To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
Average Customer Rating: 4.8 out of 5 stars (201 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.I really like Curt products and would usually give it a 4 or 5 star. However, the workmanship on this harness caused me problems. After attaching the harness and I tested the wiring, the driver’s side signal and brake lights would not work. After a bit of troubleshooting, I was able to determine that one of the kit’s wire splices (the yellow wire) was over-crimped and the wire was actually cut. The only thing holding it together was the insulation on the wire and the shrink tube insulation over the splice. I re-crimped the wire and it works fine. Not everyone would have the experience or tools to easily troubleshoot this one. It took me about an extra 20 to 30 minutes to diagnose and then figure out how to fix it. Also, thank goodness Curt has a Youtube video for installation. The included instructions were not helpful. They have even moved the ground wire to the signal light housing end of the harness. The included wiring diagram shows it coming from the black converter box.
The kit is good. Like another reviewer here, my harness had a loose connection that was only discovered post install, so required some trouble shooting and fixing of the loom itself. If not for that would be 5 stars.
We ordered the trailer receiver hitch and electric wiring harness for the trailer, everything was easy to install with the video support. Excellent service and components, definitely will order from etrailer again
The plug and play wiring is ideal. The hardest part is running a powered wire from the battery, but that's what gives lights full brightness.
Product arrived on time and packaged nicely. I have not yet installed but quality of product looks good and installation video was very good and it seems to be a fairly easy install.
Once you have the light connections together, the rest is easy and fast. Harness is well built and instructions are easy to follow.
High quality wiring kit. Has held up great after a year's use. Video very helpful with installation.
The part number is different and the year model listed on the package is not correct. But I'm assured it is the right part....I hope so
Brooke M.
4/2/2024
I saw this comment and wanted to double check the fitment for you. I looked on our fitguide and I also checked the the Curt website, and it says it is a match.
2021 Jeep GC 3.6 no factory tow package, this was an excellent option to add. Not being the 5.7 the 4 pole connector is perfect. Hardest thing is running the wires if you’re on your back on the garage floor. Lift would make this a 2 star difficulty but since I was on the floor it was a 3.5 out of 5 for difficulty. Grease isn’t needed if you use the butt shrink connectors like in the video, I also added the shrink wire sleeves over the connector (without a doubt it is weather proof doing this). Plugged in the tester and all worked as advertised. Highly recommend if you want to save money, my whole setup ran me under $xxx, Jeep dealer wanted close to $xK for hitch/7 pole/labor. I recommend to everyone if you’re towing a trailer with lights and no brake setup.
Way to install. Plus the installation video made the job that much easier!! The customer service was professional and prompt. I highly recommend etrailers.com for all your trailer needs and accessories
The product is just what I needed and works great. The best part, though, was the installation video. Spot on - just had my phone out and played it as I installed it. Exceptional quality without a minor step skipped. Etrailer has my loyalty because of the things like that.
Brad
5/16/2023
Not great - just after being installed for a year and used monthly I found the connector and cover melted and the ground wire fried. Curt suspects some kind of short and told me it’s likely somewhere along the route from the battery fuse was broken. Not a warranty issue so I’m out $ for a new one and all the time spent running the wires. I followed the e-trailer video step by step as my original review shows. Maybe this isn’t a product issue but it’s still frustrating.
Perfect fit, easy install, works great. Pulled a u-haul trailer about 3000 mi on freeways, in cities, on small roads and on gravel roads to campsites - worked perfectly.
Worked good. Didn't think it did at first but ended up being the ground on the trailer lights!
Easy and simple to put on
Great product
Fit great, easy to install, easy to follow instructions
Good product, and video installation a great help, tough to route without a lift. I am a senior and not as limber.
Worked perfectly. Everything needed to connect my 21 Jeep GC to the hitch was included.
Works great wires could of been a little longer from the taillight to the black box
Very easy to install. Pull my jeep up on ramps to have more room under the jeep to run the wire to the battery. Instructions and video on your website were very useful.
Although the free shipping gave me the same date as 2 & 3 day shipping then changed the next day, customer service was excellent and I got my parts and installed same day using the excellent videos.
My only advice is to connect the long wire that goes to the engine compartment to the tail harness before you install the tail harness. If you have dual exhaust, it's a PITA to get your hand up there to crimp the connector.
Easy to install. I just wish it came with better zip ties
Pretty easy to wire up. Pretty much plug and play. Hardest part was to run the positive wire all the way up to the battery.
The wiring harness was easy to install by instructions, fit my vehicle precisely and works exactly as intended. Great purchase and good experience all around!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
9/8/2023
Still working just like the day it was installed