Curt 4-Way Flat Trailer Connector w/ 60" Harness and Mounting Bracket
(51 reviews)
Price: $11.48
In Stock
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Mounting Bracket
Item # C58345
Retail:$23.17
Our Price: $11.48
You Save: 50%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (51)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C58345
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- CURT
- 5 Feet Long
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wire configuration below)
- Attaches to your hitch with included mounting bracket and hardware
- Includes durable, molded-molded, standard female output socket
Specs:
- Harness length: 60"
- Bracket dimensions: 1-3/4" tall x 2-3/4" long
- Bolt hole spacing: 1-3/4" center to center
- Maximum amperage: 7.5 amps per circuit
- Wire gauge: 16
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-spices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a ring terminal (sold separately) and the the included self-tapping screw.
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Easily Mount Connector with Included Bracket
The included mounting bracket can be installed on your hitch or attached to another bracket (sold separately) that mounts under your bumper with the included hardware. Once you've installed the mounting bracket, take the dust cap off the connector. Slide the connector into the mounting bracket until you feel it click into place. Pop the dust cap back on, and you're good to go.
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
58345 Curt Vehicle Wiring Harness with Vehicle End 4-Pole Connector and Mounting Kit - 5' Long
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Mounting Bracket - C58345
Average Customer Rating: 4.8 out of 5 stars (51 Customer Reviews)
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.by: James03/25/2024
I was surprised and disappointed it did not come with a rubber plug cover to protect new terminals, really happy with it besides that,would have given it 5 stars if it had the cover.
by: Michael07/08/2023
This connector worked fine. No instructions.
Just remember. The standard connection is:
Yellow = left blinker
Green = right blinker
Brown = brake
White = ground
No problem to attach as I had both a schematic for my vehicle ( so I knew which wires to look for) as well as a 6/12v testing light. With these, the connections were easy.
by: James04/28/2023
I think the hitch will be ok, but I expected the wiring harness to be better. I was looking for one that was tailored to my 2020 Ford Transit T250 and with instructions.
by: Joshua- JT Home Improvements11/04/2022
Needed a fast any easy replacement for my trailer wiring for my business and etrailer got it to me within a few days will definitely continue doing business with them thanks again!
by: Danny 06/28/2022
Sometimes all you need is a simple bracket to hold a connection, instead of having a cable hang down...and this works perfect. I wanted something basic on my S10 that I could mount underneath to the bumper, next to my receiver hitch, to plug my PWC trailer connection into. I had no need for those large 7-way units (nor the space)...WORKED PERFECT!
by: Joseph 07/27/2023
Good kit. Will install this weekend.
by: Sarmad11/14/2022
Installation was easy and straight forward. It works well.
by: Joshua06/05/2020
Seriously amazing product... I spent more time installing my trailer gate on the trailer than I did installing the wiring harness on my vehicle!! The instructions were clear, and installation was FLAWLESS!!!
by: Jill03/04/2022
Works as described. Easy to follow installation instructions.
by: Perry03/01/2019
Perfect. I've never seen a trailer plug like this. It saves me from dragging my old plug on the ground occasionally
by: Taz Moto04/24/2022
Nice design, but the wires need to be about a foot or so longer for a Jeep Grand Cherokee.
by: Dave 05/04/2021
NO PROBLEMS WORKS GREAT EASY INSTALL
by: David 02/08/2021
Very easy to hook up and works perfectl y.
by: Larry07/16/2019
They always have what I’m looking for and delivery is always on time.
by: Robert05/31/2019
Item and Service was Great!
Thank you.
by: Paul01/07/2019
I was very happy with everything and would recommend this company to everyone
by: Jamie06/28/2021
Install was easy and item performs grea t.
by: Jared07/22/2020
good quality installed very easy.
by: Isabella12/28/2021
Nice quality, good price
by: Quentin05/13/2020
Products were as listed - great quality and as always fast service!
by: Rosemary 05/08/2021
Easy install, 15min and you're done.
by: Ivan03/16/2018
Great, prompt service. Would shop here again.
by: Tom w06/12/2019
Exactly what I needed!
by: Carville05/08/2019
Very quick shipping and items exactly as described.
Thank You!
25
51
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- How to Wire 3rd Stop Lamp in Camper Shell on 2021 Ford RangerThe # C58345 4 pole trailer wiring harness wouldn't be a good option, as the brake lamps and turn signals are carried on the same circuit. If you installed it that way, your 3rd brake lamp would blink along with the turn signal as well as illuminating with the brake pedal. There are a few ways to do this. The easiest way to do this would be to pull the 3rd brake lamp housing out of the rear of the cab and use a circuit tester like # PTW2993 to find which wire carries the brake lamp signal,...
view full answer... - Recommended Trailer Hitch and Wiring for 1965 International TravelallSince there is no custom-fit hitch for your 1965 International Travelall, you will want to go with a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. The # C14082 is not confirmed to fit your vehicle. The Draw-Tite hitch has a 2" receiver and fits vehicle frames up to 44". This is a weld-on hitch so we recommend taking it to a certified welder for installation. For wiring you can use the # C58345 which also comes with a mounting bracket. If...
view full answer... - What All is Needed to Add an EZ Connector to a 2012 Expedition and Trailer?Switching over to the EZ Connector Magnetic 7-Way # 319-R7-01 will lose the 4 flat connection. However, I do have a couple solutions for you. First will be the Trailer Connector Adapter # 319-R7-54. This will adapt a standard 4 flat to work with the # 319-R7-01. If you preferred to keep a 4 flat plug, it will be a little more complicated, but not overly so. To do this, you will need to splice a 4 flat, like the Curt # C58345, either into the # 319-R7-01 at some point, or where the #...
view full answer...
- Trailer Brake Controller And Wire Harness For 2003 BMW X5I recommend the Curt Echo Wireless Trailer Brake Controller # C51180 it is set up as fast as you can plug it into your vehicle and trailer ends. Then you control it via Bluetooth from an app on your mobile device. The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # RED44FR is a great choice for a brake controller if you want actual hardware and a knob to use instead of your mobile device. Your 2003 BMW X5 has many options for trailer brake controllers and...
view full answer... - Can I Use Both The 7-Way and 4-Way At The Same Time?I have a solution for you, but you won't be able to use both the 7 way and 4 way plugs on the Hopkins # HM40975-11998 at the same time because the cover flaps do not allow for both to be open simultaneously. In order to plug both your 7 way and 4 way into the same plug you would need to use the Curt Trailer Connector Adapter # C57672 , which has the plugs side by side with dust caps that flip up to allow you to connect your plugs as desired. If you don't already have a wiring harness...
view full answer... - Length of Wire on Curt 4-Pole # C58345 Trailer Wiring HarnessThe wiring harness you mentioned, part # C58345 is 60 inches or 5 feet long. Rather than using the quick connectors provided with the kit I'd recommend soldering the connections and sealing the connection with heat shrink tubing like # DW05452. If you don't solder, we carry heat shrink butt connectors that are almost as good, part # DW05744-5
view full answer... - How To Add a Trailer Hitch To a 5th Wheel Trailer to Pull a Boat TrailerThe Adjustable Width Trailer Hitch Receiver part # C13703 is what I recommend installing on a fifth wheel trailer due to its universal nature that allows it to be installed on pretty much any trailer. The Adjustable Width Trailer Hitch Receiver provides a 3,500 lb gross trailer weight capacity which would be around the limit. In regards to installation, the process is pretty straight forward and you can use the included brackets as your template for drilling. In order to provide lights...
view full answer... - Correct Trailer Wiring Harness for 2006 Scion xBThe Curt T-Connector Vehicle Wiring Harness # C56030 that you mentioned is the correct custom harness for your 2006 Scion xB. From what I could find, your vehicle's factory wiring system should have the brake and turn signals sent along separate circuits. This Curt harness includes a converter to combine these two circuits so that they're compatible with standard trailer wiring (which has the brake and turn signals sent along the same wire for each side). I'm not quite sure what you mean...
view full answer... - Recommended Trailer Hitch For A 2012 Open Range Light 297RLS Hey Ivan, Yes, this is a pretty common request for trailer owners that also want to haul their boat, golf cart, ATV, etc. so they add a trailer hitch and tow a second trailer. This is called triple towing and can be dangerous because you're adding more length and a second pivot point so there are laws and restrictions on triple towing that you'll want to research before attempting it. Usually the state and local municipalities you'll be driving through will need to be checked. I don't...
view full answer... - Curt 4-Pole Flat Universal Vehicle Wiring Harness Wiring SizeThe Curt 4-Pole Flat Vehicle Wiring Harness # C58345 is constructed with bonded 16-gauge wires and durable molded rubber insulation. This kit is specifically designed for vehicles that have a 2-wire taillight system. This means that power for the turn signal and brake light are shared by the same wire on your vehicle. A No-Drill Mount for Electrical Mounting Bracket # 18140 can be used to allow you to fasten the wiring to your receiver.
view full answer... - 7-Way Wiring Harness For a 2021 Mercedes-Benz GLETo add a 7-way to your 2021 Mercedes-Benz GLE, you'll just need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This kit will utilize an existing 4-way wiring harness and add-on the 7-way trailer connector. If you do not have a 4-pole already, then you can add one using the Curt 4-Pole Flat Vehicle Wiring Harness w/ Mounting Bracket # C58345.
view full answer... - Connecting Ignition Switched Power From 2015 Toyota Prius v to Enclosed TrailerYou will need to use a circuit tester like # PTW2979 to find a wire in your 2015 Toyota Prius v that is hot only when you use your key (ignition switched power). When you do that you can simply wire in the Battery Isolation Solenoid # PK5231201, which should be wired like in the accompanying diagram with 10 gauge wire # 10-1-1. I have added a link to a video review of the solenoid for you to check out.
view full answer...
- Will The Curt C13294 Fit My 2016 Mercedes GLE 450 AMG Coupe HitchYes the Curt trailer hitch receiver # C13294 will fit your 2016 Mercedes-Benz GLE. If you are going to haul a trailer you will also need a ball mount like the Curt class III # C45036 ,2 inch ball included. As well as a wire harness to power trailer lights, like the Curt 4-Pole Flat Vehicle Wiring Harness mounting bracket included. # C58345. If the trailer you are towing has electric brakes it will need a different harness like the Universal Wiring Harness with Brake Controller Harness...
view full answer... - Available Vehicle and Trailer Wiring ConnectorsI cannot recommend custom-fit trailer wiring for your vehicles without knowing their year, make, model and version but I can help you with basic 4-pole type connectors for both the vehicle and trailer. I linked pages for both types of connectors. For a trailer side 4-pole you can wire in to your trailer we have items like # W787274 and # 54000-026. For a vehicle side 4-pole we have # 18252 and # C58345 which includes a bracket. For a bracket only use # 18144. I also linked a helpful article...
view full answer... - Can I Install A Trailer Hitch On My 2003 BMW X5?Yes, the two trailer hitches we carry that will fit to your 2003 BMW X5 are the Curt Trailer Hitch Receiver # C13162 and the Draw-Tite Max-Frame trailer hitch receiver # 75492. I recommend the Draw-Tite hitch it will be easier to install I have a link to the installation of the Draw-Tite hitch. If this is for towing trailers you will need a wire harness like the Curt 4-Pole vehicle wiring harness with mounting bracket # C58345 and a hitch ball mount and ball like the Curt Towing Starter...
view full answer... - Recommended Trailer Connector for 2020 GMC Sierra 1500I'd recommend the # HM40975 which would provide both a 4-pole and a 7-way connector. This is what GM uses as the OEM trailer connector. The HM40975 would plug into the round US car connector that is plugged into the knockout next to the license plate. remove the knockout, unplug the socket from the rear of the knockout and plug the connector into the socket on the back of the # HM40975. The connector I recommended includes the mounting bracket and mounting screws, although your truck should...
view full answer...
- How to Power Lightbar Without Plugging Into Factory Tow PackageThat is correct! Splicing straight into the tail light wiring is the only way to power a lightbar like # BLS-1103 without making your truck think the lightbar is a trailer. The tow package port in the rear only disables the rear features because it thinks you are towing a trailer. By getting your power from the lights themselves and leaving the factory port open, then it will be business as usual with all your safety features like the camera, sensors, etc. Carla gave great advice with...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Sabrina W
Written by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
4/28/2023
This harness is to be hardwired in. So, you shouldnt have any issues with fit.