Curt Adjustable Weight Distribution Shank - 8"
(39 reviews)
Price: $147.69
In Stock
Curt Adjustable Weight Distribution Shank - 8"
Item # C17100
Retail:$168.95
Our Price: $147.69
You Save: $21.26
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (39)
- Q & A (0)
- Photos
CURT Accessories and Parts - C17100
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- CURT
- 1500 lbs TW
- Round - 7 Inch Rise
- Trunnion - 6 Inch Rise
- 15000 lbs GTW
This shank offers both rise and drop positions. It measures 8" from the hitch pin hole to the bolt holes. 7 Bolt holes let you adjust the height of your weight distribution system. Powder coated steel resists corrosion.
Features:
- Shank slides into your hitch receiver and provides the attachment point for your weight distribution system's head assembly
- Designed for use with Curt weight distribution systems
- 7 Adjustment points for attaching the head assembly
- Lets you level your trailer with your tow vehicle
- Drop or rise positions available to fit your application
- Black powder coated steel resists rust and corrosion
Specs:
- Application: 2" x 2" trailer hitch receivers
- Weight capacity: 15,000 lbs
- Tongue weight: 1,500 lbs
- Overall shank height: 9-1/2"
- Holes are spaced 1-1/4" apart on center
- Maximum drop:
- Round bar system: 3"
- Trunnion bar system: 2"
- Maximum rise:
- Round bar system: 7-1/2"
- Trunnion bar system: 6-1/2"
- Distance from center of shank pin hole to back of adjustment shank: 7"
- Distance from center of adjustment holes to center of shank pin hole: 8"
- Distance from front of shank to center of shank pin hole: 9"
17100 Curt Adjustable Weight Distribution Shank
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Curt Adjustable Weight Distribution Shank - 8" - C17100
Average Customer Rating: 4.9 out of 5 stars (39 Customer Reviews)
This shank offers both rise and drop positions. It measures 8" from the hitch pin hole to the bolt holes. 7 Bolt holes let you adjust the height of your weight distribution system. Powder coated steel resists corrosion.by: Rich 04/14/2024
Most reciever arms don't have enough options. Either to much lift or to much drop. CURT products are moderate and are a great value.
by: Robert 03/26/2024
Looks to be very sturdy and perfect fit for my setup
by: James 05/10/2023
This fits my receiver perfectly and now my trailer is at the right height. I would recommend this product.
by: Russell05/04/2022
Quick shipping on an item that was exactly as described.
by: Michael 07/24/2020
This solved my problem. The Reese hitch bar that came with my load distribution hitch did not have the holes I needed to have my travel trailer line up with my ball mount. I used C17100 in the up position and I needed the holes near the bend to have my truck ball one inch higher than my trailer coupler. With the hitch bar that came with the 6000 lb Reese , in the up position and the lowest setting my ball was 4 inches higher than coupler. In the down position my ball was lower than my coupler.
by: captain06/17/2013
I have the Pro Series Weight Distribution System w Friction Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW product PS49903. I pull a 5000# haulmark race trailer 24' with my 2012 ram 1500. I got the weight distribution system and it was great, but according to the instructions, I could not get my hitch ball to 21" at the lowest. So the ride has been ok but I id prefer the ball to be at 21", currently at 22" so I ordered this shank. It has the lowest holes that I could find, however only appears to drop the ball about 1/2". Probably not worth it for 1/2", but I care a lot about my cargo so I thought I would give it a shot. Mind you I have not installed it yet, just put it up next to my current shank and it looks like it would drop the ball1/2"
by: Les 05/12/2023
shank was exactly as describe, ordering was easy and arrived quickly.
by: Larry H02/08/2019
The product appears to be exactly what I needed. It arrived yesterday and I will switch out from my old hitch shank tomorrow. My old part was used on a taller truck that I traded off and just made the hitch ball too low. This product is definitely heavy duty. Thank you etrailer.com.
by: Jeff S.03/25/2018
I needed a different rise Shank for my new RV than the one I had and the Curt 8" fell perfectly into the range I needed.
The shank is solid steel and heavy and the holes look to be precision machined. Welds look hand done as there is a little sloppiness with some of them but nothing structurally detracting.
You can use this shank in the up or down position so the description that only gives a small amount of drop or rise is a bit misleading. Just know that the max dimension will work for the up or down position.
Powder coating looks good but I do't expect it to last as most of the paint on these things get scratched up in use.
by: Steven 04/26/2023
It’s exactly what I wanted and it came a day earlier great job
by: Jonathan10/08/2018
Very happy with all products purchased for this set up. Dealt with Crystal ( aka CK!). She was extremely knowledgeable on all our product needs. She kept me as a customer and resolved some issues I was having with a prior purpose. Great product and great job to Crystal.
Thank you
by: Mike Kax08/03/2017
Perfect height adjustability for my stock, not lifted 2017 Tundra.
And if I do a conservative 4" lift on 33" tires...The hitch Will still work
by: Dave08/15/2017
I have not received the shank yet, it is at the border. When I pick up my shank and equalizer hitch and have it set up I will gladly review both products.
by: SG08/29/2020
Product was exactly as advertised and delivered very quickly. I needed something that would allow adjustments on my hitch and this fits perfectly.
by: Tom 02/07/2020
Got exactly what I ordered! Fast shipping and the website is easy to navigate. With my new truck the old shank even with a shim was sloppy fitting. This one is made for my 2019 and sits nice.
by: Rogan08/15/2022
Been working great as it should! Good adjustability. Thanks!
by: Jim S07/10/2017
Just what the 'doctor' ordered ... Fits well, gives me the adjust-ability to allow use on several different vehicles ... Good quality materials ...
by: John M.05/31/2012
I was very pleased with the ordering process; I was notified when the order was received and when the product was shipped. The product was received in great condition and was exactly what I ordered.
by: Dale05/31/2022
Adam E was very helpful. He had information that help confirm the correct part numbers. His response with processing the purchase was quick. Will order again soon.
by: Michael 02/23/2020
Good product, worked as intended. Would purchase again without question
by: AJ06/11/2017
Product works well.... well built
by: Kevin05/01/2018
I am very very pleased with it I like the way the quality is on it it looks very heavy duty to pair to my old one
by: Michael12/21/2018
It fit perfect No complaints
by: Daniel 11/08/2021
Exactly what I needed.
by: Super fitment 12/05/2016
Well put together. Heavy duty product d elivers.
25
39
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Replacement Parts for Curt Curt TruTrack Weight Distribution SystemWe can definitely help you get the right parts for your Curt TruTrack Weight Distribution System w/ Sway Control # C17501. We have the following available: -Replacement L-Pins and Clips for Curt TruTrack Weight Distribution System w/ Sway Control - Qty 2 # C17513 -Curt Weight Distribution Head Angle Adjustment # 17312 -Replacement Hardware Kit for Curt TruTrack Weight Distribution System w/ Sway Control - 15,000 lbs # C17554 -Replacement Spring Bar Lift Tool for Curt TruTrack Weight...
view full answer... - Lowering 2 Inch Trailer Hitch Receiver when Using a Motorcycle RackFirst you need to know that the use of an adapter to extend, reduce, raise, or lower the receiver will reduce the tongue weight capacity by 50 percent. So if the motorcycle rack you have is completely supported by the trailer hitch then the combined weight of it and the bike cannot exceed the reduced tongue weight capacity. So for example if the combined weight of the carrier and bike is 350 pounds then the hitch would have to have a tongue weight capacity of at least 700 pounds. In this...
view full answer... - How to Adapt Older 1980s EAZ-Lift Weight Distribution System for New Dodge Ram 3500Manufacturers of weight distribution systems do not test their products or parts with those from other makers so I cannot assure you that the set of spring bars you have from your 1980s system will fit into a head assembly from another maker. We do offer bolt-together WD shanks like # C17100 from Curt but this mixing of parts is not advisable for safety reasons as the resulting capacity would be unknown. Since you have had good use from your old system I suggest you choose a new WD system...
view full answer... - Troubleshooting Height Adjustment for Reese Weight Distribution SystemThe Reese Weight Distribution System w Shank - Round Bar - 6,000 lbs GTW, 600 lbs TW # RE34FR is 49911 you referenced. It definitely doesn't sound right that there is more than 4 inches of difference from the base of the hitch ball when inverting your weight distribution shank with closest settings. I'm attaching an article to assist. If you need something that allows more of that middle adjustment, I recommend the Curt Adjustable Weight Distribution Shank - 8" # C17100.
view full answer... - Weight Distribution Shank for Curt System and 2-1/2" Receiver on a 2018 Ford F-250We actually do have a variety of WD shanks that will work with your Curt WD system and the 2-1/2" receiver on your 2018 Ford F-250. I recommend the Curt # C17131 because of how close it is to the size of the Curt # C17100 that you referenced. I have attached a link to our selection of WD shanks that are compatible with 2-1/2" receivers for you to check out as well. These actually all have the same dimensions and hole sizes for the adjustable bolt holes so most shanks are interchangeable...
view full answer... - What Weight Distribution System Is Right for My 2011 Toyota Tundra?The spacing from the the center of the top hole to the top of the shank is 1-1/4", and the measurement from the center of the third hole to the bottom of the shank is 8-1/4". The other measurements for the Curt Adjustable Weight Distribution Shank # C17100 are 9-1/2" for an overall length, 3" from the center of the hitch pin hole to the edge of the shank, 9" from the center of the hitch pin hole to the outside edge of the shank, and the adjustment holes are spaced 1-1/4" center to center. To...
view full answer...
- Recommended Trailer Hitch Receiver and Weight Distribution System for 2007 Toyota Sienna an Pop-UpFor your 2007 Toyota Sienna, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75237 is my recommendation. Then if you don't have the wiring and brake controller, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118304, the # ETBC7L and Curt Echo Wireless Trailer Brake Controller # C51180. Then I recommend the Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 10K GTW, 600 lbs TW # RP66072 along with...
view full answer... - Is Curt Weight Distribution Shank #17100 Compatible with Fastway Weight DistributionYes the Curt weight distribution shank part # C17100 is perfectly compatible with the Fastway e2 weight distribution system you have.
view full answer... - Why is the Maximum Drop on the Curt Adjustable Weight Distribution Shank # C17100 2-1/2 Inches?The reason why the Curt Adjustable Weight Distribution Shank # C17100 lists the maximum drop at 3 inches is because the maximum measurement in the drop position from the inside top edge of the receiver tip of your hitch to the top of the ball of a compatible Curt round bar systems like the Curt MV Weight Distribution System w/ Friction Sway Control # C17063 is 3 inches. I went ahead and linked a video from the Curt # C17063 that talks about this maximum drop measurement in addition to the...
view full answer... - Is Curt Weight Distribution System Available With 12 Inch Adjustable shankThe Curt Weight Distribution System With Sway Control, part # C17322, has a 10000 lb gross towing weight and is designed to fit 2 inch by 2 inch receiver openings. It comes with a shank that has a 5-1/2 inch rise or 7-1/2 inch drop opening. If you wish to need the Curt Bolt-Together Adjustable Shank, part # C17100, it would have to be purchased separately.
view full answer... - Recommended Adjustable 10K Ball Mount with Sway Control Bracket for Dump TrailerFor your 10K capacity for an anti-sway bar, you would need to utilize a weight distribution head and shank. For a friction bar like # 83660, I recommend the Replacement Weight Distribution Bolt-Together Round Bar Head # PS58442 and weight distribution shank # C17100 for you application. This will allow you to use two sway bars if desired. It also gives you the option of adding weight distribution with round bars # PS58441, chains # 3216, and bolt on hangers # RP58305.
view full answer... - Recommended 7 Hole 2" Shank for a Weight Distribution SystemI believe we have just what you're looking for. Check out the Curt Adjustable Weight Distribution Shank # C17100. This weight distribution shank has 7 holes for adjustment, will work with 2" trailer hitches, and has a maximum weight capacity of 15,000 lbs.
view full answer...
- Comparing Forged and Welded Weight Distribution ShanksThere are not many differences between a welded and forged weight distribution shank in regards to practicality. They both pass the same DOT standards and meet the maximum 15,000 lb weight capacity requirement. The forged shanks started to become popular to save weight with 2-1/2" hitch applications. I would be willing to bet the receiver tube on your motorhome is a 2" therefore you would be best to just stick with a welded shank. I recommend the Curt Adjustable Weight Distribution Shank...
view full answer... - Recommended Replacement Weight Distribution Shank for Curt TruTrack System Yes, we do offer a replacement shank for the Curt Weight Distribution Hitch item # C17500. It is the Curt Adjustable Weight Distribution Shank - 8" item # C17100.
view full answer... - Will Curt Weight Distribution Shank Work in Place of Equal-i-zer Shank for 2 Inch ReceiverWeight distribution shanks are one of the few parts that are okay to swap between brands and still work; since both shanks fit in a 2" hitch receiver you can use the Curt Adjustable Weight Distribution Shank # C17100. We do carry the Equal-i-zer shank you are looking for though if you would like to use that, the Equal-i-zer Weight Distribution Shank # EQ90-02-4100.
view full answer... - Which Weight Distribution Shank for 24 Inch Receiver Height and 17 Inch Coupler HeightIdeally, you'll want your weight distribution head to sit about 3/4 to 1-1/2 inches higher than the level coupler height of the trailer to compensate for trailer squat. Since the difference in your coupler and receiver height is 7 inches, I'd recommend you go with a shank that offers at least a 6 inch drop, like the Curt # C17121. This would put your trailer ball about 1 inch above level, which would be absolutely perfect.
view full answer... - Shank with More Drop for Blue Ox Weight Distribution System # BLU45FRThe shank that comes with Blue Ox weight distribution system # BLU45FR has a drop of 1-1/2 inches so for a shank that has 3 inches of drop you can use # C17100. But you may want to go with something that offers more rise/drop options just in case you need it in the future. For that I recommend # 17120. For a round bar weight distribution system it offers up to 6-1/8 inches of drop and up to 10 inches of rise. Both shanks listed above are compatible with your weight distribution system.
view full answer... - Will the Curt Adjustable Weight Distribution Shank Accept 3/4 Inch Diameter BoltsI spoke with my contact at Curt and the Bolt-Together Adjustable Weight Distribution Shank - 12 Inch, # C17100, does take 3/4 inch diameter mounting bolts. The measurement between the bolt holes from center to center is 1-1/4 inches. I have attached a photo of these measurements that may help out.
view full answer...
- Recommended Weight Distribution Shank for Low Ground ClearanceIt sounds like you're looking for a new weight distribution shank with less drop and if that's the case we have tons of great options. In order to see how much drop/rise you need you can measure from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler while level. I have attached a full list of our options below. The Curt Adjustable Weight Distribution Shank part # C17100 for example only offers a 2"...
view full answer... - Availability of 16K Weight Distribution System with Adjustable Shank that Has 12 Inch DropWe do not have any round bar weight distribution systems available that are rated for the amount of weight you are looking for so you will need to go with a trunnion bar setup. For this I recommend taking a look at the Reese Strait-Line Weight Distribution System # RP66130. This system features a towing weight capacity of 15,000 pounds and a tongue weight range of 800 to 1,500 pounds. You will want to make sure the total tongue weight of your setup (which includes both the loaded tongue...
view full answer... - Replacement Shank For Curt Weight Distribution System Round Bar C17002I confirmed with my contact at Curt that the correct replacement shank for Curt Weight Distribution System C17002 is Curt Adjustable Weight Distribution Shank # C17100. This offers 7 adjustment holes and measures 8" from the center of the pin hole to the center of the adjustment holes. I have attached a demonstration video for this shank.
view full answer... - Recommendation for Adding 2nd Friction Sway Control Bar to TrailerTo add a second friction sway control, you will need the second Reese Friction Sway Control Kit # 83660 and you'll need to weld a tab onto your trailer hitch ball platform like # C45822. The friction bar will simply be inverted on the left side, but that will not impact the function and is designed for use on either side. I've attached an article to assist and 2 bars are recommended on trailers over 26 feet long or if you simply want more sway control. The other option is to use a weight...
view full answer...
- Replacement Parts for Curt 10K MV Weight Distribution SystemThe Curt MV Weight Distribution System part # C17062 is composed of the following parts: Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution part # 17109 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000 lbs part # A-6 Replacement Lift Handle for Curt Weight Distribution Systems part # C17112 Replacement Lift Bracket for Curt Weight Distribution Systems part # C17008 Replacement Bolt Kit for Curt MV Weight Distribution Systems part # C17076 Curt...
view full answer... - Compatibility of Ball Mount Adapter # BA-1 with Weigh Safe Hitch Ball with Scale # WSUN-1I went out to our warehouse to measure the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1 for you. The platform measured 11/16th inches which is the 3/4 inch platform they are referring to. I recommend the # BA-1 for your Weigh Safe 2" and 2-5/16" Hitch Ball w/Built-In Scale # WSUN-1. These two parts will work very well together. That platform is designed to work with the Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches # AMAC1, but...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Jeff D
Installed by:
Andy C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Russell
5/5/2023
This product has worked well for us and has been a great purchase. It was a great value and worked well with my Ford Ranger.