Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. PC rated.
Features:
Specs:
The waterproof construction of this light kit makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens of each light are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this mini LED trailer identification light kit. Now this kit is gonna function as a front identification light for your trailers that are over 80 inches wide. These lights are PC rated, so they are gonna produce a 180-degree beam, so they can be seen from the front and from both sides. So they are gonna be DOT-compliant. Gonna be a great option for those of you who are wanting to add or replace some trailer identification lights on your trailer.
Now, these do have a recessed mount design. So they include the black grommet there to kind of cover up as they are sticking back through. So you are going to need a 3/4 inch diameter hole for each light because the lights are 3/4 inches in diameter by 7/8 of an inch deep. Your grommet diameter here is 11/16 of an inch. Each light is gonna have a durable polycarbonate housing and a clear polycarbonate lens over one amber LED.
That housing and lens unit are sonically sealed, so it is gonna be waterproof for you. So this is gonna be great for your trailers that do need to be submerged, like a boat trailer and that sort of thing. If you're not familiar with the benefits of LEDs, they are gonna be a great replacement over your older incandescent-style bulbs because they last about 50 times longer, because there's no brittle filament inside, like with your incandescent bulb, so it's not as easy to break them. These actually come with a lifetime warranty on the LEDs because they are so durable, but not only are they durable, they're also gonna be a lot more efficient. So they're gonna provide that nice, bright light with less power draw than your incandescent lights.
So these are actually only gonna draw about 0.022 amps on your 12 volt DC systems. So get plenty of light there with very little power draw at all. If I disconnect it from our power source here, we can talk about her overall length is right at 28 inches from where it's gonna be mounted on your trailer back to our two-wire connector here. So we're gonna have our ground and our lead wire to get connected to power. So 28 inches of space to work there to get this mounted in place.
So really a nice option if you are looking to add or replace a front indicator for your trailer. This is gonna do a great job for you. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (31 Customer Reviews)
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. PC rated.Used them for a different purpose, grille lights for a Ford Maverick! They worked great. Wonderful quality and service. Thanks!
Awsum Little lights have been using these lights for years on all my trucks and trailers never replaced any yet,Thanks etrailer
Item is as advertised—exactly what I ne eded.
it was all just as advertised.
The marker lights were a great replacem ent.
Everything I needed all in one place! Fast shipping.
I ordered several different trailer parts from etrailer and the service is good so I won’t order from anyone else. The product is always right
Excellent sales and knowledgeable empl oyees.
High quality and fast shipping. Customer service was a joy to work with.
These little guys are great! Easy to install, way bright, adds a little custom touch.
Great item that you have in stock packaged well arrived perfect.
Nice and bright super easy to install
Perfect fit good bright light easy to i nstall
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.