THIS ITEM IS NOT A FIT FOR
1995 Jeep YJ
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13345
Our Price: $268.16
1995 Jeep YJ
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (65)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13345
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13345 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2008 Hyundai Entourage
- 2006 - 2014 Kia Sedona
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13345
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ric M.06/06/2018
2014 Kia Sedona
Package arrived, but box was all torn up and one of the ends of the hitch was bent on one of the corner screw hole, and some deep scratches on the hitch. I also had difficulty in installing and aligning the holes. Their videos made the fit look easy and had plenty of wiggle room but mine was really tight. I prefer tight, but not this one. Anyway I still managed to fit it on my own with the help of a few pieces of wood and 2 jacks to hold it in place while I wrestle with the screws...
Overall very satisfied and would buy from etrailer again.
by: Andrew 05/03/2023
2008 Hyundai Entourage
Overall a good product. Installation wasn't too hard. Instructional video was spot on. Only issue I have with it is that it sits a little lower to the ground and there's a gap between the vehicle and the hitch. I feel like it could be brought up an inch or two and give more clearance below. But doesn't affect the functionality and I would definitely purchase again.
by: Mark Mc06/07/2015
Ordered this on Monday night arrived Thursday, faster than I expected for free shipping. Took awhile to clean the holes on my car so they would accept the bolts. I used WD-40 and the wire brush for cleaning a pistol. Hitch was a perfect fit and was exactly as stated. I will definitely order from etrailer again.
by: Barry05/13/2016
This is the second trailer hitch I've ordered from etrailer. Easy order process and great product. Will recommend to others.
Barry J.
5/13/2017
The trailer hitch is still working out great. As i said it was easy to install. Hopefully, within the next year, Ill be able to purchase another for my pick up truck. Thanks again for a great product
by: TGS07/04/2017
2006 Kia Sedona
Delivery from etrailer was very fast. Installation was difficult, but I think it was due to problems with my car rather than an issue with the trailer hitch. The hitch structure wouldn't fit between the gas tank and car frame on one side. We had to use a tire jack to apply upward pressure to force the hitch into place. Once we did that, we simply bolted it as directions indicated, and everything works great. I'm very pleased with etrailer and their product and service. The only reason I did not award 5 stars is because of the install problem.
by: Brian02/04/2016
2008 Kia Sedona
I purchased a trailer hitch, wiring harness, brake controller and all the additional necessary wiring for my 2008 Kia Sedona. Other than issues I encountered unrelated to the items I purchased, everything installed smoothly and continues to operate as expected after 6 months. I would definitely recommend this site to anyone. In addition, their on point instructional videos made things even easier than I could have hoped.
by: Brian02/04/2016
2008 Kia Sedona
I purchased a trailer hitch, wiring harness, brake controller and all the additional necessary wiring for my 2008 Kia Sedona. Other than issues I encountered unrelated to the items I purchased, everything installed smoothly and continues to operate as expected after 6 months. I would definitely recommend this site to anyone. In addition, their on point instructional videos made things even easier than I could have hoped.
by: Brad E.04/14/2017
2006 Kia Sedona
I just finished installing this hitch and wiring for my Kia Sedona and I am very pleased with this product.
The hitch is sturdy and well constructed and think it's important to note that the wiring kit did not skimp on you. Everything that you need is included, wire connectors, zip ties and more length of power wire than you actually need. I think it's a nice touch in the current age of cutting every corner possible that many companies adhere to.
You should note that the 30 minute install time is for a professional in near perfect circumstances. However, as a layman and a trucker that has never installed a hitch before I spent 2 and 1/2 hours installing and had VERY little trouble.
Thanks, I will recommend Etrailers and this product to my friends and family
by: Joseph06/21/2020
The products I received , trailer hitch ,and wiring harness , were perfect . Bolt holes lined up perfectly. Wiring harness ,and directions were very simple to read , and install went according to plan . Very Happy. Products , were delivered in a timely manner. Great.
by: M M.11/16/2014
2015 Kia Sedona
Installation took about 40 minutes longer than the 15 minutes it should have taken. I installed this on a Kia Sedona minivan. The hitch was about 3/4 of an inch too narrow to clear the cargo floor welds. After pushing really hard, which didn't work, I finally used a 2 lb hammer to bend the brackets on the hitch just a bit so that it would clear. Once adjusted, it installed in a manner of minutes. Everything lined up beautifully.
by: Mark08/16/2019
Was easy to install. Use to pull small fishing boat on trailer, but most importantly to carry BIKE RACK on van. Works great! Should have done this years before.
by: Matt J05/14/2015
2012 Kia Sedona
The hitch itself is GREAT, the bolts sent along with the hitch were a nightmare; the most difficult bolts I have ever installed. They were the right size/thread pattern, but they just would not screw in. Finally, after 1.5 hours of trying, I got them all in. I had even sprayed Liquid Wrench in them and used the cleaning brush y'all recommend--and I did that several times in each hole. I'm rating it 4/5 because ultimately I'm happy with the hitch, just need a better functioning bolt. Who knows, perhaps it is the frame nuts on the vehicle that need help, either way, it wasn't as simple and quick as it should have been.
by: Richard Z06/20/2023
The unit fit the vehicle perfectly and was very easy to install.
by: Elissa10/20/2011
2012 Kia Sedona
I finally decided on the Curt trailer hitch for my 2012 Kia Sedona and this was a good choice. Had a neighbor put it on and the holes lined up perfectly. The hardest part he said was lowering the tail pipe but it is heavy duty and ought to pull my pop up camper easily. The wiring harness went on easily too thanks to the directions and the youtube video (7 minutes long) which showed how to install the wiring. All in all, a very positive experience.
by: Michael01/27/2019
2009 Kia Sedona
Videos were very helpful before and during this project. had to special order the tap for my rusty frame. both the hitch and the wiring installed just as described. nice work etrailer!
by: Doug H02/26/2013
2006 Kia Sedona
I have used eTrailer 2 times now and bought 3 different products. I can not think of any aspect of my experience as a customer that was not perfect. I got support when I asked for it, good advice, great help with installation via the video, great price, fast delivery. Other than have eTrailer come to my house and install their products for free I don't see a way for them to make me any happier.
Excellent is not enough...Exceptional! I wish I needed more from you!!
by: Mike R.05/25/2017
2014 Kia Sedona
I received the trailer hitch and wiring harness a few days after ordering and it was exactly what it was advertised to be. Everything fit perfectly and installation was straight forward.
by: Bill L03/04/2015
I can only say I am very Impressed with the outstanding service I was given by eTrailer.com I ordered this hitch on Sunday and received it on Tuesday and it was an exact fit I will recommend eTrailer to anyone I know needing a trailer hitch Thank you eTrailer for the great service...
by: Nick C.07/31/2021
Excellent trailer hitch. Installed in about 5 minutes after spending 10 minutes tapping all the rough and rusty mounting bolt holes on our van.
by: Dave S06/15/2017
2014 Kia Sedona
Easy fit. Looks good. Very fast, free shipping. Took about an hour to install, most of which was spent cleaning out and trying to get bolts to thread into rusted holes in the frame. Get a real good wire tube brush. Spray holes with a penetrating oil or solvent the day you order the hitch (not the minute before installing like I did).
by: Tim Q.07/20/2012
Everything about this experience has been PERFECT! I ordered on 7/16 and the hitch and wiring harness arrived on 7/19. Using the online videos, I was able to install both in about 2 hours. I could have completed the process faster if I used a lift. Instead, I did this alone with my van parked in the fron lawn. It is also worth noting that I had shoulder surgery 6 weeks ago and am not operating at full capacity. Thanks for everything!
by: Jake06/25/2012
Rock solid and sturdy. I bought this to use to hold an Allen 4 slot bike rack. It took me about 45 mins to install. The holes for bolts on the tailpipe side were rusted and I needed to order a 12mm tap to clear the rust. One of the tailpipe bolts was hard to access but with patience it worked. The hitch then went on easily with the 6 supplied washers and bolts.
by: Jeffrey01/31/2019
Works great, easy install and after a year of use, it still looks shiny and new! It's everything I was looking for in a hitch.
by: Jeff09/13/2012
2007 Hyundai Entourage
extremely happy with the service i received! trailer hitch could not have come quicker, i've installed the hitch and used it, works perfect!
by: Jim 08/31/2020
2006 Kia Sedona
Fits perfectly on my 2006 Sedona. 6 bolts, 20 minutes, easy instillation. Heavy duty construction, came with bolts and washers for easy install.
Also ordered wire harness from this website.
25
65
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Brake Controller And Brakes Recommendations For 2010 Kia Sedona And TrailerThank you for the spec sheet on the axle you have on your trailer. I spoke with my contact at Dexter and they told me that you do not need to replace your axle, you can just upgrade the one you have. They told me that you have the brake mounting flange mounted on your axle so what you will want to do is add a new hub and drum, the brakes, and wiring for your trailer, and you should be good to go. The hub and drum I recommend is the etrailer.com Trailer Hub Assembly, part # AKHD-545-35-G-K....
view full answer... - Trailer Hitch for a 2007 Kia Sedona LX Long Wheel BaseWhat you can do is measure the wheel base of your 2007 Kia Sedona to determine if you need the long wheel base hitch, # C13345 or the short wheel base hitch, # 75551. The long wheel base is 119 inches. The short wheel base will be 113.8 inches. Measure from the center of the front wheel to the center of the rear wheel. From what we have found, the LX and EX models are long wheel base models. They will also have a third row of seating. I still recommend measuring to be sure. For either...
view full answer... - Trailer Hitch and Wiring for a 2012 Kia Sedona SEYes, we do have trailer hitches for the 2012 Kia Sedona SE. You can use Curt trailer hitch # C13345. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have...
view full answer... - Replacement Hardware Kit For Curt C13345To get replacement hardware for the Curt # C13345 you would need The Replacement Hardware Kit # RHK. Please specify model number and hitch manufacturer when ordering. The price of the kit will be on the product page. I have attached a video review below.
view full answer... - Recommended Hitch and 6-Way Wiring Harness for 2010 Kia SedonaThe recommended custom fit wiring for your 2010 Kia Sedona with a short wheel base is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56347. This part provides a 4-way flat trailer connector at the back of your Kia to power your trailer's signal lights. It sounds like you have a 6-pole connection on your trailer so you will need the 6-pole adapter # 37175. You will be able to retain use of the 4 pole connector, and the mounting bracket is included as...
view full answer... - How Wide Is The Curt Trailer Hitch Receiver C13345?I had our warehouse measure the Curt Trailer Hitch Receiver # C13345 you were looking at and it measures 52-1/2" wide as you can see in the included diagram. I included a video of this hitch being installed for you to take a look at.
view full answer...
- How Do I Tell if My Kia Sedona is Short Wheel Base or Long Wheel BaseI did some research and the Sedona is Short Wheel Base -SWB. If it is a Sedona LX or a Sedona EX it is a Long Wheel Base-LWB. The best way to be sure is to measure. Measure from the center of the front wheel to the center of the rear wheel. If the measurement is 113.8 inches, it is SWB. If the measurement is 118.9 inches, it is LWB. For the SWB models we have the Draw-Tite # 75551. Then for the LWB models, you would need the Curt # C13345.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2012 Kia SedonaInstallation of the parts for your 2012 Kia Sedona is definitely something you can do. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13345 for your trailer hitch which comes with all the mounting bolts and should take about 15 minutes to install because there are already nuts welded inside your frame so it is simply adding bolts and washers then torqueing them to spec. I've attached a video to assist. For your wiring, I recommend the T-One Vehicle Wiring...
view full answer... - Which Vehicles does Curt Trailer Hitch C13345 FitI can certainly provide a list of the vehicles that the Curt Trailer hitch, # C13345, will fit. 2007 - 2008 Hyundai Entourage 2006 - 2014 Kia Sedona I have also included a link to the installation details and a video showing a typical installation of this hitch. This is a class III trailer hitch with a tongue weight capacity of 350 pounds and gross trailer weight capacity of 3,500 pounds. The hitch can also be used with weight distribution which increases capacities to 400 pounds and...
view full answer... - Solution for Hitch Install Hardware of 2011 Kia Sedona LX that Wont Thread InThe issue you are describing is a pretty common one we see. The easy solution is to tap the threads with an M12 X 1.25 thread tap. This is the most efficient way to clean the weld nuts on your vehicle frame.
view full answer... - Hitch and Other Towing Accessories Needed to Tow Pop-Up Camper With 2009 Kia SedonaTo tow your pop-up, you'll need a hitch, wiring, a ball mount, trailer ball, brake controller and a install kit for the brake controller. The hitch needed will depend on if your Sedona is the EX/LX or the base model. For the LX/EX model, I'd recommend the Curt # C13345. For the base model, go with the Draw-Tite # 75551. For the trailer wiring harness, use the Tow Ready # 118410. For a ball mount, use part # 2752. Your camper should have the necessary ball size stamped into the coupler...
view full answer... - Help Deciding Between Curt and Draw Tite Hitch for 2008 Kia SedonaIf you have a base model, you'd want the part # 75551 or if you have the EX or LX model you'd want the part # C13345.
view full answer... - Recommended 3-Bike Hitch Mounted Rack for 2006 Kia SedonaIf you do not already have a hitch, I can highly recommend the Curt # C13345. Although we offer numerous 3 bike-capacity options (see provided link), in my opinion the Swagman Trailhead part # S63365 offers many desirable features at an inexpensive price point. The Trailhead provides what I consider to be essential features like anti-sway cradles and padded cradles with sturdy rubber straps that both protect and secure your bikes to the rack. The Trailhead also has an angled shank, which...
view full answer... - What Does Curt Hitch for 2010 Kia Sedona WeighThe Curt part # C13345 that you referenced weighs 34 lbs and is a confirmed fit for your 2010 Kia Sedona. I attached an install video link to this page as well.
view full answer... - Parts Needed to Install Curt Echo Brake Controller in 2008 Kia SedonaWe can get you set up with everything you need to install the Curt Echo Mobile Brake Controller # C51180 on your 2008 Kia Sedona. The parts you need are the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118410 - 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L - Curt Echo Wireless Trailer Brake Controller # C51180 You will start with a 4-way, which is for the trailer lighting, and that will plug into the 7-way that is part of the...
view full answer... - Correct Hitch Mounting Bolt Size for 2006 Kia SedonaThe hitch for the Sedona does use M12 x 1.25 bolts. What you describe is a very common issue. Once a vehicle is more than a couple years old, road grime and corrosion can build up on the nuts welded into the frame which makes it difficult to get the mounting bolts for the # C13345 started, making you think you have the wrong installation hardware. This is especially common in the Midwest and North where ice melting chemicals are commonly used on roads in the winter. I'd recommend using...
view full answer... - How Can I Tell If 2009 Kia Sedona Is Short Or Long Wheel Base And What Hitch To UseOn the 2009 Kia Sedona, the long wheelbase has the third row seating that will fold into the floor. The short wheelbase does not have that feature. The Curt Trailer Hitch, # C13345, is for the long wheelbase Kia Sedona. It is a bolt-on application with no drilling required. If you have the short wheelbase Kia Sedona then you will use the Draw-Tite Trailer Hitch, # 75551. The installation on this hitch does require removal of the tie-down hook and there is a access hole on the passengers...
view full answer... - Which Curt Class III Hitch Fits 2007 Kia SedonaCurt has trailer hitches that fit your 2007 Kia Sedona like the part # C13345 which fits the EX or LX models, and the # 75551 for the short base models. But the # C13900 does not fit any version of your vehicle.
view full answer... - Can 2008 Kia Sedona Safely Pull Boat out of Water?The 2008 Kia Sedona has a 3.8 liter V6 with 250 hp, and while that's not a beast it's certainly capable of pulling a boat trailer out of the water with your Curt # C13345 Class III hitch, barring an abnormally steep gradient. The reason you've probably heard a number of different things is because there are many factors that can lead to problems - or lack thereof - when towing. How the vehicle was maintained, the amount of cargo it has inside and the quality of the tires will make a difference....
view full answer... - Replacement Hitch Hardware Kit Recommendation for a 2007 Hyundai EntourageIf you have a hitch for your 2007 Hyundai Entourage that we carry and that is confirmed to fit your vehicle like the Curt Trailer Hitch # C13345 that you referenced all you would need to do to get replacement hardware is purchase a Replacement Hardware Kit # RHK. You will need to enter the part number for the hitch on the product page, but once you do you will receive the correct hardware kit. According to the installation instructions for this product that I attached the hardware is 6...
view full answer... - Can Trailer Hitch for 2008 Kia Sedona be Welded OnThe hitches we offer for your 2008 Kia Sedona like the # C13345 were designed to be bolted on but there's no reason you couldn't weld them to the bottom of the vehicle frame if that's your preference.
view full answer... - Cleaning Out Corroded Weld Nuts to Install a Trailer Hitch on a 2007 Kia SedonaCorrosion and road grime can get inside of vehicle weld nuts on any vehicle that has seen at least one winter. This is most likely the case you are facing. There is a solution. You will need to lean out the weld nuts using a spray lubricant and a wire brush like # DW00254. I have included links to a video and FAQ article that will show you how to clean out the weld nuts for hitch installation.
view full answer... - Trailer Hitch Recommendation for a 2012 Kia SedonaThe CurtTrailer Hitch Receiver, part # C13345, would work well for your 2012 Kia Sedona. You may also be interested in the following products to complete your towing setup: Tekonsha Trailer Wiring # 118410 Ball Mount 2-3/4 inch Rise or 4 inch Drop # 2753 Hitch Ball with 2 inch Diameter and Medium Shank # 19247
view full answer... - Cleaning Out Weld Nuts to Install a Trailer Hitch on a 2011 Kia SedonaI would advise against using a thread tap to clean the weld nuts on your 2011 Kia Sedona. That should be a last resort because the possibility of a less than perfect tap is high. We recommend using a combination of spray lubricant, a wire brush, and elbow grease to clean corroded weld-nuts. We even have a help article and video on this subject which I have linked for you. The bolts for hitch # C13345 are indeed M12 x 1.25. For a wire brush you can use # 814092.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark M.
6/6/2016
Great product still holding up after a year on the vehicle. no signs of rust.