Correct Hitch Mounting Bolt Size for 2006 Kia Sedona
Question:
My kia seems to be smaller than m12... Is their another size for 2006 kia sedona?
asked by: Kelly
Expert Reply:
The hitch for the Sedona does use M12 x 1.25 bolts.
What you describe is a very common issue. Once a vehicle is more than a couple years old, road grime and corrosion can build up on the nuts welded into the frame which makes it difficult to get the mounting bolts for the # C13345 started, making you think you have the wrong installation hardware. This is especially common in the Midwest and North where ice melting chemicals are commonly used on roads in the winter.
I'd recommend using a spray lubricant like WD-40 and giving each mounting hole a good soaking, followed up by a good scrubbing using a wire brush like what's used on a battery terminal cleaner like # DW00254. You might need to repeat this several times. In the worst case scenario, you'll need to chase the threads using a thread tap for an M12x1.25 bolt to remove the corrosion. If you've never used a thread tap before, you might want to have a mechanic handle it, because it's easy to mess up the threads if you don't run the tap through the threads so it's perfectly straight.
I've linked to an install video for the hitch, plus a demonstration video where my buddy Shane shows how to use a thread tap. The tap in the video is an M10, but the procedure shown would be the same.
Products Referenced in This Question
Battery Post and Terminal Cleaner - Wire Brush
- Wiring
- Tools for Wiring
- Wire Brush
- Deka
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: hitch
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Difference Between EcoHitch, Curt and Draw-Tite 2 Inch Hitches for 2020 Subaru Forester
- Shop: Replacement Hardware Kit for Trailer Hitches
- Video: Trailer Hitch Installation - 2013 Kia Sorento - Curt
- Shop: Curt Weight Distribution Conical Washer Replacement Kit
- Q&A: What Size Mounting Bolts Do I Need For My 2017 Kia Sedona Hitch
- Video: Trailer Hitch Installation - 2006 Kia Sedona - Curt
- Q&A: What Size Bolts Come with Draw Tite Hitch # 75717
- Shop: Vehicle Tow Bar Wiring
- Video: Trailer Hitch Installation - 2011 Kia Sedona - Curt
- Q&A: What Trailer Wiring Connectors are Often Found on Rental Trailers
- Video: Hopkins 4-Pole to 7-Pole and 4-Pole Adapter Installation - 2014 Honda Odyssey
- Q&A: Troubleshooting A Tekonsha P3 Brake Controller that Says Power on the Display
- Q&A: Troubleshooting 4-Way on 2007 Kia Sedona with Only LeftStop/Turn Signal Working
- Q&A: Troubleshooting P3 Brake Controller Power Loss Brake Error Message
- Shop: Brake Controller
- Video: Trailer Brake Controller Wire Testing
- Video: Trailer Brake Controller Installation - 2008 Kia Sedona
- Search Results: 90160
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch