Hardware For Installing E-Tracks on Marine Plywood Trailer Deck
Question:
Do you have a recommendation for wood screws to secure to a marine plywood trailer deck?
asked by: Larrry C
Expert Reply:
Because of their versatility there isn't a specific type of wood screw that's recommended when installing the Erickson E-Tracks like # E19148. The screw length will depend on the thickness of your trailer deck but for thinner marine plywood I do recommend adding Backing Plates # e96RR to reinforce the connection.
I have attached a sample install video as well that you might also find helpful.
Products Referenced in This Question
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Product Page this Question was Asked From
Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- E-Track
- E-Track Wheel Chocks
- Erickson
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Are Retractable Straps Available With a Cam Buckle Mechanism?
- Article: Determining Trailer Tongue Weight
- Q&A: Can Wheel of Vehicle Rest on E-Track When Using Wheel Chocks
- Article: Pintle-Hitches
- Article: Trailer Tire Sizing
- Q&A: Hardware Recommendations for Installing E-Track
- Article: Cargo Tie-Down Methods
- Q&A: Demco Bolt on A-Frame Coupler to Replace Welded On Coupler
- Q&A: What is The Height From The Track To The Bottom Of The Roller on E-Track Roller Idler # e67HR?
- Q&A: Does the Tow-Rax L-Track Have a Weight Capacity