Recommended Wiring Harness for 2021 Jeep Grand Cherokee Without Factory Tow Package.

Question

Question:

I am looking for a wiring harness for my 2021 Jeep Grand Cherokee, it does not have the factory tow package. What would you recommend?

asked by: Jason S

0

Expert Reply:

The wiring harness I recommend for your 2021 Jeep Grand Cherokee is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118727. The # 118727 will provide the wiring you need to connect to your battery to give you the power you need without the factory tow package.

I recommend the T-One because of the continued success our customers have had with this wiring harness.

expert reply by: Thomas M

0

Answer 1

The pin-end of the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat #C62VR where your trailer plugs into your 2019 Jeep Grand Cherokee is often connected on the outside of the vehicle so it is accessible by the hitch receiver. However, if you…

view full answer...

Answer 2

Though it is perfectly fine to use the Curt #C62VR even if your 2018 Jeep Grand Cherokee has the factory towing package, I don't necessarily recommend it. Reason being, if your vehicle was set up with that package, it will have wires run that are…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...