Rack'Em Single Hook Rack for Enclosed Trailers
(27 reviews)
Price: $33.42
In Stock
Rack'Em Single Hook Rack for Enclosed Trailers
Item # RA-8
Retail:$67.47
Our Price: $33.42
You Save: 50%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
RackEm Hose Hanger - RA-8
- RackEm
- J-Hook
- Pre-Drilled Holes
- Fixed
Enclosed Trailer equipment racks feature a hook design at the top of the rack that allows them to hang from the metal frame runner at the top of the side walls on the trailer for added strength. They are predrilled so that they may be screwed securely to the wall. The unique and durable "Hammered" paint finish will last for many years.
- Holds spare belts, hoses, and more
RA-8 Single Hook Rack for Enclosed Trailers
Video of Rack'Em Single Hook Rack for Enclosed Trailers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Rackem Single Hook Rack Review
Today on our enclosed trailer, we're going to be installing the Rack 'Em single-hook rack for enclosed trailers, part number RA-8. You'll see here on our particular enclosed trailer, the wires run right across the top lip, where the single-hook rack would actually hang, so we've gone ahead and purchased a 2 x 6 x 8 board. We put an angle cut on the back side of it, where the hook will rest against it, as you can see here by our small demonstration piece. By doing this, it will allow you to move the hook the full length of the 2 x 6 x 8, as well as not damaging any of the wires that rest across the top lip of our trailer. Now we're ready to install our 2 x 6 x 8. We'll take our level first and get a nice straight line so that we put our board level. To do this, we use some wood screws, as well as a couple metal screws to tie into the framing of the trailer.
We also want to make sure that we scoot the board down far enough that we could take the hooks off and relocate them along the board if we so choose. Now that we have our board mounted up into place, now all we got left to do is set the single-hook rack on top of the board and put a screw in the hole in the location that we choose. As you can see, you can buy multiple single-hook racks, which will allow you to hang a variety of different items on the wall of your trailer. That will conclude our installation of the Rack 'Em single-hook rack for enclosed trailers, part number RA-8. .
Customer Reviews
Rack'Em Single Hook Rack for Enclosed Trailers - RA-8
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
by: Creig04/14/2016
Very sturdy, heavy duty, hangs my 100' electrical cords easily
by: Excellent04/11/2016
Great product and fast shipping. Thanks and keep making great products
by: Great product 09/29/2016
I am very pleased with my rackem hooks, I have five hooks in my little enclosed trailer that I hold my kayaks in these hooks hope one of my 10 1/2 foot kayaks other folks hold my paddle case ,chairs and a small table they work wonderful I highly recommend them
by: Branden C.04/21/2014
Great product! It's the only hook system I've ever used in my cargo trailer that actually keeps things on the wall while in transit. They are also very strong and durable.
by: Roland C02/22/2017
Rather pricey but worth every penny. The best hook for my enclosed UTV trailer
for hanging the spare tires & other off road equipment.....
by: Matt 03/17/2023
Easy install
by: Ryan03/26/2020
Very glad I purchased a few of these. They are durable and hold many different items. Great addition to trailer. Also etrailer very easy to work with
by: Lawrence09/26/2014
Very useful for hanging hoses and cords in our enclosed trailers. Great customer service.
by: Joe H.01/12/2015
Another great product and fast delivery!!! Cant wait to hang it and use it in my enclosed trailer!!!
by: Jon09/08/2013
Great for hanging blowers on the wall of an enclosed trailer!
by: Eddie H09/16/2014
Use it to hold heavy pressure washer hose, works great!
by: Larry 09/22/2023
by: DaveMich09/25/2020
Rack’Em Single HOOK
A Thumbs Up !!
by: Vlad 03/15/2024
by: RPM710/07/2016
Product works great! Excellent support system if needed.
by: Josh10/31/2014
Great product. Will buy more in the fut ure.
by: Ricky 08/07/2020
Thanks we appreciate the quick delivery
by: Percy l10/04/2014
The best hook
by: thomas h08/07/2014
Works good
by: Kevin 07/14/2023
by: Shawn 04/24/2020
Thanks again
by: Donald 05/01/2020
Works well
by: John Roll08/19/2011
Works great. I'll keep you guys in mind for future projects. Thanks
by: Larry02/07/2015
Did the job
by: Richard 10/11/2021
25
27
Show More Reviews
See what our Experts say about this RackEm Hose Hanger
- Can the Rackem Single Hook Rack for Enclosed Trailers, # RA-8, Hold a 25 Pound Leaf BlowerThe single hook rack, # RA-8, does not have a specific capacity, but our contacts at Rackem have stated that it can handle the 25 pounds without issue. Make sure that whatever you attach the rack to can also support the weight you want to put on it. I have included a link to a video review for you.
view full answer... - Will Single Hook Rack For Enclosed Trailers Work On Open Utility TrailersThe Rackem Single Hook Rack, part # RA-8 is designed for enclosed trailers and are made so that they hook over the top of the wall. For added stability you can use the pre-drilled mounting holes to attach to the wall of a trailer. It may be difficult to find a mounting solution on an open trailer that would keep this very stable and secure. I recommend the Pack'Em Trimmer Rack for Open Utility Trailers, part # PK-6. This is designed for open trailers and attaches to the lower rails. It...
view full answer... - Weight Capacity of Rack Em Single Hook Rack Part # RA8I spoke with one our our friends at RackEm, the manufacturer of the Single Hook Rack, part # RA-8. He told me that although there is no specific weight capacity listed, he is more than confident that the hook should have no problem handling the 60 or so pounds you describe. He told me that in the past for demonstration purposes, he has actually hung from the hook with no bending or breakage. If the hook can hold a man, your tent poles should not pose a challenge. You did not mention the...
view full answer...
- How to Mount Bicycles to an Enclosed Trailer WallThe Traffic Cone Holder, # RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for mounting your bikes to the trailer wall. However, I do have a couple of alternate solutions for you. First, you could use the Single Hook Racks for Enclosed Trailers, # RA-8. These sturdy hooks can hold well over 60 lbs., so they should easily support...
view full answer... - Solutions for Securing e-Bikes Inside Enclosed TrailerI really like the Rack'em Single Hook Rack # RA-8. These padded heavy-duty hooks aren't specifically designed for bikes but they will offer a higher weight capacity that should handle your bikes, especially when using 2 of them per bike to better distribute their weight and hold them evenly on the wall. They normally hook around the top lip of an enclosed trailer wall but you can also just use a 2" x 6" board if you want to hang them lower. With either of the above solutions you're still...
view full answer...
Do you have a question about this Hose Hanger?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Updated by:
Laura H
Updated by:
Erin H
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Creighton R.
4/14/2017
Very good. Sturdy, durable, well built.