LED Trailer Tail Light with Reflector - Stop, Turn, Tail - Red Lens - Passenger Side
(56 reviews)
Price: $47.27
In Stock
LED Trailer Tail Light with Reflector - Stop, Turn, Tail - Red Lens - Passenger Side
Item # 328-003-85
Retail:$53.08
Our Price: $47.27
You Save: 11%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (56)
- Q & A (0)
- Photos
Command Electronics Trailer Lights - 328-003-85
- Tail Lights
- Oval
- LED Light
- Red
- 9-1/2L x 4W Inch
- Surface Mount
- Rear Reflector
- Stop/Turn/Tail
- Non-Submersible Lights
- Command Electronics
9-1/2" x 4" Oval. LED Trailer tail light with 22 diodes provides stop, turn, tail, and rear reflex functions. Durable polycarbonate base. Surface mounts to passenger side of trailer - hardware not included. 3-Wire design.
Features:
- Oval LED trailer light works as a stop, turn, rear reflex, and tail light for passenger side applications
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base and acrylic lens
- Red lens with white LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - no cutout required
- Can be mounted horizontally or vertically
- Available chrome trim ring (sold separately) provides a finished look
- 3-Wire design
- White wire is the ground
- Brown wire is for the tail lights
- Red wire is for the stop and turn lights
- DOT and SAE compliant
- Meets FMVSS 108 requirements for automotive lighting
- Assembled in the USA
Specs:
- Configuration: passenger's side (right hand)
- Driver side: 328-003-85L (sold separately)
- Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep
- Diodes: 22
- Wire length: 7"
- 1-Year limited warranty
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
003-85 Command Electronics Combination LED Taillight - 22 Diodes - Surface Mount - Red Lens - Right Side
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- etrailer mistake
Customer Reviews
LED Trailer Tail Light with Reflector - Stop, Turn, Tail - Red Lens - Passenger Side - 328-003-85
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
9-1/2" x 4" Oval. LED Trailer tail light with 22 diodes provides stop, turn, tail, and rear reflex functions. Durable polycarbonate base. Surface mounts to passenger side of trailer - hardware not included. 3-Wire design.by: David05/01/2024
This light was a perfect replacement for the original light that had failed. Super easy installation.
by: Mark 03/09/2024
Just received my order they look great however I would have given them a 5 star if they would have included a gasket with the lights now what
by: Robert 12/30/2023
I of course have not install the lights since I just received them. Yet I will sat the ordering and shipping was outstanding. Ordered on Thursday and received them on Saturday. Thank you so much. Happy New Year!
by: Steven 07/21/2021
This light fit well but the mounting holes for the screws were too small. I was concerned that the screw might break the light, so I drilled the hole out. Works great
by: Don 09/15/2020
This is exactly what I hoped it would be. I needed a replacement light for my camper and this light is an exact replacement for the existing light. Piece of cake to install. My the camper lights are as good as new. Very happy with my purchase.
Don
9/16/2021
Still working perfectly. Installed this light a year ago and it still works and looks like brand new. I would definitely do it again.
by: Johan 08/16/2022
The tail light works as it should,the plastic is not as heavy as the original light but all the screw holes lined up with the original ones.
Once the light was installed everything looks and works good. Easy to install.
by: Mike11/29/2020
I just installed the led trailer lights it was fairly straight forward every function worked
great. I really apreciate the great instructions on the videos.The package arrived at my home in Canada in about 5 days which thought was quite fast.
by: Terry 10/09/2021
Great product and the installation went well! It would have helped if you included the gasket which was torn on the old light removal and included new screws which were rusted and stripped out on the old light. The hour allotted to the project turned into an afternoon of work trying to chase down screws and gasket!
by: Cheryl 08/08/2022
We are always happy with the customer service and the products we get from ETrailer.
by: Matt 07/17/2020
I got these to replace oem tail lights, these were exact match so installation was easy they work great.
by: Blake 08/03/2022
Perfect replacement for the original and has functioned flawlessly. Also fairly priced.
by: William07/18/2020
product was just what i ordered and worked great It was a little hard to navigate the shoping cart once an item is in the cart its hard to delete it or change it.
by: Tony09/10/2019
GOOD LED LIGHT. MATCHING ONE ON A BOX TRUCK.
QUICK SERVICE
by: Stanley 01/14/2022
Received identical part that needed to be replaced. We wired it in and mounted it and it is working Great!
We enjoyed working with emailed representatives. Thank you for helping us!
by: Michel09/20/2022
Awesome services, exactly like description, always knew where the package was... 100% satisfied
by: Dennis 09/27/2020
First one got lost in the mail. They immediately sent a replacement.
by: Dorina08/19/2022
great seller , product as described
by: John09/03/2021
The wires were a little difficult to get pushed back into the back of the RV, but, that is normal. It was a perfect match and has been working well...Thank you.
by: Jack08/22/2019
Exact replacement and easy to replace
by: Robert 01/21/2022
Robert
1/22/2023
Still works fine!
by: Michael05/20/2022
Excellent product. Very bright. I love it.
by: Paula08/31/2021
It was an exact match to our old one.
by: John 10/29/2021
Received all that ordered, staff helpful with the order. Easy to work with, i be back !!!
by: Rob 12/14/2021
Parts arrived quickly, exactly what I needed to get the RV back in great shape
by: Anne02/10/2024
25
56
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Replacement Option For LED Trailer Tail Light 328-003-85 w/ Broken LensI have a complete replacement option for you, but unfortunately the lens you are in need of has been discontinued by the manufacturer. Instead you'll need to replace your light completely with the LED Trailer Tail Light Passenger Side # 328-003-85, and if you need the driver side as well you'd need # 328-003-85L.
view full answer... - Can I Replace Bulbs Of Command Tail Light 328-003-85The LED Trailer Tail Light with Reflector - Stop, Turn, Tail - Red Lens - Passenger Side part # 328-003-85 does not have bulbs to replace. It is an LED trailer light so those parts are not replaceable. I recommend to make sure the light has a good ground to a clean metal surface on the trailer or to the main ground of the trailer. You also want to make sure the tail light has a good connection to the stop/turn signal wires on your trailer. If you have checked your connections and still...
view full answer... - How to Remove Lens From Command LED Trailer Tail Lights # 328-003-85L and # 328-003-85 The LED Trailer Tail Light w/ Reflector for the Drivers Side # 328-003-85L and Passenger Side # 328-003-85 have small notches on the lens that hold it in place. A Pick Set # PT76VR will allow you to get behind the lens to pry the lens off of the tabs as seen in the image below. If your lens was sealed in place you may be able to pull some of the sealant away from the lens with a sharp razor or scraper designed for sealants. If the sealant or adhesive was used to secure the lens to the...
view full answer...
- Dimensions of Command LED Trailer Tail Light 328-003-85Command LED Trailer Tail Light # 328-003-85 measures 9-1/2 long x 4 tall x 1-3/16 inches deep. You can refer to the linked video at the 1:50 mark to see these measurements.
view full answer... - Does The Chrome Trim Ring For Command Electronics Oval LED Trailer Light Fit On Driver's Side LED You are correct, the Chrome Trim Ring for Command Electronics Oval LED Trailer Tail Light # 328-89-378 is meant to fit the LED Trailer Tail Light with Reflector # 328-003-85 for the passenger side. The LED Trailer Tail Light w/ Reflector and Bracket # 328-89-378 for the driver's side, is not meant to be compatible with this trim ring. Additionally, # 328-89-378 does not come with hardware so you would need to provide hardware for installation.
view full answer... - Replacement Taillights for 2017 Forest River Forester MBSThe best option we have for a 2017 Forest River Forester MBS is the LED Trailer Tail Light part # 328-003-85L for driver side or part # 328-003-85 for passenger side. I was not able to reference the part number you provided but these taillights appear to be either the same or very similar to the taillights on your motorhome. I have attached a photo for you with measurements you can use to further determine compatibility.
view full answer...
- Can the Command Electrionics LED Trailer Tail Light Be Used On Either Side of the VehicleIt won't matter which side you use the LED Trailer Tail Light w/ Reflector and Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side # 328-003-85L or LED Trailer Tail Light with Reflector - Stop, Turn, Tail - Red Lens - Passenger Side # 328-003-85. The wiring on these won't be different and the only difference is that the "drivers" side has the license plate bracket. You can install these on either side of your Forest River RV.
view full answer... - Replacement Tail Light For a 2017 KZ Connect Travel Trailer CamperIt sounds like you are needing a replacement tail light for the left rear of your 2017 K-Z Connect travel trailer. If this is correct it would appear the LED Trailer Tail Light w/ Reflector and Bracket # 328-003-85L is the correct light for this model family of campers. Do be sure to check and compare this with your current lights as they may have been different for your specific model number or could have been changed out due to supply issues. We do also have the Passenger Side # 328-003-85...
view full answer... - Does Driver's Side Trailer Tail Light With License Plate Bracket Work On Passenger Side?The LED Trailer Tail Light w/ Reflector and Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side # 328-003-85L has the same functions as the passenger side # 328-003-85 with the exception of the license plate bracket and white lights that shine onto the license plate. You can alternate sides of the trailer without any issue. I only can confirm the measurements of the light for you to compare with your lights. They are 9-1/2" long x 4" tall x 1-3/16" deep with mounting holes...
view full answer...
- Replacement Tail Light Options For a 2020 Jayco North Point 5TH Wheel CamperThe Command Electronics Lights # 328-003-85 & # 328-003-85L are the closest lights we have to the lights on your 2020 Jayco North Point 5th wheel. These lights do not have the reverse light function so they only have 3 wires. If you wish to retain the reverse lights you can use 2 of the Dual LED Trailer Tail Lights # CE86FR. You will need a separate License Plate Mount # LPL56CB as these tail lights do not have the ability to also act as a license plate mount.
view full answer... - Will the Chrome Trim Ring Part # 328-89-378 Fit a 2018 Heartland Terry Classic V21The Chrome Trim Ring part # 328-89-378 is designed to be used with the LED Trailer Tail Light part # 328-003-85. If your light has the same dimensions and shape (including curvature) then the trim ring will more than likely work for you. Unfortunately, we have not yet tested this trim ring on the lights for a 2018 Heartland Terry Classic V21 so I would not be able to provide you with a definitive yes or no answer. If the trim ring does not fit then you can always return it and since it...
view full answer... - Replacement Trailer Tail Lights For a 2021 Forest River Rogue 32V Toy Hauler Travel TrailerWhile I cannot locate any exact replacement tail lights for your 2021 Forest River Vogue 32V you can replace both your tail lights. The LED Trailer Tail Light w/ Reflector and Bracket # 328-003-85L could be used on the driver's side while the LED Trailer Tail Light with Reflector # 328-003-85 will fit on the passenger's side. You can also contact your local Forest River dealer to see if they are able to order the correct lens from the manufacturer.
view full answer... - Replacement Trailer Taillights for 2021 Grand Design Transcend 221RBHey Les, I pulled up some pictures of your 2021 Grand Design Transcend 221RB and it looks like the taillights it has are the part # 328-003-85L and # 328-003-85.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steven
7/22/2022
Very well