bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 2 Inch
  6. Rise - 0 Inch
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs

Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs

Item # C45134
Retail:$55.24
Our Price: $37.53
You Save: 32%
Trailer Hitch Ball Mount
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
7-1/2" Long ball mount features a permanently welded hitch ball that cannot be stolen or loosened. 2" Diameter hitch ball is chrome plated. Pin and clip included. Ball mount can be used in the drop position only. Fits 2" hitches. Great Prices for the best trailer hitch ball mount from CURT. Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs part number C45134 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (419)
  • Q & A (0)
  • Photos

CURT Trailer Hitch Ball Mount - C45134

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 2 Inch
  • Rise - 0 Inch
  • 2 Inch Ball
  • One Ball
  • 7500 lbs GTW
  • Class III
  • CURT
  • Steel Shank - Gloss Black
  • Steel Ball

7-1/2" Long ball mount features a permanently welded hitch ball that cannot be stolen or loosened. 2" Diameter hitch ball is chrome plated. Pin and clip included. Ball mount can be used in the drop position only. Fits 2" hitches.


Features:

  • Ball mount with permanently attached ball lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Hitch ball provides connection point for your trailer's coupler
  • Hitch ball is welded to ball mount platform - no need to torque
    • Prevents theft of the hitch ball
    • Eliminates loosening of the hitch ball for a strong and secure towing setup
  • Sturdy steel construction with rust-resistant finishes
    • Black powder coat finish on ball mount
    • Chrome-plated hitch ball
  • Pin and clip included - hitch lock sold separately


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 7,500 lbs
  • Tongue weight: 750 lbs
  • Ball size: 2"
  • Length: 7-1/2" from center of hitch pin hole to center of ball
  • Drop: 2-1/4" from top of inside of hitch opening
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

45134 Curt Loaded Ball Mount w/ Welded Ball - 2" Square Ball Mount with 2" Chrome Hitch Ball - 2-1/4" Drop





Customer Satisfaction Score:


Customer Reviews

Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs - C45134

Average Customer Rating:  4.9 out of 5 stars   (419 Customer Reviews)

7-1/2" Long ball mount features a permanently welded hitch ball that cannot be stolen or loosened. 2" Diameter hitch ball is chrome plated. Pin and clip included. Ball mount can be used in the drop position only. Fits 2" hitches.

by:

Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.



by:

I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem.

A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.

Ian B.

2/19/2021

Works just as well as it did then.



by:

The ball on this hitch is not spherical. If you clamp it into a trailer hitch, it rattles up and down (though not side-to-side). Other ball hitches in my arsenal (from different tow vehicles) are held snugly and don't rattle in any direction. Although not a safety issue, I don't like hearing the rattle on bumpy roads.

Katrina B.

11/1/2022

If you are having issues with rattling, we recommend using an anti-rattle hitch lock like part # 63232. You can contact our customer service department to get this purchased.



by:

Works fine, but it's a little loose in the receiver which makes it annoyingly loud at times. It will rattle up and down particularly when pulling a trailer with a light load or low tongue weight. It's bad enough I've tried shimming it which did help. Functionally it's fine. It's just annoying.



by:

Easy to use, easy to store, all in one.

Sal C.

3/22/2021

excellent, no problems, easy to use



by:

This hitch works great and was extremely easy to install! Thanks to the instructional videos it took me alone about 2 hours and I saved myself a few hundred dollars. I would highly recommend the hitch and etrailer!



by:

I've ordered several things from etrailer and they always fit as expected and arrive in good shape. Thanks



by:

Everything I run is 2inch so why not just buy this? I have a locking hitch pin so this only lessens something someone can steal now. Shipping was quick as always! No complaints!



by:

Just installed today, quality and finish look good, price was good. Etrailer was unbelievably fast, received this in less than 24 hours. Awesome stuff!

David R.

1/27/2020

Still very satisfied, hitch still looks good, has pulled everything I hooked it up to. I will buy all my hitches from e-trailer in the future.



by:

I only use welded ball hitches; do not want to worry about the ball coming loose. For every drop height Curt makes this item. Also replaced bashed up connector mounts, wires and trailer connectors at this website. Will shop here in the future.

Mark L.

4/28/2018

The hitch re-wiring job is holding up great. I also installed a pendilum type brake controller which works well also. Towing a trailer with this equipment is reliable and safe.



by:

Works fine, maybe a bit too long of a drop for a 2022 Highlander Hybrid



by:

I wasn't aware that the ball was welded to the mount. I wouldn't have purchased it had I looked closer at the pictures before ordering. Otherwise nice curt product as usual.



by:

I have used this ball mount hauling my snowmobile trailer and boat trailer. No problems and very satisfied. The 7500 LB load capacity was the biggest selling feature. It covers my snowmobile trailer 7000 GVW. There is no other product out there that matches the quality and load capacity of this product.



by:

used it right away and worked great



by:

This ball mount is excellent quality. Shipping was fast and price was good. If you are like me and dont plan on switching balls out on your hitch then this is the way to go. Highly recommend.



by:

Super clean and easy. No shaft and nut means it easier to stow.



by:

I only used the trailer hitch a couple of times and then sold the boat. The hitch worked fine !!



by:

Looks like a quality product. I had ordered a 2 1/4" drop receiver and ball and received a 2" drop, but whatever.



by:

what can I say, this part is exactly what I needed and it fit perfectly in my truck and my small trailer. And they had very fast delivery. I am 100% satisfied and we recommend the seller to anyone. Happy trailering



by:

Worked well for my towing needs.



by:



by:

Heavy duty working well for my trailer.



by:

Outstanding speed of delivery! I was expecting 5 biz days and everything arrived 24 hours later! Wow! Packaging was rather damaged but that was down to the shippers not etrailer. Top quality product and very easy to install.



by:

Great I like that the ball is welded on. It makes it look clean.



by:

Excellent construction. Heavy and solid, as it should be. Welded ball means no concerns of proper torque on a nut.


25
466
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount

  • Is There A Curt Fusion Ball Mount Available With a 2-5/16" Hitch Ball?
    I do have an option for you as the Curt Fusion only offers ball mounts with a 2" Ball # C45134 or 1-7/8" hitch ball # C45131. The Curt Solid 2-Ball Mount # C45002 is a straight shank design with a 2" and 2-5/16" hitch ball welded in place like the Curt Fusion.
    view full answer...
  • 2" Ball Mount with 2" Drop, 2" Hitch Ball and Receiver Pin and Clip Made in The USA
    While the Curt Fusion Ball Mount # C45134 is made in China we do have their similar Curt Solid Ball Mount # C45312 that is made in the USA. You will need the 2" Hitch Ball # CB26C and Gen-Y Hitch Pin and Clip # 325-GH-096 to have all the parts made in the USA.
    view full answer...
  • Is the Curt Fusion Ball Mount Welded or One Piece and Will It Hold Up to the Rigors of Towing
    I can assure you that Curt makes some of the most durable products on the market and these types of parts undergo rigorous testing during the product development stages, so it's been heavily tested in towing conditions and has proven to withstand all that can be thrown at it. Additionally, the Curt Fusion Ball Mount # C45134 has a lifetime limited warranty against defects and malfunction, which tells me that they're confident this will hold up for as long as you want to tow with it.
    view full answer...
  • Can My 4 Cylinder 2011 Equinox Tow a 1,500 Pound Trailer?
    From what I could find, the 4 cylinder options of 2011 Chevrolet Equinox are rated to tow 1,500 pounds at the maximum. This can be verified by checking the inside door jamb on the driver door. There will be a label/sticker with all the capacities your vehicle can handle. As long as it confirms you can pull 1,500 pounds, you will be good to go. However, I will say that you should watch the weight when fully loaded to make sure you do not exceed your max capacity. With that being said, the...
    view full answer...
  • Parts Needed To Tow The Low Bed Micro Sport Trailer With A 2018 Toyota 4Runner With A 2" Hitch
    To be able to tow the Malone LowBed MicroSport Trailer # MPG464-LB with your 2018 Toyota 4Runner, you're just going to need a ball mount like the Curt Fusion Ball Mount for 2" Hitches # C45134 with a 2" hitch ball. To choose a correct ball mount will dictate on the measurement from the ground to the top of the trailer receiver, if it is less that 18" you'll need a ball mount with rise, however, if it's more than 18", you'll need a ball mount with drop. For example, if you measured 20"...
    view full answer...
  • Parts Needed for 2001 Jeep Grand Cherokee 4.0 liter to Tow 4,000 lb Trailer
    I looked up the towing capacity of your 2001 Jeep Grand Cherokee 4.0 liter and it can tow up to 5,000 lbs. So a 4,000 lb trailer wouldn't be a problem at all. So for a hitch the Draw Tite part # 75139 would be a great option. It installs easily and has more than enough capacity. Then for trailer wiring the Tekonsha part # 118369 is very reliable and installs easily. Then for a ball mount with a 2 inch ball you'd need the part # C45134 and you'd be set.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Clayton O
Installed by:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924