Spindle Nut Kit for EZ Lube Axles
(186 reviews)
Price: $21.94
Spindle Nut Kit for EZ Lube Axles
Item # RG05-100
Retail:$36.39
Our Price: $21.94
You Save: 40%
In-stock alternatives that can ship today
- All Info
- Reviews (186)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - RG05-100
- Trailer Spindles
- Spindle Nut
- Redline
- 1 Inch I.D.
Replace the spindle nut and retaining washer on your EZ-Lube axle with 1" spindle with 14 threads per inch pitch. Includes 2 spindle nuts and retaining washers.
Features:
- Replace the spindle nuts and retaining washer on your EZ-Lube axle
- For 1" spindles with 14 threads per inch thread pitch
- Includes 2 spindle nuts and 2 retaining washers
RG05-100 Spindle Nut Kit for EZ Lube Axles
Alternate part number: K71-622-0
Video of Spindle Nut Kit for EZ Lube Axles
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Spindles RG05-100 Review
Speaker 1: Today we're gonna take a look at the spindle nut kit for E-Z Lube Axles. Now, this part will replace the spindle nut, the D washer, and the nut retainer on your E-Z Lube Axles with this complete kit. This is designed for one inch spindles that have 14 threads per inch thread pitch. This kit is designed for E-Z Lube Axles, because an E-Z Lube Axle does not allow the use of a Cotter pin to retain the nut on the spindle. It has to use the nut retainer to work on an E-Z Lube Axle. This part will include everything shown here, the two spindle nuts, the two D washers, and the two nut retainers.
So, when you go to install these on the spindle you'll first put your D washer on, then you'll screw your nut on, and then clamp on your nut retainer to hold it into place. That should do it for the review on the spindle nut kit for the E-Z Lube Axles.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Spindle Nut Kit for EZ Lube Axles - RG05-100
Average Customer Rating: 4.8 out of 5 stars (186 Customer Reviews)
Replace the spindle nut and retaining washer on your EZ-Lube axle with 1" spindle with 14 threads per inch pitch. Includes 2 spindle nuts and retaining washers.by: Rick03/14/2024
I probably could have reused the original parts and saved some money, but it is great to have totally new Hub Assys (and retention fasteners) on my trailer.
by: Kevin 04/15/2024
Exactly what I needed. These are hard to find.
by: Joseph 04/04/2024
worked great
by: Longcreek Monty from Arkansas11/20/2023
A special shout out to SHAWNEE! Thank you so much for helping with this order and getting it in the mail on time.
by: Donna02/18/2019
As an unskilled person looking for parts for our trailer, we could not find them locally or even online, I called etrailer and spoke with Jesse M. He was extremely professional, courteous and knowledgeable. He was able to locate the parts I described almost immediately and took my order for the parts and they were exactly what we needed. I would highly recommend etrailer and especially Jesse M. to anyone needing trailer parts.
Thank you, Donna
by: Todd 03/04/2023
Installed with a new bearing set to replace the old ones. For the few extra dollars more than just the retainers cost you can get the whole kit.
by: William 09/01/2023
AAAAA+++++
by: George11/19/2018
I am in the process of inspecting and repacking the wheel bearings on a pair of Dexter 7K easylube axles. I bought a set of these to have as spares for the project. I received the Dexter axle washer, nut and retainer in a timely manner. The nut and retainer are nearly indistinguishable (to me) from the original Dexter parts. The Washer ID and thickness is the same as the original Dexter part, but the OD is slightly smaller but that doesn't appear to be a problem to me.
by: Charles 09/29/2022
The replacement parts I needed at a price I could appreciate. Thanks etrailer.com
by: GaryH - JAX03/01/2017
Called on a Monday morning to inquire if items I needed were in stock. Sales agent very helpful and polite, offered to take order then for quicker processing. Placed order for 2 new trailer tires w/rims and tang washer kit (hard to find) for my older trailer which doesn't have the cotter pin setup.
Standard delivery was free with my order, and I upgraded to 3-5 day express for a few bucks more to insure I could install by weekend.
All parts arrived in Jacksonville FL on Thursday afternoon, so I could install on the weekend. Tracked shipment all along the way.
All in all, products were as expected and very reasonably priced, service was great, delivery was on time.
Will use eTrailer again!
Gary
JAX FL
by: Mike N10/02/2018
I was servicing the bearings on my RV trailer and damaged one of the locking plates. I was unable to find this style lock nut and plate anywhere locally. I tried parts stores, RV dealerships and another source that deals in specialized automotive and trailer repairs. I had to settle for the castle nut with the bend in tab. I should have done a goggle search but I need to get on the road. A quick search and there is the item I need. Great Price and now I have a couple of spares for the next time I service the bearings.
by: Noah01/20/2020
I've have been rebuilding a flat bed trailer, that I use for hauling rat rods and potential rat rods, and everything I have ordered from etrailer has been great. Fast shipping, excellent job on keeping me updated on tracking information. They also have great videos on how to information. Very pleased with this company, and how they operate. When I need something for my trailer, I don't look anywhere else, I just go straight to these guys, and know they will have just what I need. Thank you very much!!!!
by: Greg T10/10/2018
No pictures because all you would see is a nut, retainer and a ball of grease.
In short, I couldn’t find what I needed (the retaining ring) anywhere locally. The internet and etrailer came to the rescue! Everything fit perfectly and my trailer is functional again.
The order was shipped promptly and, if needed, I will go to the etrailer sight first next time!!
by: Paul04/13/2017
Replaced brakes and drums on 3.5K Dexter EZ lube axles. The parts were exact change-out. Quality is as good or better than the originals.
by: Scott H.08/23/2015
I am very pleased with the speed of the delivery and the exact replacement parts I needed. They are a perfect fit for my 10 year old boat trailer.
The ease of finding parts on the website that I needed to repair my hubs was extremely important to me as we are still very active with our boat . Without the parts we were stuck on dry land. Not a good way to end the year. But etrailer.com came to the rescue and we were back on the water.
Thank you for all your help....
by: Robert M06/15/2017
Perfect fit for my trailer to replace a castle nut and retaining washer that was gacked on one side. No issues installing, so far so good! Overall looked like quality pieces that give you peace of mind towing. The old retaining washer got messed up by the previous owner or whoever serviced the axles last and was actually allowing the castle nut to back off the axle. This new piece looks much more secure than the old style.
by: fredb10/17/2016
These were exactly what i needed. Price was good and it is a much better locking system then the ones that were on the axle to start with. I am a fan of a cotter pin and not the flat spot on the axle but you have to work with what you have. I love these guys the few times I have dealt with them is excellent.
by: Steve08/20/2018
Never used this type of spindle nut lock ring. Thought it went under nut it doesn't. so messed the first one up. Would be nice if there was a pic or info. on package for assy. (but really my bad). nothing on product or company. Worked awesome after I got stupid out of the way.
by: Tom03/30/2015
This is the first time I have done business with e-trailer and let me say that their service and support is top notch. The actual human on the phone was most knowledgeable and knew exactly how to help me. All the parts I ordered arrived on time and were the exact ones I needed. After dealing with e-trailer, and experiencing their service, support, shipping and prices, there is no need to look anywhere else.
by: Walt08/08/2019
Received parts yesterday and everything arrived in excellent condition. Without etrailer's helpful guides it would have taken a lot longer to identify the correct Hub's and bearing's that I needed for my jet ski trailer. I always go to etrailer for my trailer needs!!!! I have a jet ski trailer, boat trailer, and 36.5 foot 5th wheel camper. So I'm always needing parts!!!
by: Texx Hauling01/20/2017
This new design for the spindle lock nuts is far superior to the previous nuts that used a washer with a tab to lock the nut. I lost a wheel with a new tire I suspect due to the tab breaking off. I recommend this product to everyone who has the old design spindle nut.
by: Edward S05/31/2020
The service is excellent, parts came on time and as described and best of all the job got finished (etrailer.com) saved the day.
by: Jonathan Cobb07/20/2016
My trailer has the older design with the castle nut and flange washer. I bought these to keep as spares with my extra hub. However when the time comes to service my bearings again I will go with this style because I can tell these will be much easier to use than trying to bend a flange into the ridge of the castle nut.
by: James09/07/2019
This setup is much more dependable than the castle nut with a locking washer. The cage around the spindle nut is locked in on the flat portion and then grabs the nut not allowing it to move. My axle doesn’t have a hole through it for a cotter pin, so this is my best option.
by: Brent B04/29/2019
Clips nuts and washers did the trick on my Scamp 14. It's a bit tricky finding this style of retaining clip needed for the scamp axle. Thanks again Etrailer
25
186
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Recommended 1" Diameter Spindle Nut Kit Yes, there should be a washer, nut, and keeper. To reattach your hub to your AL-KO axle you will want the Spindle Nut Kit for EZ Lube Axles item # RG05-100. This kit will work with a spindle that has a 1" diameter and a 14 thread per inch thread pitch. If this is not what you have, measure your spindle and email me back and I will try to find you the correct spindle nut kit.
view full answer... - Tongue Washer Compatibility with Trailer Spindle and Tapered BearingsThe Tang Replacement Spindle Washer # 5-71 or the Washer Spindle Tongue # 165863 will fit into the groove of your spindle to keep the washer and nut from rotating. This gives you a similar outcome to the tang style washer that uses the cotter pin to hold it, but the idea is the stabilization of that washer that will keep slight pressure on the flat side of the tapered bearing to hold it in place. This is one style similar to a D style washer as well like Spindle Nut Kit for EZ Lube Axles...
view full answer... - Will Spindle Nut Kit for Dexter Standard and EZ Lube Axles fit 1997 Timber Wolf Cargo TrailerI was unable to find any specific information about your trailer to know anything about the axles that came on the trailer. It is likely that the Spindle Nut Kit for Dexter Standard and EZ Lube Axles # RG05-100 will fit your axle, but you will want to make sure that the threaded part of the existing spindle has a diameter of 1 inch.
view full answer... - Replacement Washer and Nut for EZ Lube Spindle on Escort Boat TrailerThe Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101 is the correct fit for your trailer spindle based on the picture and measurement if you want to use a castle nut like # 165686. The alternative option is the Spindle Nut Kit for EZ Lube Axles # RG05-100 which uses a different style retainer for the nut. Either options will work well for you. You may also want the zerk fitting # GZERK to replace the fitting on your spindle which is a confirmed fit since Dexter uses the standard...
view full answer...
- Can Retaining Nut of Spindle Nut be ReusedThe retaining nuts like what comes with the part # RG05-100 that you referenced can be reused.
view full answer... - Compatibility of the Redline Nut Retainer for the Redine 1 Inch NutThe Replacement Nut Retainer Jam Nut, # 6-190, is designed to fit the 1 inch Trailer spindle nut that fits the 2,000 lbs to 8,000 lbs axles with E-Z Lube spindles. The kit you referenced, # RG05-100, will include the same # 6-190 jam nut retainer and # 6-191 jam nut. The actual thread size on the spindle is 1 inch. The jam nut and the retainer measure 1 inch to fit the 1 inch threads on the spindle.
view full answer... - How To Determine The Correct Bearings, Races, Seals, For A 2007 Rolls Rite 24K TrailerTo determine the correct bearings, races, and seals for your 2007 Rolls Rite 24K trailer you will need to remove the wheel and hub from your trailer and use the part numbers off of the bearings, races, and seals that you have. There is not a listing for bearings on a particular trailer, because the trailer manufacturers are always changing brands of axles on the same trailers, which could use different size bearings, races, and seals. The washer and nut will depend on what size and type...
view full answer... - Spindle Nut Kit Recommendation for a Dexter 6k AxleSince the D60 Dexter Axle uses a cotter pin and castle nut the # RG05-100 would not be the correct kit for you. For that I would recommend the Trailer Spindle Nut # 165686. For a compatible cotter pin I would recommend the Cotter Pin part # 165649. People use channel locks typically for installation and removal of these castle nuts since they don't really get torqued down and the length of the spindle prevents most standard sockets from being easily used.
view full answer... - Correct EZ Lube Spindle nut and Washer Kit for my TrailerNot having a cotter pin is not acceptable but because it is an EZ-Lube hub it should use the Spindle Nut Kit for EZ Lube Axles part # RG05-100. This has the tang retaining washer to keep the nut from backing off. As far as the grease zerk they are threaded. If yours are broken off you will need to drill them out carefully and tap the hole to match a grease zerk you want to use these are readily available at any parts store or you can use part # Gzerk.
view full answer... - Picking Out Grease Caps for Trailer The Spindle Nut Kit for EZ Lube Axles # RG05-100 is most likely what you need as this is a pretty standard spindle nut kit that fits the standard 1 inch diameter threads of a spindle. Now picking out a grease cap will be a bit more involved as there is a bit more variety in fits here. What I would recommend is using a caliper like # PTW80157 to verify exactly what size you need by measuring the bore where the cap installs and then check out the link I attached below to see all the caps...
view full answer... - Available Sizes of Spindle Nuts and Nut/Washer KitsThe smallest spindle nut/washer kits we carry are for 1-inch spindles like # TRU94FR which are typically found on 2000-lb axles. We do offer a 7/8-inch inner diameter spindle nut # 165931 by itself but nothing for a 3/4-inch spindle as might be found on a small import trailer.
view full answer... - Spindle Nut Recommendation for a 3,500 lb AxleSince you have a 3,500 lb axle most likely the diameter of the threaded portion of the spindle is 1 inch. You will need to verify that. And since the spindle has a hole in it for a cotter pin you would need a castle nut. For that I would recommend the Trailer Spindle Nut # 165686. For a compatible cotter pin I would recommend the Cotter Pin part # 165649. The Spindle Nut Kit # RG05-100 that you referenced is for a different style spindle so I would not recommend it for you.
view full answer... - Dexter EZ Lube Bearing Kit Recommendation for 3500 lb EZ Lube Spindle that Includes Nut RetainersThe most cost effective way to get the nut retainers is to get the part # BK2-100 and then instead of using the cotter pins use the part # RG05-100 instead. The kit for your hub isn't available and by the time you piece all of the components together it's more cost effective to just get the kit.
view full answer... - Recommended Spindle Nut and Washer To Use With Bearing Kit for #84 SpindlesIf you have Dexter EZ-Lube Axles, the Spindle Nut Kit for EZ Lube Axles part # RG05-100 is what you need most likely. Otherwise, the Trailer Spindle Nut 1" part # 165686 along with the Cotter Pin part # 165649 is likely all you need. The Bearing Kit for #84 Spindles part # BK2-100 does come with a tang washer already.
view full answer... - Does the Dexter Trailer Hub/Drum Assembly for 3,500-lb E-Z Lube Axles Come with Axle Nut and WasherThe Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ comes with the nut and retainer clip or you can purchase the Spindle Nut Kit for EZ Lube Axles part # RG05-100 which comes with the nut, retainer clip, and d-ring washer. You can reuse the old washer.
view full answer... - Install Video for Trailer Spindle Castle Nut I believe I found the video you are referring to and have attached it below. You will want to fast forward to the 4:45 mark to see the spindle castle nut procedure. As you mentioned you will basically just want to tighten the nut until it stops by itself. You don't want to actually torque it down to any specific spec. I have attached a link that will also take you to our available selection of spindle castle nuts that you can look through if needed.
view full answer... - Nut Size Used on Dexter 3500 lb Hub and Drum AssemblyThe Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized # 8-247-50UC3-EZ uses 1/2 inch studs so the lug nuts will be 1/2 inch inner diameter and 13/16 inch outer diameter like # CE11051. If instead you are looking for the spindle nut # 165686 is the correct fit along with cotter pin # 165649. The Spindle Nut Kit for EZ Lube Axles # RG05-100 is what you want if you have the D-shaped spindle. These have a 1-7/16 inch outer diameter and a 1 inch...
view full answer... - Replacement Hub and Drum Assembly for Tandem Axle Car HaulerThanks for your pictures. They were extremely helpful! What you will want for your 1996 Wilson tilt trailer is the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2, # AKHD-545-35-EZ-K. This will give you all new bearings, races, and grease seal along with the grease hub. For a 5 on 5 bolt pattern, you will want the # AKHD-550-35-K. You may want a bearing packer like # L70025 and some grease like # L54FR and a compatible grease gun like the # 30-800....
view full answer...
- Replacement Grease Seal and Bearing Kit For a 2020 Grand Design Solitude 375RES With 7,000LB AxlesYour Dexter axle on your 2020 Grand Design Solitude does use the Grease Seal # GS-2250DL. This seal is also found in our Bearing Kit # BK3-200 which I do recommend keeping on hand incase you have an issue while on the road. The kit contains the Seal # GS-2250DL, Inner Bearing # 25580, Inner Race # 25520, Outer Bearing # 14125A, and Outer Race # 14276. We also have the Spindle Nut Kit # RG05-100 in the event the nut, washer and retainer are somehow damaged. The Seal Puller # PTW1219 and...
view full answer... - Washer Needed to Install Dexter Trailer Idler Hub Assembly for 2,000-lb AxlesIf the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-91-05UC1 is what fits your axle/spindle then you can use the Spindle Nut Kit for EZ Lube Axles # RG05-100 for an EZ Lube spindle or parts # SW1000, # 6-190, and # 165686 for a standard spindle.
view full answer... - Can You Convert an EZ Lube Spindle To The Dexter Style Retainer System K71-622-0?Yes, you can switch from using a Tang Washer # 5-101 to the Spindle Nut Kit # RG05-100. This kit includes 2 Retainers # 6-190, 2 Nuts # 6-191 and 2 D-Washers # 5-23.
view full answer... - Can Spindle Nut Be Reused When Installing Bearing Kit for #84 SpindleYes, if the retainer nut is in good shape you can use all of the other components of the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100 and not worry about the tang washer and cotter pin. If the spindle nut isn't in good shape then you can replace those parts as well with the Spindle Nut Kit for EZ Lube Axles # RG05-100. Attached is an installation video of the bearing kit and a review video of the spindle nut kit for you to check out.
view full answer... - D Washer Replacement Needed for a SpindleIt sounds like the washer you are looking for is like part # 5-23 which I have added a photo with specs for you to reference. This type of washer is held in place with a spindle washer like part # 5-101. Are you looking for a replacement bearing as well? If you could let me know what the bearing number is, like the the popular # L44649, then I can help you out with getting a replacement.
view full answer...
- Kit that Includes Spindle Nut, D-Washer and Retaining Nut for EZ Lube SpindleSounds like you are looking for the # RG05-100 which is a D-washer, spindle nut, and retaining washer kit for EZ lube spindles like what you have.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.