Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(161 reviews)
Price: $226.49
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13115
Retail:$449.87
Our Price: $226.49
You Save: $223.38
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (161)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13115
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- CURT
- 400 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13115 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2021 Kia Sedona
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13115
Average Customer Rating: 4.9 out of 5 stars (161 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ginger s08/13/2017
2015 Kia Sedona
The hitch has proven very good in February my van was rear ended the hitch saved it from a lot of damage there was no damage to the hitch there made are really tough excellent review
by: Jeffrey08/23/2021
Opened the box and there are no instructions or mounting hardware???
The are at least two considerable scrapes on the tubing that shows when mounted.
This is the 2nd item I’ve ordered this month that was damaged.
Needed this immediately-taking daughter to college this week!
Brooke M.
8/30/2021
Thank you for bringing this to our attention! Our Customer Service team will be in touch with you.
by: Marty05/07/2020
2019 Kia Sedona
Installed on a 2019 Kia Sedona. I was very happy with etrailer.com. There was so much information on their website it gave me the inspiration to install the hitch myself (and save $200). Did it take more than the estimated time? Yes, but i expected it to. Here is what I learned.
1. There are many videos out there, look at the ones for your car...you may learn a different trick.
2. I did not raise the car with jacks or ramps. In hindsight that would have given me more leverage on removing the exhaust bracket and tighten the bolts.
3. I only removed the back bracelet on the exhaust. Removing more would have given me more room to torque the bolts.
4. I ended up cutting the cover plate (that the instructions said to throw away) and re-installed it. Looks really nice. See picture.
Would definitely use etrailer.com in the future
by: Michael05/26/2020
Box arrived in great shape, hitch looked perfect. Install went exactly as shown in the video etrailer has posted. Everything aligned perfectly with factory mounting holes, and I was able to pretty easily install this by myself. I did use a couple wood blocks to hold the weight on the muffler side while I initially threaded the bolts, but probably could have done it even without the blocks, as the muffler itself can bear the weight. The only hiccup I had was that the uncovered mounting holes on the muffler side were extremely dirty and gummed up with road grime. It took a lot of penetrating oil and wire brushing to get those 3 holes clean enough for the bolts to thread cleanly. And I used some snips to cut a notch in the undercarriage guard panel that I had to remove during install, which then allowed for it to easily be reinstalled, no need to leave it off.
by: ludzidprod08/20/2017
Fit exactly as advertised, the video on the etrailer web page was very informative, especially how to support the exhaust system when lowering it. Only suggestion - The protective panel on the driver side can be reinstalled by simply cutting a 3/8" wide by 8" long slit to accommodate the support flange on the hitch. All the snap connectors can be reinstalled providing the protection the panel was designed for. Please see the attached picture after the hitch was installed.
by: James06/01/2018
2016 Kia Sedona
Great hitch, easy to install, and everything was exactly as described on etrailer.com Exactly was we needed for our Sedona van.
by: Katie 06/18/2023
2018 Kia Sedona
We were able to get this installed in under 2 hours. Only complaint was that one end of the hitch bracket was hanging out of the box upon delivery.
by: Randall 10/21/2023
2015 Kia Sedona
Very nice product and lightning fast shipping from George and the crew, thanks!
by: Douglas09/15/2018
2017 Kia Sedona
installed on 2017 kia sedona with no issues. arrived one day ahead of schedule in perfect condition. wiring harness installed with no issues.
by: Jacob08/17/2018
Bolted right in, no problems. Video was exactly what I needed and had to do to put the hitch in!!
by: Arturo06/24/2020
2020 Kia Sedona
Excelent product, and easy to install. No more than 25 minutes
by: Anthony08/23/2021
The hitch was a great price. It was the same price as the one on[line] and also brought the mounting hardware which can cost $xx purchased separately. They also included an installation video which made it easy enough for me and my 12 year old son to install.
Anthony
8/24/2022
We have had the hitch installed for a year and it’s held up great. We have only used it once for a road trip to Georgia for our luggage carrier and it worked great. We haven’t really used it since but I find myself standing on it from time to time just to see how sturdy it is and it never gives at all
by: Joe B06/21/2017
2017 Kia Sedona
I received my receiver hitch and the wiring promptly. However, the box that the hitch came in was damaged so badly that it was torn open on two sides and taped back together again. This was obviously done by UPS. They handled the package so poorly that the paint on the hitch and one of the stickers was scratched and rubbed badly enough to need touch-up paint to get it looking like it should. I accepted the package from UPS only because all of the contents were present. This was thanks to etrailer.com taping the hardware and the wiring securely to the hitch. Thank you etrailer.com for that. BTW, I would have given etrailer.com 5 stars except for the packaging. Although I cannot make a suggestion on how it could have been packaged differently to prevent the paint damage, I feel that etrailer.com bears some responsibility for their choice of shipping carrier or at least for the durability of the packing material used.
I must say that the hitch is high quality and constructed very well. The mounting bolts are appropriate hardware grade and of obvious high quality also. I have not installed the hitch or the wiring yet so I cannot comment on fit or ease of installation. I plan to install it when I can get the car to the hobby shop where I can get some hoist time. However, from the looks of everything I should not encounter any problems. I can say this with some confidence because I have ordered stuff from etrailer.com in the past and I have never encountered any problems. Other than the packaging problem noted above, I am very happy with how quickly the hitch got to me and most especially for the follow-up confirmation and status emails from etrailer.com.
Joe B.
6/21/2018
I love it! This is a great product. Installation was a breeze thanks to the video. It really was as easy as shown in the video.
by: Andrew R03/11/2019
2016 Kia Sedona
I have had this hitch installed for over a year, used it a few times and it works great. I performed the installation myself and it was fairly easy. 2016 Kia Sedona LX
The hitch has a little sign of rust on the inside receiver but that is expected with harsh Canadian winters. A hitch cover could possibly prevent this...but it does not bother me.
Happy with the hitch, excellent customer service from etrailer.com
Andrew R.
3/12/2020
Still performs as expected, has not shown signs of rusting. I ended up getting a hitch cover. Still very happy with the purchase and would recommend it to others.
by: Anthony 09/20/2023
Very fast shipping and at a better price than I could find locally.
by: Carrie. C11/28/2016
First time ordering definitely will recommend, we received our Curt trailer hitch receiver in a few days after we ordered and was an easy install. Thanks!
Carrie C.
11/28/2017
Great hitch! Will definitely purchase another for future vehicle.
by: Adam P07/12/2016
Kia Sedona
The product was exactly as pictured for our Kia Sedona, very strongly built will serve my needs very well for towing boat and small utility trailer.
Order was filled within the hour and arrived one day early from scheduled delivery.
Adam P.
7/12/2017
Hitch is performing very well serving my needs.
by: Richard C09/05/2016
2015 Kia Sedona
has performed well with no problems. Installation was easy and instructions clear. recommend this site for hitches
Jena C.
10/4/2017
Working just fine a year later
Jena C.
10/4/2017
Working just fine a year later
by: Mark11/06/2018
2016 Kia Sedona
I purchased this hitch last year for my 2016 Kia Sedona and haven't regretted the decision one bit. We were taking bikes to the beach the same week using a Thule Vertex 5-bike rack so my timeline was compressed. Shipping was prompt and the install was relatively easy. The videos etrailer posts for the installation made it even easier. I've used the hitch not only for the bike rack (quite frequently) but also to tow an enclosed trailer (needed the additional wiring harness kit which I ordered later). No problems either time. I've been really pleased with the hitch and would recommend it to anyone.
by: Oscar 05/04/2023
The product is awesome!! It’s holding great and it’s made my van capable of hauling more than just trunk space
by: Anastasha Anderson07/19/2020
Using this hitch for 2 1/2 years now, it works well. We regularly haul bikes and occasionally a small trailer. The hitch is solid and works.
My one issue is some rust. That always seems to be a hitch issue, but is happening with this one too.
by: Jason C08/29/2016
2016 Kia Sedona
Bolted right up. The only trick to this installation is to support the exhaust pipe just passed the muffler with a ratchet strap. Lubricate the exhaust pipe hangers. I used regular sae 30 motor oil. I think there is 4 or 5 of them. Use a screwdriver or small crowbar to pop them off. The tailpipe will drop down enough to gain access to the threaded holes in the bumper. It helps to have an extra set of hands but you could do it yourself with a jack. It bolted right up. I also got the wiring harness and it was a snap. I trimmed the driver side splash guard to fit around the hitch and it looks fantastic. Also, I got the part to attach the flat 4-pin connector. Works great. I used it the next morning and everything worked like a champ. Thanks!
by: Joseph B09/07/2017
2016 Kia Sedona
It fits well and was relatively easy to set up. The tricky part for me was getting the muffler loose from the rubber supports. It comes with pretty good paper instructions with color pictures that you can have with you out side while you are installing it
Joseph B.
9/7/2018
Product works will. No issues so all good!
by: Erik M05/27/2020
Kia
I ordered the hitch for our Kia Minivan. Install was pretty straightforward, a bit of a pain around the muffler due to the mounting location on the vehicle.
The hitch is used for mounting a bike rack and it has worked great. After a year and one winter in Wisconsin the finish has held up well. No rust.
by: Jared 01/20/2022
Dodge Journey
Shipping went well, The installation was pretty easy, watching the videos helped. Wish it had a mount for the trailer plug in. After isntallation and wiring we pulled a tent trailer on a 5,000 mile journey, it worked great no issues.
25
161
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Towing Components Recommendation for 2016 Kia Sedona to Tow R-Pod 176T SafelyYou are on the right track with the upgrades you are considering to tow your potential R-Pod 176T safely with your 2016 Kia Sedona that has the Curt hitch part # C13115 installed on it. A brake controller is the first thing I'd recommend installing like you have as it will help your vehicle stop and at the weight of your trailer is basically a requirement. Since you have that covered you're good there. Next I'd strongly recommend a transmission cooler like the Derale # D13503 which is...
view full answer... - Trailer Hitch and Wiring for a 2016 Kia SedonaFor your 2016 Kia Sedona I recommend Curt trailer hitch # C13115. This is a Class III trailer hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight so it can handle your trailer easily. I have included a link to a video showing an example installation for you. For trailer wiring I recommend trailer wiring harness # C56332 for a 4-Way flat connector at the back of the van. Since you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes...
view full answer... - Recommended Trailer Hitch for 2018 Kia Sedona The two available trailer hitches for your 2018 Kia Sedona, the Curt # C13115 and the Draw-Tite # 75894, are indeed extremely similar. Both are Class III hitches with identical 4,000 pound towing and 400 pound tongue weight limits, a round crosstube design, and welded brackets that will mount to the same locations on your Sedona's frame. Between the two options I recommend going with the Curt # C13115 because unlike the Draw-Tite model it is made right here in the USA. Curt's black powder...
view full answer...
- Ball Mount Recommendation for a 2017 Kia Sedona LX to Tow a Pop-up CamperFor a fixed ball mount you really do need to know the height difference between the top of the receiver opening on the hitch and the distance from the ground to the bottom of the coupler in order to get a ball mount with the right amount of rise or drop to tow the trailer level. You can get around that by instead using an adjustable ball mount such as # TK5007. This ball mount offers up to an 9 inch rise or 10 inch drop. It is rated for 5,000 pounds gross trailer weight (so it will cover...
view full answer... - Trailer Hitch Recommendation for 2016 Kia Sedona for Use with Hitch Cargo CarrierAll of the hitches we offer for the 2016 Kia Sedona have the same towing capacities but the one I like the best is the Curt part # C13115 as it has the best price and is made in the USA. I attached an install video for this carrier for you to check out as well. This would work well with your MaxxTow Cargo Carrier MT70106 that you are planning on using as well.
view full answer... - Class 3 Hitch With 2 Receiver Recommendation For A Kia Sedona 2019For your 2019 Kia Sedona Trailer Hitch there is the Draw-Tite # 75894 or the Curt # C13115 that are both confirmed fits for your vehicle. Both are high quality, have the same capacity with an attractive powder coat finish that will protect your hitch from rust and corrosion. The Draw-Tite has a slight edge in ease of installation because there is only some trimming or removal of the underbody for installation while the Curt requires the underbody panel be permanently removed for installation.
view full answer... - Does Trailer Wiring Harness for a Kia Sorento Also Fit a 2016 Kia SedonaThe trailer wiring harnesses for the 2016 Kia Sedona, like part # C56332, are also a fit for the Sorento and some models of the Hyundai Santa Fe and Veracruz. From my research all of the 2016 Sedonas have the factory connector to plug the wiring harness into. I attached an install video for you to check out. If you also need a hitch on your van I recommend Curt # C13115. There's a video of this being installed on a Sedona attached. Then for a ball mount you might like our kit, part...
view full answer... - Trailer Hitch and Wiring Recommendations for a 2017 Kia Sedona EXYes! The Curt trailer hitch # C13115 does fit your 2017 Kia Sedona EX. I have linked a video showing an example installation of this hitch for you. For a trailer wiring harness I recommend the harness # HM11143965. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount...
view full answer... - How Much Can a 2017 Kia Sedona Tow and What Is NeededThe towing capacity of a 2017 Kia Sedona (All Models) is 1,000 lbs for trailers without brakes or 3,500 lbs for trailers with brakes. The Starcraft Satellite16KS does have electric drum brakes so you will be good to go but just be careful how much cargo you bring with. I have attached some parts you will need that I recommend. Curt Trailer Hitch Receiver part # C13115 (See Photo) Curt T-Connector Vehicle Wiring Harness part # C56332 7-Way RV Upgrade Kit for Trailer Brake Controller Installation...
view full answer...
- Does Curt Trailer Hitch Receiver Have Enough Towing Capacity for 2020 Kia SedonaI checked the owner's manual of your 2020 Kia Sedona and found that it has a maximum trailer towing capacity of 3,500 lbs if your trailer has brakes, or 1,000 lbs if your trailer does not have brakes. What this means is that the Curt Trailer Hitch Receiver # C13115, which has a 4,000 lb towing capacity, is absolutely strong enough to handle the maximum load your 2020 Kia Sedona can tow. I have added a photo showing how this hitch will look when installed on your Sedona as well as a link...
view full answer...
- Will the Yakima EXO Swing Away Enclosed Cargo Carrier Fit a 2015 Kia SedonaThe Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR with your 2015 Kia Sedona. It will require that you have a Class III trailer hitch such as # C13115. However, with a hitch installed the distance from the center of the hitch pin hole back to clear the rear bumper is approximately 5-1/4 inches with this and other hitches that fit the Sedona. The Rola carrier measures 4-1/4 inches out so it will not clear the rear of your Sedona. So this carrier...
view full answer... - Bike Rack for 2 Kids Bikes for Use on 2016 Kia Sedona and 2018 Kia SorentoI checked all trunk-mount bike carrier fits for your two vehicles, the 2016 Kia Sedona and the 2018 Kia Sorento, to see if we have any 2-bike trunk carrier confirmed to fit properly on both vehicles. Racks fits for each car are displayed on the two linked pages, one page for each vehicle. Unfortunately none of the 2-bike carriers we sell correctly fits both of your cars. In order to use one bike rack on both cars you would need to go with a hitch-type rack and install a hitch on each of...
view full answer... - Trailer Hitch Fit for 2020 KIA SedonaThe trailer hitch part # 75894 is confirmed to fit your 2020 KIA Sedona. We have not had the chance to install the hitch onto a 2020 Sedona or a 2019 but the model years but we have sold a lot of these hitches to customers with a 2019 Sedona with no returns and also have a review from a customer who attached a picture of their hitch installed on their 2019 Sedona. I reached out to Draw-Tite and they confirmed that the hitch does fit the 2019 Sedona but like us, they have not had a chance...
view full answer... - Trailer Hitch Comparison for 2019 Kia SedonaThe Draw-Tite Trailer Hitch # 75894 and Curt Trailer Hitch # C13115 that fit your 2019 Kia Sedona are extremely similar. They install the same way at the same spot under the car (neither require drilling, they just bolt on) and both are Class III hitches with a 2" receiver and have a 4,000 lb towing capacity and 400 lb tongue weight capacity. Additionally, both have a powder coat for corrosion resistance and come with a lifetime warranty. The manufacturers and the fact that the Curt hitch...
view full answer... - Equipping 2019 Kia Sedona LX For Towing 3200 lb Pop-Up CamperYou can indeed use weight distribution with your 2019 Kia Sedona, and the hitches we offer for it are rated for use with weight distribution systems. First, let's make sure your Sedona is equipped for towing, if it isn't already. For a hitch, I'd recommend the Curt Class III, part # C13115. For a 4 pole trailer wiring harness, I'd go with # C56332 if the pop-up is NOT equipped with brakes or # TK24FR if it DOES have brakes. You'll also need a brake controller to actuate the trailer brakes....
view full answer... - Is There a Class II Trailer Hitch for a 2018 Kia SedonaThe trailer hitch options for a 2018 Kia Sedona are all class III like the Curt Trailer Hitch Receiver part # C13115 which is what I recommend. That said, if the reason you want class II is so you can use a 1-1/4" bike rack you're not out of luck, assuming the bike rack does not already have a 1-1/4" to 2" adapter sleeve (most do) you can simply obtain one with the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver part # HT02.
view full answer... - What Hitch do You Recommend for My 2021 Kia Sedona?For a great hitch for your 2021 Kia Sedona, I recommend the Curt Hitch # C13115. This hitch has a gloss coat over a powder base coat with gives you superior rust/corrosion protection over the Draw-Tite # 75894. Also, apart from providing you with 400 pounds of maximum tongue weight and 4,000 pounds of maximum towing weight, the Curt hitch is assembled here in the U.S.A. The installation involves an easy bolt-on installation that takes only about 40 minutes to complete. If you plan on towing...
view full answer... - Best Hitch for a Cargo Carrier on a 2021 Kia SedonaThe hitch that I recommend for your 2021 Kia Sedona to use a cargo carrier is the Curt Trailer Hitch Receiver # C13115. This hitch is made in the USA, has a bolt-on, no-drill installation, and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories like a cargo carrier. If you are needing a cargo carrier still, the Yakima EXO Swing Away Cargo Carrier # Y72VR is a really nice carrier that swings away from the vehicle allowing you to have...
view full answer... - What Size Mounting Bolts Do I Need For My 2017 Kia Sedona HitchFor part # C13115 to not effect the warranty of the hitch or the vehicle I would recommend part # RHK and choose the Curt option with the hitch number you provided. That will provide the correct bolts needed for your installation. If you have other questions, a link to the instructions giving you bolt sizes and torque specifications will be below.
view full answer... - Trailer Hitch and Wiring Harness Recommendation for 2015 Kia SedonaWe offer a replacement 4-pole flat trailer wiring harness for the 2015 Kia Sedona that has the factory tow package connectors. Curt harness # C56256 plugs in behind the underbody panel on the rear driver's-side corner as shown in the linked video. You will make two plug-in connections at this OEM wiring, install the supplied 10-amp fuse and mount the converter box using the included double-sided tape. This 4-pole trailer connector will then provide stop, turn and taillight signals to your...
view full answer... - Towing Capacity for Curt Trailer Hitch # C13115 for 2016 Kia SedonaThe Curt trailer hitch part # C13115 that you referenced has capacities of 4,000 lbs total trailer weight and 400 lbs tongue weight. I looked up your vehicle's capacity and it looks to have a 3,500 lb total trailer weight capacity so that would be the overall capacity since it's the lowest rated component in the setup. If you need trailer wiring you'd want the part # C56332 which is a confirmed fit. Since you wanted to do some towing you might be interested in etrailer ball mount kit...
view full answer... - Skid Wheel Preventing Trailer Hitch Bottoming Out on Steep DrivewayI'm sorry to hear the ground clearance isn't what you need for your 2020 Kia Sedona EX due to the steep driveway. The Roadmaster Rollaway Trailer Hitch Protector # RM-050 is my recommendation for you which will work with or without an accessory installed in the hitch receiver. If you plan on using a bike rack, this may still not give you clearance for the rack or the bike wheels depending on the rack used, so that should be considered as well. This will protect the hitch itself from...
view full answer... - Parts Needed to Tow a Trailer with Brakes with a 2019 Kia SedonaI'd be happy to help you get your 2019 Kia Sedona ready to tow a trailer! First off you need wiring. Since you are wanting a brake controller you need 2 different wiring kits. I recommend the CurtT-Connector # C56332 for the basic trailer wiring. The second wiring kit you need is the Upgrade Kit # ETBC7L which gives you both a 4-Way and a 7-Way connector plus it includes the 12 gauge wiring needed to power the Curt Echo # C51180 brake controller via your battery. Secondly you need a trailer...
view full answer...
- Thule Vertex Swing Fit Curt Class III Trailer HitchYes, the Curt Class III trailer hitch, # C13115, has a 2 inch receiver and the Thule Apex Swing, # TH9027XT, is made for hitches with 2 inch receivers. If you plan on carrying bikes with alternative frames, such as kids bikes or women's bikes, I recommend using an adapter bar, like part # TH982XT. The adapter bar attaches between the seat post and the handlebar stem. This allows the bike to be positioned more level in the carrier while providing additional ground clearance. I have attached...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Laura H
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Laura E.
8/15/2017
Ginger, thank you so much for your review! I hope everyone is ok! Just a quick note ? when your vehicle has been involved in an accident, the manufacturer recommends that you replace the hitch or hitch accessory due to potential unseen damage resulting from the collision.