Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rust-resistant steel wheel chocks help stabilize an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fittings allow you to easily move the chocks to different anchor slots on horizontal E track.
Features:
Specs:
E-Chocks help stabilize race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer. And unlike other wheel chocks that have to be permanently installed, these wheel chocks can be quickly and easily moved to different anchor slots on horizontal E Track (sold separately). This means that you can easily adjust your setup depending on what you're hauling. The spring-loaded levers on the E Track fittings let you snap the wheel chocks into place and then remove them when you need to install them into different anchor slots. These chocks are perfect for use with E Track tie-down straps (sold separately).
Average Customer Rating: 4.7 out of 5 stars (455 Customer Reviews)
Rust-resistant steel wheel chocks help stabilize an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fittings allow you to easily move the chocks to different anchor slots on horizontal E track.The Erickson E-Chocks are well built and a great size for what I do. I often have to move disabled cars around and I can quickly pull a car up on my trailer with the winch to the chocks, and then move it where I need to without strapping the car down. I wouldn't drive down the road that way. I use them on the road to prevent the cars from shifting forward during braking and haven't had any issues with them.
I sent a message to contacts asking for information, no one ever replied. "I'd really like to make my e track more versatile. My Wife and I bring ATVS and Mountain bikes. Your accessories provide no way to mount mountain bikes. i imagine one of your I don't know what your call the mechanism that clicks into the e trac that would have a flat platform that accessories from other companies could be bolted to. In my case it would be mountain bike mount like this Hot Rod from Rocky Mounts. https://rockymounts.com/products/hotrod.html
Once you have a platform that locks to your track that could be bolted to aftermarket stuff the possibilities would be endless. I'm going to have to modify one of your attachments to do what I need Thank you, Fred Judson"
I won’t do business with this company again.
Received these today and put them in my enclosed trailer and they snapped into theE-Track just like they were supposed to, then I pulled my 2022 Slingshot in and right up to them and strapped the Slingshot down and hit the road. When I got back home and checked on the Slingshot it hadn’t moved at all, that was so much easier than bolting a 2x4 onto the floor of my trailer to use as a chock. I wish I had found these a lot sooner and it would’ve made transporting the Slingshot or any of my vehicles a lot easier and faster. This is an amazing product.
John C.
10/6/2023
The E-track is fantastic so far with absolutely no problems whatsoever, I love it and use it almost daily basis. For the most part I use it to strap down my Slingshot and spare wheels but other times I’ve used it to hold furniture, tools, totes or pretty much anything. They’ve been a lifesaver for my trailer trying to find a way to strap things down. Whoever designed this system sure helped the needs of a lot of customers.
John C.
10/21/2023
Mike the e-track was well worth the price I paid for everything and it all worked perfectly for me the entire time I owned my trailer. I unfortunately sold my trailer this year but if I turn around and purchase another trailer you bet I will purchase another e-track system for it. Thanks for everything
Perfect fof SxS hauling with e-track and ratchet straps. No wear on the suspension.
Outstanding wheel chocks. Sturdy and very well made. A great level of extra security when using with tie downs.
Great design with Extra Heavy Duty steel, for securely locking into E-Tracks. A great asset to lock down any wheeled vehicle or equipment! I absolutely love this heavy gauge steel trailer chock.
My e-chocks work great. Only thing about mine was I had to trim a little off for mine to fit inside my e-tracks. Other than that great product.
Absolutely horrible quality. The weld on this product appears to be done by someone that has never touched a welder before.
Jenny N.
2/19/2024
I know that these chocks will not be the prettiest however the welds should be good. Would you be able to send a picture of them so that I can look into this for you.
Would have been 5 stars but I had a little grinding to do, due to a factory welding error. Other than that, they do exactly what I need, added security to a strapped-down racecar.
Nice steel wheel chocks
At first, a bit tricky to fit into our CargoSmart system but I was finally was able to get them in place. Seems to help stabilize the golf cart in the trailer going down the road.
Heavy duty and nice quality. Will use two at the front wheels. Welding is known to warp and twist shapes with the heat(and cooling). Neither of my chocks fit into the e-track as the bases on both chocks were warped from welding. I would guess all the others in stock bear the same issue. Some coaxing with a hammer is needed to insert these into the e-track. Once installed, they will work well. Carry a small hammer!
These work great for loading and hauling my side by side.
David
3/21/2024
I really like the e-track. I have lots of confidence in towing and have received a lot of positive comments from others.
Works great, excellent value
Michael
4/7/2024
Durable, the finish has held up and the attachment points are still firm and solid despite many “mountings and unmountings” from the track
Works as advertised. I will order from etrailer again.
Lennon
6/7/2020
Yes the E Track works as advertised.
Over the years I have purchased several items from etrailer.com. The products perform flawlessly, the customer service and communication exceed my expectations, and the website is very easy to use. Start with etrailer for your next search regarding towing and load securing.
Mark
6/20/2023
I had to modify it to work with my recessed E-Track by cutting the edges back. They work great now and once I load the car in the trailer and set the chicks, it is an easily repeatable load
does the job of keeping my car from banging around the trailer if the tie downs loosen. Also leaving the front set in place permanently makes it simple to put the race car in the same place every time.
One nit: one of the chocks of 4 was not perfectly assembled before welding and a little grinding on an ear was required to make it click in properly.
Heavier , Taller & Wider than expected...
moveable in e track , can easily find that soft spot...
... find the center of trailer AND adjust tongue weight ..
... nice and a great price ...fast ships !
D.c.j
6/19/2020
Haven’t had a chance to use them...car trailer sitting idle ...??
They work as advertised.... The chocks combined with a single strap over the tires hold the vehicle in place.
Ed C.
9/4/2023
The E-Track functions well but the black anodized finish looks gray and oxidized. I would suggest buying the galvanized version for others. The wheel chocks and the single strap tie downs work well. The straps are easy to put on and they hold the vehicle securely. Im pleased.
I had to grind a bit off the bottom corners because my E-Tracks are recessed but after that they work great.
Convenient. Easy to use. Stable. Great purchase along with e track and wheel straps for side by side.
Doesn't fit the e track very well.you have to force it to fit in and clip to the e track correctly
As always on time and as ordered!
These are the best wheel chokes available in my opinion! Very pleased with them.
Great product!
Do you have a question about this E-Track?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
3/12/2024
I have gotten in contact with both Rocky Mounts and Erickson Manufacturing. They both have confirmed that the Hot Rod will not attach to the e-tracks as desired. Per Paul at Rocky Mounts; all of their bike mounts will only fit "key tracks" and "L-tracks". Unfortunately, they do not have any options that will fit on the E-Tracks. I also reached out to Kristin at Erickson Manufacturing, and she has confirmed that they do not have any actual bike mount style clips that will connect a bicycle to E-Track. Her best suggestion was using a ratchet strap; so, I found a solution that should work for your mountain bike set up on the E-Track. I recommend using a Ratchet Strap like part # 3481768, that will connect directly to the E-Track. The way you would make this work, would be to wrap the strap around the base of the seat on your mountain bikes. You will also want to install a motorcycle chock, like part # 3481731, on the front wheel of your bikes to ensure stability.