Nozzle Enclosure w/ Door and Frame Assembly for Lippert Waste Master Nozzle
(3 reviews)
Price: $214.68
In Stock
Nozzle Enclosure w/ Door and Frame Assembly for Lippert Waste Master Nozzle
Item # LC362881
Retail:$247.95
Our Price: $214.68
You Save: $33.27
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3)
- Q & A (0)
- Videos (1)
- Photos
Lippert RV Access Doors - LC362881
- Sewer Hose Hatch
- 12-7/8W x 7-7/8T Inch
- Lippert
- 10-3/4W x 5T Inch Cutout
- Rectangle
- 3-11/16 Inch Diameter Opening
Keep your Lippert Waste Master nozzle (sold separately) out of the elements. Locking enclosure mounts vertically or horizontally inside a compartment or underneath your RV. Spring latch props open small door so you can empty your RV holding tanks.
Features:
- Nozzle enclosure protects your Lippert Waste Master nozzle from the elements
- Storage pipe and end cap for housing a standard 20' hose (not included)
- Built-in wingnuts allow you to connect the small and large door to create one accessible opening
- Large door locks to secure both doors when not in use
- 1 Key is included
- Spring latch props open the small door when emptying your RV holding tanks
- Durable ABS plastic construction is UV resistant
- Easy installation - mounts horizontally or vertically inside a compartment or underneath your RV
- Mounting hardware not included
- White color
Specs:
- Overall dimensions: 12-7/8" wide x 7-7/8" tall x 10" deep
- Cutout dimensions: 10-3/4" wide x 5" tall x 9-1/2" deep
- Hose opening: 3-11/16" diameter
- 1-Year warranty
How to Properly Measure for Cut-Out Dimension
To get the correct cutout for your unit, you will need to measure the width, height, and depth behind your mounting surface.
362881 Nozzle Enclosure w/ Door and Frame Assembly for Lippert Waste Master Nozzle
Video of Nozzle Enclosure w/ Door and Frame Assembly for Lippert Waste Master Nozzle
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components RV Sewer - Hose Hatch - LC362881 Review
Speaker 1: Today we're going to be taking a look at the Lippert Component's nozzle enclosure with door and frame assembly. Now when you get this your door and frame do you have to be snapped onto the enclosure. You just put that in place. There is a little catch there to keep this smaller door open. So you to thread that through there. It's just sort of a little spring, pinch it together and it comes out the other side.Now you can attach that smaller door to the large door to keep everything locked.
There are two small wingnuts there on the underside of that small door that will attach it to the large one. So you just flip them over to the side and that will keep them together. Now with that larger door, it's going to be a little heavy so it won't keep them both elevated with that spring. And then you can lock it using the included key. It does come with two keys to get that secured.Now as far as the measurements for this unit, from the outside edge of our frame, from one side to the other, that's going to be 12-7/8 inch.
From top to bottom is going to be 7-7/8 inch, from edge to edge. And then the overall length, the frame itself from this thinner edge here, that's just going to be 1/2 inch, but the overall length of the entire unit is going to be 10 inches. Now as far as the cutout on the backside here, or the compartment on the back, it's going to be 10-3/4 inch from this edge to here. And then it's going to be five inches from this bottom edge to the top most ridge there.And again from the backside of the frame to the outer edge, that's going to be 9-1/2 inches. The opening at the back is going to be 3-11/16 inches from inside edge to inside edge at the diameter.
And that's going to do it for our look at the Lippert Component's nozzle enclosure with frame assembly.
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Manufacturer issue
Customer Reviews
Nozzle Enclosure w/ Door and Frame Assembly for Lippert Waste Master Nozzle - LC362881
Average Customer Rating: 3.3 out of 5 stars (3 Customer Reviews)
Keep your Lippert Waste Master nozzle (sold separately) out of the elements. Locking enclosure mounts vertically or horizontally inside a compartment or underneath your RV. Spring latch props open small door so you can empty your RV holding tanks.by: Newfound1505/07/2024
Good box, but way too expensive. I have never found pipe that fits from off the shelf every time I have installed these I have had to make an adapter from 4” pvc drain pipe I bought at Home Depot to make rest of the install.
by: Walter03/24/2022
Hi, I purchased this item to store my Lippert Wastemaster RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle - 20' Long. The nozzle is kind of big and bulky, plus I don't like storing the used hose in the storage compartment of my Little Guy Max. Got the item in a timely manner, great service from etrailer. Opened the box, there was no paperwork of any kind, no packing slip, no installation manual, just the enclosure, door, and bubble wrap. So I went to the web site page, [Lipper Waste Master RV Sewer hose], there was a video. Played the video, no useful information, just photos and a description. Did a google search, got an instruction manual [instructions manual link]. Better info, how big an opening to cut, how to attach the storage pipe, but nothing on how to attach the thing to the camper wall. There are no holes or marks on the flanges to indicate the location of fastenings, no mention of fastenings or adhesive of any kind. Now you might say "figure it out for yourself", but this thing is expensive (+-$xxx) and I don't want to mess it up. So I call etrailer, very nice lady but not much help. She does give me the phone # of the Lippert corporation. I call this number, go thru the system, get another nice guy who gives me a link to another installation manual. Turns out this is for another type of storage system , nice try but no help whatsoever . So. I guess it will be "Figure it out for yourself". You would think that for that price they would provide full installation instructions. Item looks great, and looks like it will do the job fine, but I am very disappointed at the support provided. That's why one star.
Walter B.
4/12/2022
I solved the problem by attaching the enclosure to a piece of 4 inch PVC pipe with an end cap, cut to fit inside my camper storage box. I can just take the whole thing out and use the hose, and return it to the storage box. No cutting needed.
Katrina B.
4/12/2022
I am glad that you have found a way to mount this enclosure without that bracket! Please let me know if there is anything else we can do to assist you.
by: Newfound1509/19/2020
It works great,but it costs to much for this nozzle enclosure.
What is it supposed connect to? I had to make my own connection to 4” pvc pipeline.
I LOVE the lippert rv sewer hose it’s the BEST. It’s so much better than any hose out there and WELL WORTH THE MONEY, it just works great no leaks or drips.
Newfound15
9/20/2021
It’s working out great, so glad I installed when I did. I’m still not feeling good about the price or the lack connecting pipe, but it came out fantastic. We would not be with out it.
by: Ronald 08/25/2022
Arrived on time and in great condition installation was easy no problem with it
4
4
See what our Experts say about this Lippert RV Access Doors
- How To Lock The Valterra RV Sewer Hose CarriersIt is a great idea to use the RV Sewer Hose Carrier for fishing poles. You can lock the Valterra RV Sewer Hose Carrier part # A04-5094BK with a padlock using the hole in the lid on the ends of the carrier. The hole measures a little less than 1/4". I recommend to use Master Lock Covered, Solid Body Padlock part # 131D to lock it. I took a look at your photo and we do not carry a gray water hose storage box that looks like yours. We do carry the Lippert Components Nozzle Enclosure with...
view full answer...
Info for this part was:
Installed by:
Kathleen M
Written by:
Mary K
Edited by:
Amanda M
Updated by:
Halie H
Updated by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
4/12/2022
I have some installation instructions linked below, in order to better assist. On pages 3-5 you will see a mounting bracket that you can clamp onto the frame under the trailer. This will be the best way to mount the enclosure. Now, We do not sell the mounting bracket that is mentioned in the OEM instructions aftermarket. Most trailers come with that bracket installed underneath the trailer itself, or they have a compartment for storage. If you do not have said bracket, you can reach out to the OEM of the coach in question.