Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors
(69 reviews)
Price: $8.94
In Stock
Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors
Item # HM48625
Retail:$22.99
Our Price: $8.94
You Save: 61%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (69)
- Q & A (0)
- Videos (2)
- Photos
Hopkins Accessories and Parts - HM48625
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- Hopkins
Use this bracket to mount your 7-way or 6-way round trailer connector on your vehicle. Built-in slot lets you easily install the bracket without having to disconnect your wiring. Black powder coat finish resists corrosion.
Features:
- Bracket lets you quickly and easily mount your 7-pole or 6-pole connector on your vehicle
- Built-in slot makes it easy to mount pre-wired connectors
- Just slip the wires through the slot when you mount the connector
- Sturdy steel construction is long-lasting
- Black powder coat finish resists corrosion
- Hardware sold separately
- 90-Day warranty
Specs:
- Overall dimensions: 3-3/8" wide x 3-7/8" tall x 1-3/8" deep
- Diameter of mounting hole: 2-1/8"
48625 Hopkins Electrical Mounting Bracket for 7-Pole or 6-Pole Trailer Connector - Vehicle End
Compare to Draw-Tite 18159
California residents: click here
Video of Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hopkins 7-Way and 6-Way Trailer Connector Universal Mounting Bracket Review
Hi there, Hollers! Today we're gonna be taking a look at Hopkins Universal 6 and 7-Pole Connector Bracket. This bracket is constructed of steel so you can guarantee that it's gonna securely mount your 6 or 7-way connector and it has a black powder coat finish on it that will protect it against rust and corrosion so you can ensure that your bracket's gonna stay mounted up and look good on your vehicle for a long time. Well first thing with the 7-way, you want to look at those cause a lot of them don't come with a mounting solution with your 7-way connector either. If you're adding one to your vehicle it's often a forgotten item and then you've got no way to put this on here. So if you follow along with us we'll show you how to get this bracket installed and we're gonna cover some additional features that makes this bracket a little bit easier to use than some of the competitors. So you're wiring up the 7-way on your truck and now you need a way to actually mount this thing cause you don't want it hanging down just here below.
This is a large connector. It's spring-loaded. We want an easy way to be able to pull this cover open and plug our connector in. Most of your after-mark hitches don't come with any mounting solution, so you're not gonna usually get that with your hitch. And most of your vehicles don't have any mounting solution in the back either unless you have the full tow package, which would already likely come with wiring and things like that.
Now some hitches do come with a tab which allows you to mount a bracket, and this is the bracket we're gonna be using for our 7-way here. But we also need a place for this bracket. And this is a long bracket here that we sell at eTrailer, this clamps around your hitch but you have to look at some of your hitches, they do have that pre-welded on here where there will be a small little bracket like this and it's designed to line up with the holes here from mounting either a 7 or 4-way bracket. The outer holes are typically designed for your 7-way, and that's what lines up with our bracket right here. Now no hardware comes included with your bracket here, but if you get a long bracket you'll get hardware to mount to your bracket up to the long bracket.
You also don't get any hardware for mounting up your 7-way on to the bracket as well. So you'd want to provide your own hardware. A lot of times when you get a 7-way it comes with its own hardware so we're gonna be using the hardware that came with this 7-way. So we can now start installing our bracket. If you look, there's a slit in the bottom of this bracket and this may or may not be useful in your setup.
It depends. You can use it to slide your wiring through. You can see how we can take our 7-way wiring here and we can just work it through the slit. The purpose of this is to you don't have to disconnect your electrical connector from your 7-way when mounting it up. Now if you try to get it on here and you're really fighting it, this one is too skinny. You could disconnect it or rather than disconnecting the work you did, you can just bend the bracket just a little bit and that will allow you to slide your wiring in there and we can just straighten it right back out. Just a little minor bend there is all that we needed and our bracket looks great, everything is still connected and now we can bring it up. Now if we look at our bracket real quick before we connect it, we can see that we've got multiple different holes here and they are slotted, and the purpose of that is to allow it to work just about every manufacturer because the distance for your holes on your 7-way are gonna vary from manufacture to manufacture but we can see here when we line it up, that it lines up with those slots all the way around. So now we're just gonna use the hardware that came included with our long bracket to attach this up here and then we use the hardware that came with our 7-way to attach it there. So we put the bolts on top, and then drop our bolts down through both of the brackets. And then we'll take the nuts on the bottom. These ones have star washers on them, you want the star washers facing towards the bracket. And then we'll snug these up. In most cases, you've got a lot of tight clearance here. You can usually just hold the one and then snug it down with the other and that pressure keeps it from spinning and gets nice and tight. We're using the 3/8 socket for the hardware that came included with the long bracket. Now we'll just line up our 7-way with the slots that work best to give us a nice leveled 7-way. We'll then slide the hardware through. Again, this is the hardware that came included with our 7-way. If you need some you can get some here at eTrailer or at your local hardware store. Once you slide the hardware through there, we're gonna follow that up with a flat washer lock washer in a nut. If you get hardware that has nylon locking nuts you can omit the flat washer and lock washer. Now we can go back into tightening up our hardware it's gonna vary if you've got your own hardware, what it comes with, if you're using a hardware that came with your curt 7-way, you use an 8 mm on the nut and then just the phillips to tighten it down. Now that our 7-way is fully mounted up we're ready to plug it in to our trailer and make sure everything is working properly. And that completes our look at Hopkins Universal 6 or 7-pull connector bracket..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors - HM48625
Average Customer Rating: 4.7 out of 5 stars (69 Customer Reviews)
Use this bracket to mount your 7-way or 6-way round trailer connector on your vehicle. Built-in slot lets you easily install the bracket without having to disconnect your wiring. Black powder coat finish resists corrosion.by: Paul07/05/2023
I was having trouble with the review and decided to wait to see how a return would be handled. The product does not come close to fitting the hitch I bought. And though it is described as universal it also isn’t compatible with the Honda OEM wiring Adapter. (etrailers wiring harness was backordered with a long lead time)
by: Don B02/26/2017
Didn't realize that Traverse tow wiring kit PN 118271 didn't come with a mounting bracket. Discovered this on a Sunday. Needed a "universal" type like this one. I called eTrailer on Sunday afternoon and Bill went to the warehouse and verified that my Tekonsha 7-way connector would fit on this mounting bracket. It did, and he mailed it to me. Fit's great.
by: Jeffrey05/15/2023
Well made, not rusting and mounted easily. While it did do the intended job adequately, on a 2021 Honda Pilot it places the entire cable assembly and plug directly in the way of the pin for the ball hitch. This means getting the ball in and out of the hitch is very time consuming. Luckily I tow 4 times a year so it’s not the end of the world for me.
by: Robert 04/24/2023
Works well. Especially with wiring slit to help with mounting.
by: Richard03/29/2023
Bracket is great the only thing there was no hard wear to install the bracket
by: kent05/19/2021
I completed the connecting of all the wires to the 7-Way connector that comes in the ETBC7 kit. I used a flexible tubing to enclose all the wiring, which protects it from moisture kicked up from driving it wet or snowy conditions). The ground wire was secured and all the wiring tucked up out of the way and zip-tied into place). This alternate location for the 7-Way connector is much more satisfactory
by: Don B05/04/2020
The Plug holder works well. I had to mount it on the opposite side (Right side) of the receiver because if I mounted it on the receiver where the bracket was, I could install the cover over the receiver. But all worked out fine.
by: Alberto09/28/2018
Would have been nice to get the bolts nuts and washers with the bracket for the trailer hook up and would have been nice to know that the pins I bought are barely long enough to make it through the mounting bracket required me to bend them to make them fit.
by: Eric01/12/2020
EASY INSTALL FOR HITCH, ALTHOUGH THE 7 WAY WIRING HARNESS 118287 DOES NOT ALLOW FOR THE CENTER PANEL TO GO BACK ON. BRACKET IS HOPKINS HM48625 AND IT SHOULD INCLUDE HARDWARE.
by: Robert P02/20/2017
I am very happy with all the products and prices of items I have purchased from
etrailer. Item # HM48625 is very well made and easy to use. The slot at the bottom is a excellent addition that makes even easier to use.
Unfortunately I doubt that I will be ordering from etrailer in the future due to there practice of blowing up my computer with pop up's and ads. This practice turns a pleasant experience into a negative one.
by: Bob B12/07/2019
All components exactly as listed. Having [video] clips for mounting a hitch and wiring my 06 Odyssey was outstanding.
by: Frank04/21/2022
A definite must have if you're installing an electrical cable. It really made the installation look professional.
by: Allen05/03/2019
Good product. Mounting holes were a little small for my bolts.
Allen F.
5/6/2020
Working very well
by: Thang02/10/2022
Good companion with the trailer hitch.
by: Thomas 02/19/2021
Worked as designed, needed to mount 7 pin trailer connector.
by: EPH01/18/2021
Perfect for what I needed...so far ALL of the many products I've purchased from etrailer have been great quality with great customer support and services...
by: C B09/10/2021
Fit the DrawTite hitch on my Passport p erfectly.
by: Keith02/19/2021
This one fit perfectly! It really is universal. I ordered another style and the bolt pattern didn't fit my 7 pin head. Ordered this one and had it installed in 2 minutes.
by: Satisfied C01/07/2022
Paula and Korren were both very knowledgeable and helpful getting me the right parts for my trailer set-up.
by: Ronald05/19/2022
easy installation good fit
by: Travis04/22/2021
It works great, but doesn’t come with any hardware...
by: Todd07/23/2021
Easy to install with clear instructions and well made.
by: Jerrold11/04/2022
Box is in bad condition . Everything seems to be okay.
by: Norm A03/13/2020
Looks Good and isn't rusting what more can I ask for.
by: Tim Y03/30/2017
Everything showed up in good shape within a week of placing the order.
25
69
Show More Reviews
See what our Experts say about this Hopkins Accessories and Parts
- 7-Way Mounting Bracket that Comes with Mounting HardwareThe Hopkins 7-way bracket part # HM48625 does not come with hardware and there isn't a set hardware size we can recommend for it but we do have the similar Pollak 7-way part # PK12711U which comes with small machine screws and nuts. I would recommend getting something similar but also it really depends on what 7-way you have. The 7-way may have hardware for this already included as well. The size of what comes with the Pollak is four 3/16" x 5/8" long screws, four 3/16" nuts, and two...
view full answer... - 7-Way Mounting Bracket For 2003 Chevy Avalanche and How to Pick Out Weight DistributionThat we normally see all 7-way blade connectors are the same size and will connect to each other. The pins are blades though and not round pins correct? Do you have any pictures?
view full answer... - Dimensions of Hopkins 7-Way Trailer Connector Mounting BracketThe mounting bracket is 3-3/8 inches across and 3-7/8 inches tall. The mounting holes on top of the bracket are 2-1/4 inches apart center on center. The holes to mount the 7-way to the bracket have a few different options. The two round holes on the sides are 2-7/8 inches apart. The top set of the four holes are 1-3/4 inches across and 2-1/2 inches up and down. The other set of holes are 2-1/2 inches across and 1-1/8 inches up and down. Some of the hole spacing is hard to explain...
view full answer...
- Recommended Replacement 7-Way Mounting Bracket for a 2013 Acura MDXWe aren't going to have an exact OEM replacement, however you could just use the Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors # HM48625 which is a universal bracket that'll work just the same. This bracket measures 3 3/8" across, 3 7/8" tall and the mounting holes on the top of the bracket are 2 1/4" center to center.
view full answer...
- Dimensions of Mounting Bracket Included with Hopkins Endurance 7, 5, & 4-Way Flat Trailer ConnectorThe mounting bracket for Hopkins trailer connector # HM48470 has the top mounting holes spaced 2-1/4 inches apart on center. It is 3-3/8 inches wide and 3-7/8 inches tall. It is very similar to # HM48625 though without as many mounting holes for the connector as # HM48625.
view full answer... - Mounting Bracket For Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM47210The Hopkins Universal Mounting Bracket # HM48625 will allow you to mount the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM47210. Be sure to use Dielectric Grease # 11755 on the connector to prevent shorts in the connectors.
view full answer... - 7-Way Mounting Bracket Recommendation for Use with Curt Trailer Hitch C15810The Curt hitch part # C15810 does not have a bracket built into it for mounting trailer wiring. Since your truck has a 7-way what you'd want is a 7-way mounting bracket like part # HM48625 which will attach to the bumper of your truck and allow your 7-way to attach to it. Don't install this on the hitch though as you shouldn't ever drill into the hitch.
view full answer... - Correct Bracket for 7-Way T-One Vehicle Wiring Harness On 2015 Chevy TraverseThe T-One Vehicle Wiring Harness for Factory Tow Package part # 118271 will need to use a bracket with slotted holes like the Hopkins Universal Mounting Bracket part # HM48625. This can then be used with the No-Drill Mount Bracket part # 18136.
view full answer... - Mounting Bracket for 7-Way on 1997 Ford F-350The Pollak Bracket for Single-Pole Trailer Wiring Socket # PK11771 is only a fit for certain Pollak sockets and is not designed specifically to fit any year, make or model of truck. What I recommend is the Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors # HM48625 which is going to be a fit for 7-way and 6-ways connectors. I have added a link to a video review of the Hopkins for you to check out.
view full answer... - Mounting Bracket to Use with Blue Ox 7-Wire to 6-Wire # BX88206The Hopkins universal mounting bracket part # HM48625 would be a great option to use as a mounting bracket for the connector of the # BX88206.
view full answer... - Can the Draw-Tite Hitch for a 2009 Toyota Highlander Be Used with Weight Distribution The Draw-Tite Max-E-Loader Trailer Hitch Receiver part # 75726 which is a fit for a 2009 Toyota Highlander can be used with a weight distribution system and does have a bracket for securing a trailer connector. That said, you still need a second bracket to attach to this based on if you have a 4 or 7-way trailer connector. If you have the latter then you'd need the Hopkins Universal Mounting Bracket for 7-Way part # HM48625. If you're looking for a weight distribution system, the Curt...
view full answer... - Replacement Wiring Harness Bracket for 2004 Chevy Silverado 2500HD with New Curt HitchIn order to mount your OEM wiring connectors to the Curt Trailer Hitch Receiver # 14211 on your 2004 Chevy Silverado 2500HD we have the No-Drill Bracket # C57202. This wraps around the crosstube of the trailer hitch and allows you to mount a connector that has a bracket like part # HM48625. If you're also needing a new connector then I recommend using the Hopkins Endurance # HM40975 because it looks great and is actually the OEM replacement for a lot of different pickups.
view full answer... - Can Curt Echo be Permanently Mounted on Trailer TongueI spoke with my contact at Curt and he said that the Echo # C51180 should not be permanently installed on the trailer frame. Even though it can withstand the elements it isn't meant to be left out when not in use. To mount the 7-Way on your Subaru Outback Wagon so that the Echo can be used I recommend using the 7-Way Mounting Bracket # HM48625 and then a No-Drill bracket like part # 18136 or # 18140 to keep from drilling into your fascia or trailer hitch.
view full answer... - 7-Way Trailer Connector For a 2023 Nissan Frontier The T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266 will provide you with a 7-way connector in your 2023 Nissan Frontier with no tow package. I recommend adding the Hopkins Universal Mounting Bracket for 7-Way # HM48625 and the No-Drill Mount Bracket # 18136 for mounting the 7-way. If you ever need a 4-way connector, you can use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 which will adapt the 7-way to a 4-way.
view full answer... - Will Self-Tapping Screws in 2005 GMC Sierra 2500 Curt Hitch Receiver Weaken HitchPutting self-tapping screws into the Curt Trailer Hitch Receiver # C15312 for your 2005 GMC Sierra 2500 won't weaken it but I can't speak to the warranty part. I would think that something that small would be a non-issue unless for some reason your modification was a bit extreme and actually damaged the integrity of the hitch itself. With all of that being said, the good news is that you can use the Curt No-Drill Bracket # C57202 and Hopkins Mounting Bracket # HM48625 to avoid drilling...
view full answer... - Can The Wiring Be Removed From The Round Connector To Route Through Mounting Bracket? There are small retainers on the wiring for the T-One Vehicle Wiring Harness # 118286 which will allow you to remove them from the round connector. The tabs are part of the metal terminal you press into the connector. You will need some very small pics to press the tabs. This connector should allow you to still pass through the Mounting Bracket # PK12711U. Another option is to make a small cut in the mounting bracket to make it like the Bracket # HM48625. That small slit will allow you...
view full answer... - Mounting Brackets for Trailer HitchWe undoubtedly have mounting brackets for your wiring harness, though I'm not certain what vehicle you have and we do not have mounting brackets made specifically for OEM harnesses. However, there are many universal parts such as the Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors # HM48625 or Mounting Bracket 4-Pole Flat # 18144 which you would use with the No-Drill Mount for Electrical Mounting Bracket # 18140. Or if you cannot use a wrap-around mount you can...
view full answer... - Recommended Mounting Bracket for Curt T-Connector 7-Way on a 2013 Nissan XterraI do have a solution for you but when I went out to the warehouse and tested the Curt T-Connector # C56226 with the 6 and 7-Way Trailer Connector Mounting Box # 18159 that you referenced to find that they actually aren't compatible due to the mounting hole locations on the Curt 7-Way. Instead of the Draw-Tite mounting box I recommend going with the Hopkins Universal Mounting Bracket # HM48625, which has a variety of mounting holes that will line up, and the No-Drill Mount Bracket # 18140....
view full answer...
- Tekonsha 7-Way Wiring Harness vs. Curt 7-Way Wiring Harness for 2018 Honda PilotThe difference between the 7-way harnesses available for your 2018 Honda Pilot comes down to quality and reliability. Over the years we have found the Tekonsha brand to be far more reliable than Curt so I strongly recommend the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer # 118286. This harness also has higher maximum amperage than the Curt which means it offers you better protection against potential shorts. To mount this use mounting bracket # HM48625. I have...
view full answer... - Recommended Trailer Hitch and Wiring for a 2020 Honda PilotThe trailer hitch I recommend for your 2020 Honda Pilot is the etrailer # e98840 because it has a tab that is already attached to the crosstube that you can install a bracket for your wing plug on. If you are needing a 4-Way plug for trailer lights I recommend the T-One # 118760 with the bracket # 18144 but if your trailer has a 7-Way connector then you need the T-One # 118286 with the bracket # HM48625 instead. Attached are some installation videos of these products on recent model Pilots...
view full answer...
- Parts Needed to Install 7-Way and Brake Controller in 2019 Honda PassportYou are on the right track to install the 7-way and brake controller in your 2019 Honda Passport. The first thing you need is the 7-way part # CU86FR and then to install the P3 part # 90195 you'd just need the part # 3070-P and you'd be set. Then the mounting bracket part # HM48625 would work to mount the 7-way as well.
view full answer... - How Do I Install A Mounting Bracket To A 7-Way Harness That Does Not Have A Removable Connector?There are screws on the back of the TorkLift Wiring Harness Extension # TLW6021 as you can see in the photo that I included. You will need to loosen the screw that pinches down on the wire to hold it in place. Then you will be able to remove the screws located near the mount plate to gain access to the wiring. It is a good idea to take several pictures and to write down what color wire goes to which terminal before removing the wires. Once you have removed the wires you can attach the...
view full answer...
- Recommended Trailer Hitch, 7-way Connector, And Trailer Brake Controller For 2016 Ford Transit T350I would be happy to recommend everything you will need to add a trailer hitch receiver, 7-way trailer connector, and trailer brake controller to your 2016 Ford Transit T350 with the extended wheel base and high top conversion. Starting with the trailer hitch receiver I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98842 which has a 900lb tongue weight rating and 6000lb trailer weight rating. If you use a weight distribution system the...
view full answer... - Curt Echo Wireless Brake Controller Compatibility with 2016 Thor Palazzo and Trailer Side MountThe Curt Echo Mobile Trailer Brake Controller - Wireless # C51180 can be hard mounted to the trailer but it cannot have any flop or movement of the unit because it is inertia based and needs to be able to find the consistent point to monitor movement from. The direction of the controller isn't an issue so if mounted to the side frame at an angle is okay. You can use an extension like the Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long # C56080 which can be shortened or coiled...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/12/2023
It is a universal bracket that will fit most adapters however a few here and there are not a fit. I will have our Customer Service team reach out to you.