Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this LED dual trailer stop, turn, tail and backup tail light with the red and the clear lens. This is a rectangular LED trailer light, which will work as a stop, turn, tail and reverse light on your trailer. You can see it's a very nice thin rectangular design, which is very lightweight. And it does use LEDs, which make great replacements for incandescent lights.
LEDs will last 50 times longer. They are more efficient because they provide better light with less power output. And of course, no bulbs to replace or brittle filaments to break.This does use a nice red and clear lens. Has 20 white LEDs, 10 on this light and 10 over here. Now, at the end of this video, I'm going to hook this up to some 12 volt power just to show you how the lights, how bright they are, and how they operate.This light is compatible with 12 volt DC systems.
It is designed to mount on the surface of the trailer. Now, the hardware is installed this is not included, but it does include this foam mounting gasket that you'll use when you install it. It is a four wire design, has a black wire for the tail light, white for the ground, red for the stop and turn, and then the purple for the reverse function. The length on the wire leads are about seven inches. The slide is DOT, Department of Transportation compliant.
Give you some dimensions on this and then we'll hook it up.So the overall width on the slide from one end to the other is right at nine and 5/8 inches long. Height of it is right at seven inches tall. And the depth on it is only about 5/8 of an inch deep.So we're going to do now is I'm going to hook these wires up. So get our white wire for the ground, our black wire for the tail lights, and our red for the stop and turn. And then the purple I'll be attaching that to the power, just to show you the reverse section.So we'll go ahead and turn on the 12 volt power.
And there you can see the tail lights come on. I'm going to go ahead and turn off the overhead lights. There's your tail lights. And then when you hit your brakes, you can see your brakes, how they'll light up brighter. And then if you operate your turn signals, you can see there's your turn signal. And then again, if we do the reverse, there's your reverse. See the reverse is very bright white light. So it lets everybody know that you're backing up.We'll go ahead and turn back on our overhead lights. And we'll turn off our power. But that should do it for the review on this LED dual trailer stop, turn, tail and backup tail light with the red and the clear lens.
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.This is second unit we purchased. They are to replace originals on a jayco RedHawk that cracked and developed electrical shorts. Recommend you buy the pair and replace both at the same time. They look a bit different from the original equipment. The first we had installed looks very good.
When i order tail lights ,I always get 2 , not with you . I only got 1.
I had a failure with OEM light and found a close looking replacement but only better. The replacement light is a little thinner and looks better so I purchased another one for the other side. It just takes a little basic electrical knowledge and some sealant to install.
Awesome delivery.
They were very close to the ones I had on the camper. Was adding a. second set of light because of the biked covering a portion of the existing lights.
It fits, works, and looks great!
Fast and correct very
Will @ customer service was helpful when asked about the wiring configuration, despite the main server bring down. He jumped on Google and found the information.
Fit perfectly and is obviously brighter than the original. Ended up replacing both sides to make them look nicer.
Just installed my new rear tailer light that closely matched my OEM in size, shape, and the mounting holes lined up exactly as the OEM. I could not get an OEM form Northwood any more so the dealer found this one on etrailer for me and it's probably an updated dated version of my original, but it's better than the original because it has a rubber seal on the back so it seals better, and it's brighter too. I only needed to replace one light because for some reason all of the LED's were not illuminating so I only order one light but because the replacement from etrailer is better I just ordered a second one so it matches better and the performance of the lighting is better too.
perfect match perfect fit!
RECEIVED PART IN GOOD CONDITION AND IN A TIMELY MANNER.
THANK YOU FOR THE GREAT SERVICE..
Fast delivery and exactly as described. Couldn't be more satisfied. Thanks again
Great service and quick delivery
Looks like a good product--appreciate the quick delivery as promised
The product is everything you said it would be, thank you very much for the fast turn around.
James
8/4/2023
The LED lights have held up so far with no leaks after a year in Ohio
They are working great!! Very satisfied !!
Easy to install and works well.
Works ok
Love the sealed design. Fit perfectly!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jack 3.
10/10/2023
after a year, both lights still working and the units have not cracked as the originals did. Better looking units than the originals!!