Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches
(8 reviews)
Price: $8.44
In Stock
Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches
Item # DL24362
Our Price: $8.44
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
Dutton-Lainson Accessories and Parts - DL24362
- Trailer Winch
- Hardware
- Cable Fastener
- Dutton-Lainson
Threaded fastener attaches winch cable to Dutton-Lainson brake and pulling winches. Works with 1/4", 9/32", and 5/16" cable diameters.
Features:
- Threaded fastener for attaching cable to Dutton-Lainson brake and pulling winches
- 1/2" Diameter cable fastener
- Fits pulling winch models DL1602A-DL3200A
- Fits brake winch models B1500-B3503 and DLB1200A-DLB2500A
- Works with 1/4", 9/32", and 5/16" cable
- Tighten nut to pinch cable against reel side plate
- Includes a 1/2" fastener, a 1/2" hex nut, and a 1/2" washer
Note:
- Keep at least three turns of cable on winch drum at all times.
- Does not work with cables on worm gear winches.
24362 Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches
Customer Reviews
Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches - DL24362
Average Customer Rating: 4.9 out of 5 stars (8 Customer Reviews)
Threaded fastener attaches winch cable to Dutton-Lainson brake and pulling winches. Works with 1/4", 9/32", and 5/16" cable diameters.by: Richard S02/24/2014
Exactly what I needed. Just would like this product also in 3/8 in and 7/16 size.
by: James09/06/2019
The absolute easiest way to attach cable to winch body
by: Slava A.09/21/2016
Very nice product! I am happy!
by: Raymond01/25/2018
No problems at all.
by: Mike Mac06/02/2016
Quality is excellent.
by: Linda04/01/2022
by: Dan 09/20/2022
by: Larry07/25/2012
Worked well
8
8
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Parts Recommended to Hang 800 Pound BoatI have a solution for you, and you can use ratchet straps to support your boat once you have it in the air. However, we do not recommend raising or lowering the boat with ratchet straps. The ratchet straps are rated for use as tie-downs, not as lifts. Additionally, there is no safe way to control the speed at which the boat is lowered with the ratchet straps. Fulton High Performance Brake Winch # F143100. This winch is capable of handling up to 1,500 pounds and has a self-activating brake...
view full answer... - Mounting 1/4 Inch Cable to Hand WinchThe Cable Clamp for Pulling and Brake Winches by Dutton-Lainson # DL24350 is compatible with 1/4 inch stainless Steel winch cable like the Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs # DL24104. You can also use the Cable Fastener for 1/4", 9/32" and 5/16" Cable and Heavy Duty Winches # DL24362 or the Cable Fastener for 3/16", 7/32", and 1/4" Cable and Medium Duty Winches # DL24361 to fit your 1/4 inch cable.
view full answer... - Recommended Cable With Hook for Dutton-Lainson Hand Winch # DL15440The correct cable with hook for the Dutton-Lainson Hand Winch # DL15440 is the # DL24104. This is a 50 foot long 1/4 diameter galvanized aircraft cable with safety hook. The cable fastener you will need for this is the # DL24362 which is sold separately from the wire cable. If you prefer the strap the one recommended for this hand winch is # DL24251. This 2 inch wide strap is 20 foot long and comes with the safety hook as well as the bolt to secure it to the winch. I have linked all...
view full answer... - Looking For Winch For Jet-Ski Trailer Where Handle Can Be Swapped to Other Side of WinchThe lowest capacity hand winch we offer that the handle is easily changeable would be the Dutton-Lainson # DL14527. The folks at Dutton-Lainson have told us that this winch is capable of being modified. The drum, its shaft, the gear shaft and pawl shaft would all need to be removed, and reversed. The gear shaft is held in place by both a nut and an e-clip that would need to be removed. I have labeled these parts in a photo I have edited for you. In other words, some dis-assembly would...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard S.
2/24/2015
Working great, also no problem with the winches I put the part on. Now have a couple of my neighbors using same type winch. Very pleased with purchase.