'm using it to mount my WeBoost Antenna on my Van. etrailer did a good job keeping me informed about the delays.
I didn't give it 5-stars because I would have liked M8 sized holes so I had to use a step bit and repaint :(
by: David 07/11/2021
Nice used it for mounting a weboost antenna. Love the way it angles. Great mount
David
7/12/2022
Great still using it. No problems with it and in fact just purchased another one for my other truck. I would like to see the keeper screw a little different. I like to keep it in. But if I need to go to car wash I have to unscrew it and hope I dont it. That is the only issue I see. Maybe switch that to a pin or something.
by: Michael 05/01/2023
Will use this for my WeBoost cell antenna on my F250 mobile RV Technician work truck.
by: Keith W02/21/2020
Excellent solution when you need a fold down antenna mount. Mounted this one on top of my roof rack which allows me to get into the garage without banging up my rooftop antenna.
Keith W.
2/22/2021
After a year, the mount is still looking and working great! Would highly recommend it if you need a solution where your antenna needs to be folded down. I use mine with a GMRS antenna without any issues
by: Sam 07/06/2022
Bigger than expected but works perfect. Im going to cut the wing nut down only because its fine thread and sticks inside a 1/2” and will still work cutting it shorter.
by: Chuck10/17/2022
It works great. Numerous mounting options (with hardware included!) The only very small rub is the thumbscrew hole needs tapping after paint. It is a little pricey but rock solid build.
by: Christian11/24/2021
Thanks for your patience.
Please find attached a photo I'm finally happy with (as a photographer) of my F150 with the Thule TracRac SR I purchased from you back in November.
It is just simply the best. I'm very pleased with the rack, how solid it is, how versatile it is, as both components can be moved front and back at will or even removed completely. Well worth the money!
by: Greg 12/20/2021
Very well built and nicely finished. I mounted it to a Prinsu roof rack on my 4Runner. I drilled a few extra holes to mount to the Prinsu, but it was easy and worth it to gain the ability to fold my CB antenna when we aren't out on the trails.
by: Rick D12/24/2021
great antenna mount heavy enought to even run a self tunning HF antenna, mounted perfectly to my Yakima jetstream bars with included hardware
by: Derek 05/15/2021
Exactly what I needed to be able to drop my weboosf antenna down for clearance. Packaged well. Really nice that a variety of hardware is included for different install scenarios.
by: James 05/17/2021
Product is built so well it sold out. etrailer's Customer Support is so Excellent they provided me with updates on my order every step.
by: Benjamin06/24/2022
Great product for cell phone booster !
by: Justin 11/30/2021
exactly what I was looking for to mount my weboost drive antenna to the roof of my van and be able to lay it down since I use a longer mast.
by: Sam 12/16/2022
Very nice looking product, well built and powder coated looks like it will last longer than my jeep. Thank you for the quality product.
by: Robert 06/30/2021
Took a bit of configuring but was able to adapt the braxket to my rack and WE BOOST system.
by: Phil 05/24/2021
This bracket is built like a tank. Nothing cheap about it. Buying from etrailer was easy and Justin was great to work with..
by: Jonathon 07/01/2022
A little pricy for a piece of metal but it works exactly how I wanted it to. Owned it over a year now, no problems.
25
54
Show More Reviews
See what our Experts say about this Rhino Rack Accessories and Parts
- Will The Rhino Rack Antenna Mounting Bracket Fit A Summit Rack On A Winnebago Travato Yes, the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 will fit on your Summit Rack on your Winnebago Travato. These mounting brackets will mount onto Rhino-Rack Pioneer platforms, most crossbars with top channels, a mounting hole diameter of 13-mm, and has a post hole diameter 17-mm. Attached is a product overview video for you to check out as well.
view full answer... - Availability of Clamp To Secure Antenna End With Antenna Mounting Bracket for Rhino-RackI sure can identify it. In addition to the Antenna Mounting Bracket # RR43196 he is using the Quick Fist 3" Clamp # QF50050. This mounts with a 1/4" bolt or screw and washer so it isn't specifically designed to fit the rack. I'm guessing he drilled into his rack to mount it.
view full answer... - Will the Rhino Rack Antenna Mounting Bracket Fit in Yakima T-SlotsT-Bolt channels on crossbars are typically all roughly the same size, so the mounting hardware that comes with the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 can also be used in Yakima T-slot channels. You won't need the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184, but they would also work for this application if the hardware was not included. When it comes to the dimensions, I've listed those below but...
view full answer...
- Track Mounted Antenna Mounting Bracket Compatibility With Frontrunner Slimline II Roof PlatformThe Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 is compatible with the Frontrunner Slimline II Roof Platform. The base that fits in the channel may need to be added before the platform is assembled on one side as the hole doesn't appear large enough to drop in.
view full answer... - Will The Antenna Mounting Bracket RR43196 Work With RSI Smartcap Load Bars?Hello Mark. The Antenna Mounting Bracket # RR43196 is a channel mount. It will work with the Rhino Rack crossbars, and virtually any other crossbar that has a top channel. We do not sell the RSI Smartcap load bars here, so I do not have a much specific technical information on them. Based on what I can read and see online the RSI bars do have a standard top channel. What I do know is that the Rhino Rack crossbars have a 13/16" wide x 1/4" tall T-channel. So, as long as the channel on your...
view full answer... - Is Rhino-Rack Pioneer Platform Rack Compatible with Factory Crossbars on 2020 Toyota RAV4Most crossbars (both factory and aftermarket) have a slight bow at the center. This is completely normal. The Rhino-Rack Universal Pioneer Platform Rack # RR42115BF is compatible with round, square, aero, elliptical, and most factory crossbars. The platform itself does not sit directly on the top of your crossbars. There top mounting brackets sit between the top of your crossbar and the bottom of the Pioneer platform. So, by the time you tighten the top and bottom mounting brackets, the...
view full answer...
- What Size is the Mounting Hole on the Rhino Rack RR43196?The antenna mounting hole on the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 will be 17mm, or just about 11/16". With that being said, the 3/8" diameter would work, but the 3/4" one would require modification in order to work.
view full answer... - What Does Rhino-Rack Antenna Mounting Bracket RR43196 Mount OnThe Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 will not be able to mount to tracks like the Yakima ones you mentioned. The Antenna Mounting Bracket will mount to crossbar (or platform) channels but not tracks, because they have different channel dimensions. So what you would need instead to mount the Antenna Mounting Bracket # RR43196 are crossbars with top channels like the Yakima JetStream Crossbars # Y00425. I have added a link...
view full answer... - Will the Antenna Mounting Bracket for Rhino-Rack Crossbars Fit the Toyota Deck Rail System?Yes, it will! The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms item # RR43196 will fit the deck rail system on your 2011 Toyota Tacoma. It includes a couple of M6 channel nuts which measure 1-3/8" long x 5/8" wide.
view full answer... - Can Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms Fit Retrax XR RailsThe Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 have 2 different T-Bolt plates that can be used. The longer one is too long but the shorter ones measure about 1-3/8" long x 5/8" wide. Width-wise the plates will fit but they might be thicker than what the Retrax XR rail is compatible with so in that case you can use the Quick Mount Nuts # RRQMFK11 which are compatible with the M6 bolts that come with the antenna mounting kit.
view full answer... - Parts Needed to Install Rhino Rack Antenna Mount to Roof of 2019 Jeep Cherokee with E-Group RailsThe Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 that you mentioned can be used on the roof of your 2019 Grand Cherokee that has the E-Group roof rails but you do have to install a set of crossbars on the roof for the holder to attach to as it cannot mount directly to your flush rails. So for that you'd need the Rhino Rack roof rack # RRVA126B-2, # RRRCL4, and # RRRCP27-BK and you'd be set. I attached an install video for this rack on a similar Cherokee with...
view full answer... - Does Antenna Mounting Bracket # RR43196 Fit Retrax XR and Yakima Lock N LoadThe Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 does fit the channels of a Retrax XR tonneau and a Yakima Lock N Load platform like # Y05044-39. No other hardware is needed.
view full answer... - Can Rhino Rack Antenna Mounting Bracket Fit FrontRunner Slimline II and WeBoost AntennaYes the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 will fit in the channels of your Frontrunnter Slimline II rack as well as fit the base of a WeBoost antenna.
view full answer... - Will the Antenna Mounting Bracket # RR43196 Fit Thule Crossbars? Yes, the Antenna Mounting Bracket # RR43196 will fit Thule crossbars which have a top channel for mounting roof rack accessories.
view full answer... - Can The Rhino-Rack Antenna Mount Be Mounted To 80/20 Extruded Aluminum CrossbarsYes, the Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 can mount into the t-slot channel of an 80/20 extruded aluminum crossbar. Depending on the profile/size of the channel you may have to trim down the included mounting brackets a tiny bit or get some new ones from your local hardware store to fit. I've attached a customer submitted photo below showing where they mounted it into this style railing.
view full answer...
- Will Rhino-Rack Antenna Mounting Bracket Fit Thule Crossbar ChannelsYes it will! The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding # RR43196 will fit the channels of your Thule AeroBlade crossbars perfectly. I've added a link to the written instructions of this bracket for you to take a look at as well.
view full answer... - Compatibility of Rhino Rack Antenna Mount with Jeep E Group PackageThe Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP27-BK is a confirmed fit for your 2012 Jeep Grand Cherokee with E Group package. This is designed to fit Rhino-Rack RCL Legs # RRRCL4 or half set # RRRCL2. and then use # RRVA126B-2 or # RRVA126B. The Antenna Mounting Bracket # RR43196 is intended for use on the channel of the crossbars or platforms but could be mounted to one of the RCL legs with some basic hardware adjustments. It...
view full answer... - Will A Poynting OMNI Antenna Fit The Rhino-Racks Antenna Mounting Bracket RR43196?The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount # RR43196 has a post hole diameter of 17mm. I am not able to verify if the Poynting OMNI Antenna will fit or not, but it looks like it will, just make sure it does not have a diameter greater than 17mm. I can, however, verify that this Rhino-Racks bracket will fit your Thule Aeroblade bars.
view full answer... - Will the Rhino-Rack Antenna Mounting Bracket Fit with a Thule TracRac SRI am happy to inform you that the Rhino-Rack Antenna Mounting Bracket, part # RR43196, will fit in the T-track of the Thule TracRac SR, part # TH43002XT-781. I've linked to the installation instructions below.
view full answer... - Does The Rhino-Rack Antenna Mounting Bracket Fit On The Thule WingBar Evo CrossbarsYes, the Antenna Mounting Bracket for Rhino Rack-Crossbars and Platforms # RR43196 will fit into the channels of the Thule WingBar Evo Crossbars # TH711200. This antenna mounting bracket is meant to fit most crossbars with top channels, along with Rhino-Rack Pioneer platforms.
view full answer...
Do you have a question about this Accessories and Part?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Noah M
Edited by:
Daron K
Written by:
Jeanne D
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Oogsmobile
7/23/2020
After another year of using this antenna mount, its still working great. The powder coating has held up well and other than spraying it a couple times Fluid Film to keep it lubricated, there is very little rust on the mount which is expected considering the salty conditions its exposed to. I would definitely buy this again and have recommended it to a couple frients.