Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - 3,500 lbs

See what our Experts say about this etrailer Accessories and Parts

• How To Find Correct Bearing Kit for 1995 Carson Trailer
  I do have some options for you along with helpful information but finding parts for a trailer is not easy, especially one as old as yours. If it has 10" brakes with 5-lug hubs then odds are good it has a 3,500 lb axle which is most common. In which case, the Hub Bearing Kit part # DBRKHW35 would be what you need to replace the bearings and seals. If you can find the axle capacity listed on the axle tag in the center of the beam you can confirm this otherwise you'd need to pull the hubs...
  view full answer...
• Upgrading 8" Hydraulic Brakes to Disc That Will Fit a 10" Wheel and Tire
  The Kodiak Disc Brake Kit # K2HR35D-8 is designed to fit a #84 Spindle # TRU64FR that is typically found on 3,500lb axles. This kit use 8" rotors allowing you to fit a Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel # AM3H490. You will need either the EZ Lube # DBRKHW35EZ or Standard # DBRKHW35 Bearing Kit to mount the included hubs on your spindle. You will also need to upgrade your surge coupler from drum to Disc # DM62VR. If you can tell me exactly what coupler you have...
  view full answer...
  
• Bearing Kit for 3,500 lb Axle with Grease Seal Part Number 171255
  The seal part number you mentioned of 171255 does match up with it being a 3,500 lb trailer axle so the correct bearing kit would be the part # DBRKHW35 that you referenced.
  view full answer...
• Correct Replacement Disc Brakes for Venture Boat Aluminum Bunk Trailer VATB-5225
  The Kodiak Disc Brake Kit part # K2R35DKG I am able to confirm will fit your Venture Boat Aluminum Bunk Trailer VATB-5225 based on the old part numbers provided. That said, for slightly more money you can upgrade to the much more seamless hub/rotor design in the Kodiak Disc Brake Kit part # K2HR35D. Either way, I'd replace the bearings if they are due using the Bearing Kit for Trailer Brakes part # DBRKHW35 and part # DBRKHW35EZ.
  view full answer...
• Correct Bearings and Grease Seals For Upgrading to 10" Hydraulic Disc Brakes
  For the Kodiak Disc Brake Kit # K2HR35D there are 2 options for you depending on if you have an EZ lube spindle. For EZ Lube Spindles the Bearing Kit # DBRKHW35EZ will give you 2 grease seals, 2 inner bearings, 2 outer bearings, 2 EZ lube Grease Caps and 10 lug nuts. For standard spindles the Bearing Kit # DBRKHW35 will give you 2 grease seals, 2 inner bearings , 2 outer bearings, 2 grease caps and 10 lug nuts. For standard spindles you can upgrade to the Bearing Buddy # BB1980A-SS...
  view full answer...
• Parts Needed to Add Disc Brakes or EOH Brakes to Tandem 3,500 lb Axles on Boat Trailer
  We can get both of your axles set up with disc brakes, and for 3,500 lb axles, since you are converting to disc brakes you'll need a hub-and-rotor disc brake assembly. For the correct kit, as well as the disc brake actuator and brake lines, here is everything you'll need (note for a tandem axle trailer you'll need two of the disc brake kits): - Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet # K2HR35D - Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - 3,500 lbs #...
  view full answer...

Do you have a question about this Accessories and Part?