Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards
(17 reviews)
Price: $197.99
In Stock
Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards
Our Price: $197.99
In Stock
Customers prefer these similar products
13% prefer this
10% prefer this
- All Info
- Reviews (17)
- Q & A (0)
- Photos
Inno Watersport Carriers
- Paddle Board
- Surfboard
- Roof Mount Carrier
- Aero Bars
- Elliptical Bars
- Factory Bars
- Round Bars
- Square Bars
- Saddle-Style
- Inno
- Clamp On
- No Load Assist
- Rear Loading
This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation.
Features:
- Carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof
- Easy to load with integrated straps
- Set boards on carrier
- Wrap long straps over the boards and connect them with hooks to wire looms on short straps
- Tighten straps down with built-in ratcheting knobs
- Rubber pads on base of carrier help to protect cargo during transport
- Adjustable pads and rubber coating on straps protect boards from scratches and scuffs
- Locking covers secure boards to carrier and carrier to crossbars
- Easy, clamp-on installation with included hardware
- Constructed of durable metal, aluminum, and rubber
Specs:
- Application: round, square, aero, elliptical, and most factory crossbars
- Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall
- Minimum crossbar length: 29"
- Long bolt kit (INISF711 - sold separately) lets you mount rack on crossbars up to 2" tall
- Minimum crossbar spread: 20"
- Carrying capacity: 3 short surfboards or 2 longboards
- Maximum thickness of stacked boards: 1-5/8"
- Carrier width: 31-1/2"
- Maximum board width: 23-1/2"
- Carrier weight: 15.5 lbs
- Limited lifetime warranty
This locking carrier lets you safely and securely transport 3 short surfboards or 2 long surfboards on your vehicle's roof rack. The carrier is easy to load and use with integrated straps and ratcheting hand knobs. Adjustable pads on the straps and rubber padding on the carrier base protect your boards during transport. The Locker installs easily with clamp-on hardware.
Easy-to-Load System
The carrier is easy to use and easy to load. There are 2 long straps that stretch over your surfboards and secure to 2 short straps. Connect the wire loops on the short straps to the hooks on the ends of the long straps.
Slide your boards onto the padded bars under the connected straps, then tighten down the straps with the ratcheting knobs.
When it's time to remove your cargo, lift the tension release levers under the covers to loosen the straps and unhook them.
Protective Padding
Rubber coating on the straps and adjustable corner pads help to protect your boards from scratches and scuffs during transport. Integrated rubber padding on the carrier base also adds protection for your boards.
Simple Installation
The carrier is simple to install and requires no tools. It clamps easily with included hardware to most crossbars. To install, flip the cam lever on the mounting clamp to loosen the bolt and release it from the lower mounting bracket. Slide the bracket under the crossbar and reattach the bolt to the bracket. Tighten the knob and close the lever.
Adapters are included for mounting the carrier on different crossbar styles. Adapter blocks let you mount the carrier to round or square crossbars. Rubber pads are also included for use when mounting the carrier to aero, elliptical, or factory crossbars.
Locking Covers
Four locking covers secure your boat or boards to the carrier and the carrier to your crossbars. With the covers locked and closed the ratcheting knobs cannot be turned and the tension-release levers cannot be accessed to loosen the straps. The locked covers also deny access to the mounting hardware so the carrier cannot be removed from your crossbars.
INA744 Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards
Item # INA744
Installation Details
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards - INA744
Average Customer Rating: 4.8 out of 5 stars (17 Customer Reviews)
This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation.by: Dwight 02/27/2023
I love the racks and the add-on surfboard carrier. It's so convenient to take my surfboard and other equipment like ladders for my work on and off with this system. It's reassuring to know that they are safely secured on the highway without any additional hassle with ropes or other tie-downs.
by: Caleb03/05/2023
Really useful and easy to put your board in and out.
by: Alan 08/03/2021
Just used them for the first time, wish I knew of these years ago. Boards are held in place securely and extremely easy to secure using the ratcheting mechanism. The crane is a fantastic idea, wasn't sure at first but it raises the back cable enough so the board can slip under it. No more going to the other side of the car to pass the strap under and over, as one must do with buckle style straps. Great product and recommend to all surfers looking for an upgrade to a faster system to secure boards to roof racks with some built in security. Thank You INNO.
by: Ruff09/15/2023
Great product
by: Pauline02/03/2022
I owned one 5 years ago. I sold the car and ordered another. The quality of the first one was better. This one took over 7 months to arrive. The winding tie down is very cheap and I already have trouble with it. they are not easy and at times get stuck. They are not as well made as the prior tie downs inno had.
by: Douglas 09/04/2021
Good product. The Inno Board Locker is a quality surf rack and it is straightforward in its installation and use. It is easy to put the boards on the rack and holds them very securely while travelling. I did have a small problem when installing them on my 2019 Subaru Forester with factory crossbars. The crossbars have thicker end pieces on them to attach to the raised rails. These thicker parts are just far enough apart to make mounting the surf rack difficult. I had to mount one end of the rack on the thicker part and the other end on the thinner aero crossbar. The Inno rack is just a bit too wide to mount in between the end pieces on the thinner crossbar iteslf. And it is a bit too narrow to mount on the thicker end pieces. It would be nice if the rack had adjustable end pieces so we could move the ends in/out to compensate for that difference. The INA466 might be a better choice because it doesnt come with a crossbar so the ends of the rack could be moved in/out slightly to accomodate this.
by: William06/02/2019
The Inno INA 744 arrived on time and in excellent condition. It fits my factory crossbars like a champ. Easy installation and working with etrailer was professional and a breeze. My long board surfboards fit nicely. Will definitely order from etrailer again!
by: Brandon 07/26/2022
I gotta say these make surfing prep a much easier experience. There is a bit of a learning curve during the first installation but once you figure it out it’s fairly simple.
by: Adam06/26/2019
I do love the carrier. It is super easy to use which makes it better than many of the household name carrier on the market. 5 stars.
by: Rick09/10/2020
Best carrier we ever used. Secure, holds mutiple boards, simple to use. Everything you could ask for in a carrier.
by: Thomas04/03/2022
Great racks. Easy install. Videos posted on e-trailer were helpful and realistic.
by: Mark W.12/19/2019
Works amazing, rock solid!
by: Russell and julie07/12/2018
Perfect fit - looks good - recommended
by: Louis09/09/2019
Very communicative and responded quickly to all inquiries.
by: Adam 06/06/2021
by: Louis 03/05/2021
by: Dennis 12/30/2022
17
17
See what our Experts say about this Inno Watersport Carriers
- Longer Bolt Kit Recommendation for Inno Boardlocker Carrier to Fit 2016 Subaru Crosstrek CrossbarsInno does offer a longer bolt kit part # INISF711 for use with the Inno Boardlocker part # INA744 you referenced which is designed for attaching to taller crossbars like what it seems like you have.
view full answer... - Roof Rack Fit on 2022 BMW M4 For Carrying LongboardsThere is indeed a roof rack for your 2022 BMW M4 that will allow you to carry your longboards. The rack is from Yakima, and I verified directly with them the parts you need, which are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 25 # Y84FR You can lock this rack to your BMW by adding lock cores, the Yakima SKS # Y07204. Then to carry a pair of longboards, what you can use is the Inno Board...
view full answer... - Difference Between Inno Surfboard/Kayak Carriers INA744 vs INA446The two Inno racks you referenced are pretty similar but the difference is that the part # INA446 is geared more for carrying a kayak or 2 boards whereas the # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. Basically the kayak geared rack has higher brackets that lock down for securing a tall kayak and the board orientated carrier has lower brackets for the straps.
view full answer... - Roof Rack and Surfboard Carrier for 2005 Mini CooperYes we have the Inno Square Bar Roof Rack part numbers # INB117, # INSUT, # INJK, and # INK118 that fits your 2005 Mini Cooper which would work great with a surfboard carrier like the Inno Board Locker # INA744.
view full answer... - Is Long Bolt Kit Needed to Install INNO Board Locker on 2016 BMW X3 with OEM CrossbarsThe long bolt kit part # INISF711 that you referenced is designed to allow the Inno Board Locker part # INA744 to fit up to 2 inch tall crossbars. The factory crossbars of your 2016 BMW X3 would not be that tall so this adapter would not be needed.
view full answer... - Best Aero Roof Rack for 2018 Nissan Altima to Carry SurfboardYou ask a very good question. Safe beats sorry every day of the week! The Rhino-Rack Vortex Aero rack, which includes black crossbar part # RRVA126B-2 that you referenced, along with parts # RRRLKVA and # DK381, will work great for a surfboard. This rack has a 165-lb capacity and it will be compatible with a wide range of carriers. I have included a link to our surfboard carriers that will fit aero-shape bars. I recommend the Inno Board Locker Surfboard Carrier # INA744 because it includes...
view full answer... - Roof Rack and Surfboard Carrier for 2008 Honda Accord SedanThe Inno square bar roof rack part numbers # INB127, # INSUT, and # INK745 which fits your 2008 Honda Accord sedan would be the rack I recommend as it's a higher quality roof rack at a lower price than it's competition. Then for a surf board carrier the Inno Surfboard Carrier part # INA744 would be a great solution as well.
view full answer... - Inno Board Locker # INA744 VS The Inno Locker # INA446 For Carrying Long BoardsThe Board Locker # INA744 is going to be a bit taller of a carrier compared to the Inno Locker # INA446. Both are going to wrap around your crossbars and work with whatever roof rack you may have, the mechanism is the same thing. You're right though, the board locker # INA744 is going to use it's own bar to support the boards. If it were me, I would get the Inno Board Locker just because it can carry 3 shortboards if need be. For you, I think it comes down to clearance. Since you have a...
view full answer... - Can the Rhino Rack Nautic Stack Be Used to Carry a Surfboard UprightI'll start out by saying that the Rhino Rack Nautic Stack # RRS520 is not designed to carry surfboards and I'm not aware of a product that will allow you to hold surfboards in this manner; because of their size and relatively low weight, they're going to be much more susceptible to wind mounted in this manner. I don't believe that a surfboard can be safely secured to roof crossbars in this configuration and the additional movement that would be caused by cross-winds would likely break the...
view full answer... - How to Carry a Kite Surfboard on a Roof rackBoards like your kitesurf board are too thick for ski carriers but we do have surf board and paddleboard carriers that would work. We have the follow: Thule SUP Shuttle # TH811XT Yakima SUPDawg # Y04075 Inno carrier # INA446 Inno Boardlocker # INA744 I have linked video reviews of a couple of these carriers for you.
view full answer... - What Roof Rack/Carrier Do You Recommend for Surfboards/Paddleboards on a 2021 Ford Edge?The great thing about having a naked roof on your 2021 Ford Edge is that you have the ability to mount an extremely secure roof rack system even without side rails. You will not need to install factory side rails in order to get the security you need. With that being said, I recommend the following roof rack system for your bare roof (with or without panoramic glass): - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked...
view full answer... - Longer Bolt Kit for an Inno Water Sport Carrier Mounted On a 2023 Rivian R1TLucky for you, Inno does actually offer a longer bolt kit for their Inno Board Locker Surfboard Carrier # INA744. You'll just need the Tall Crossbar Adapter Kit for Inno Winter and Watersport Carriers # INISF711. These kit includes 4 80mm (3.15") and 4 100mm (3.94") bolts so you shouldn't run into any more short bolt issues, if you do then you might consider swapping the carrier with a t-slot mounted version # INXA445.
view full answer... - Best Roof Rack to Carry a Paddle Board/Surf Board with a 2016 Honda Civic CoupeWe do have some roof rack options for your 2016 Honda Civic Coupe! The roof rack options we have are from Inno and I recommend going with the aero rack which consists of 54" crossbars # INXB138-2, Through Feet # INXS250, and Fit Kit # INK683. This roof rack has a weight capacity of 100 lbs but you will want to check your owner's manual to see if the roof of your Civic is rated lower. Then to carry your paddle board/surf board I recommend the Inno Board Locker # INA744. This is compatible...
view full answer... - Can Malone Paddleboard Carrier be Used on Highway for HoursThe Malone paddleboard carrier part # MAL75VR doesn't have a mileage limit and as long as you use it properly it will work, but are there more secure options out there that I would rather recommend...yes. The best option would be the Lockrack part # LR47FR which is very secure and easy to use. It's not cheap though. The Inno Board Locker part # INA744 is a great option too that's more secure as well.
view full answer... - Why Do Aftermarket Roof Racks for a 2015 Dodge Durango Have Bars that are More Forward than FactoryThe aftermarket roof racks for the 2015 Dodge Durango with a naked roof do have the crossbars somewhat forward on the roof of the vehicle. This is because the bars attach to the door frames and the rear doors of the vehicle are right around the middle of the vehicle. I attached a picture of a Yakima rack installed on a Durango to show you. With that being said, an aftermarket rack would still work great to carry a cargo box or paddleboard. Having the boards or the box loaded somewhat forward...
view full answer...
- Recommended Roof Rack for Surfboards and Skis on a 2023 Subaru CrosstrekIn order to carry surfboards and snowboards on a 2023 Subaru Crosstrek you'll first need to start with a roof rack, the most popular option due to the price is the Malone AirFlow2 Roof Rack part # MPG216 and it's hard to argue against this option. It features a clamp-on easy install, has aero shaped bars which provides the least about of wind noise, and it has locks for security. In order to secure your gear, I recommend the Inno Board Locker Surfboard Carrier part # INA744 for your surfboards...
view full answer... - How to Carry Surfboards on 2009 Honda Accord SedanI can get you everything you need to carry a couple surfboards on your 2009 Honda Accord sedan, starting with the roof rack you mentioned, the SportRack Semi-Custom Roof Rack # SR1010. This rack is compatible with the Inno Board Locker Surfboard Carrier # INA744.
view full answer... - Can I Use Inno Board Locker Surfboard Carrier On Factory Bars Of Toyota FJ Without An Adapter We have not yet had a chance to test fit the Inno Board Locker Surfboard Carrier The Inno Board Locker # INA744 on the factory bars of a Toyota FJ however, the carrier fits most factory cross bars as long as they are no larger than 3-1/2" wide x 1-1/8" tall which is pretty standard so I do not see you having an issue using this on the FJ. You do want to measure your bars to be sure. If your bars happen to be taller, you can use the long bolt kit # INISF711 to mount the rack to cross bars...
view full answer...
- Recommended Roof Rack and Paddle Board Carrier for 2002 Chevy SilveradoFor your 2002 Chevy Silverado, if you have the extended cab or crew cab I recommend the roof rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit # DK227 This rack is rated for up to 130 lbs. For your paddle boards I also recommend using the Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards # INA744. This is rated...
view full answer... - Recommended Surf Board Carriers, Tie-Downs and Trailer Hitch for 2014 Toyota Prius 3Thank you for your recent purchase of a Thule AeroBlade roof rack for your 2014 Toyota Prius Three. If you plan to load your surfboards directly onto the Thule crossbars then I suggest something more substantial than a standard bungee cord. We offer ratcheting straps such as Erickson # EM34410 which are 2-inches x 10-feet and which have vinyl-coated S-hooks to prevent scratches. The linked page will show you many similar items that will be far safer for securing your boards than even...
view full answer... - What is the Difference Between the Inno # INA446 and the # INA744?In addition to the SUP foam pad difference, the Inno Board Locker Watersport Carrier # INA446 is geared more for carrying a kayak or 2 boards whereas the Inno Board Locker Surfboard Carrier # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. With the # INA744, there are rubber pads (instead of foam) in between the clamps. Since the rubber is attached to the clamps, there will be no manual placement required. I went ahead and attached a demonstration...
view full answer... - Roof Mounted Carrier for 3 Wakeboards pm a 2013 Jeep Grand CherokeeWhat I recommend is to use a paddleboard carrier such as # INA445 or # INA744. They can hold up to 3 paddleboards, which are wider than wakeboards so width isn't an issue, but the vehicle will have to have crossbars. If your 2013 Jeep Grand Cherokee does not have crossbars that run side to side you can add some. I have linked the roof rack main page for your vehicle. You would just have to select either flush mount rails or no existing rails or bars to see the options.
view full answer... - Roof Board Carrier that can Carry More than One BoardIf you wanted a similar rack to carry 2 boards the Inno Board Locker part # INA744 would be a great option but the Curt you mentioned can only carry one board at a time.
view full answer... - Compatibility of Lockrack # LR47FR with 7-8ft. SurfboardWhen determining if the Lockrack Adjustable Stand-Up Paddle Board Carrier - 1 SUP # LR47FR works with your 7-8 foot surfboard, it really depends on the width of the board. With the Lockrack, this carrier can accommodate boards between 22-41 inches wide. If you have a board that is thinner than 22 inches, we do not carry shorter arms for the Lockrack carrier. If you have a thinner board, I recommend using a surfboard model that sandwiches the board with a tightening mechanism. For this...
view full answer...
Do you have a question about this Watersport Carrier?
Info for this part was:
Video by:
Zack K
Video by:
Joshua S
Video by:
Dustin K
Video by:
Chris R
Video by:
Zach D
Video by:
John S
Written by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Kathleen M
Updated by:
Lisa S
Updated by:
Ronnie R
Updated by:
Noah M
Test Fit:
Keith V
Test Fit:
Jared G
Test Fit:
Savanna B
Test Fit:
Matthew S
Test Fit:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.