Trailer Wiring Harness For A 2022 Dodge Durango
Question:
Good morning are this connections just a plug and work or do l have to run a wire up to battery
asked by: Jeff S
Expert Reply:
Though The Curt T-Connector Vehicle Wiring Harness # C62VR is not confirmed for your 2022 Dodge Durango I have the correct wiring harness for you!
The T-One Vehicle Wiring Harness # 118617 will plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will need to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, you will need to run the hot lead up to your car's battery. Connect the lead to the included fuse holder, and then connect to fuse holder to the positive terminal on your battery and insert the provided fuse. All custom harnesses will have to be ran to the battery.
Once installation is complete the 4-flat connector will be stowed beneath your vehicle, near the trailer hitch. The Mounting Bracket # 18144 (sold separately) is recommended to keep the connector secure. It is also recommended that you use a small amount of grease # 11755 on all electrical connections. The plugs on your Durango and the 4-pole connector itself, doing this will help prevent corrosion.
I attached an installation video link below.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Are 1/2-20 Lug Nuts Able To Be Used On M12-1.5" Wheel Studs?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Curt T-Connector Wiring Harness Taillight Connectors On a 2021 Jeep Grand Cherokee
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Bearing and Seal Kit for 2004 Kendon Motorcycle Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Studs for RVD-H-865 7k Hub/Drum
- Q&A: Is EcoHitch Invisi Hitch Receiver Available for a 2023 Subaru WRX
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Correct Replacement for Kwikee Step Motor 369545
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Maintenance Schedule