bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2000 Dodge Van

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11202
Retail:$338.95
Our Price: $206.43
You Save: $132.52
Trailer Hitch
Not Confirmed to Fit

2000 Dodge Van

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 26 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11202 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11202

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11202 Curt Class 1 Trailer Hitch Receiver

Installation Details C11202 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11202

Average Customer Rating:  4.3 out of 5 stars   (6 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2011 Nissan Cube

As advertised super fast delivery



by:
2014 Nissan Cube

First off, I’m 81 years old. I started riding a bike again about 5/6 years ago. I’m so tired of just riding the streets in my town, that means I needed to transport my bike.I I found you, etrailer.com, and am so glad I did. You helped me get the right bike rack and hitch for my vehicle. I do not need any help loading or unloading my bike. I’m free to travel anytime I want. And freedom means a lot at my age. Again, thanks for your help. I am telling all my friends about you.



by:
2013 Nissan Cube

Instructions did not mention having to remove spare tire – no big deal
But not knowing if I should squeeze the exhaust heat baffle between the hitch and the “frame” was more of an issue. I would have had to wreck it if I tried to fold it out of the way.
The inspection hole was a lot farther away than pictured. The fish wire was just barely long enough.



by:
2014 Nissan Cube

Great hitch and trailer harness. I had an expert
install it and it took him 2 hours and not the 1 hour or less
as listed. Fits our 2014 Cube nicely. No complaints from
the mechanic. I would recommend etrailer.com.



by:

this product easy to install, fit good,took me a little longer to install then the catalog said.



by:


6
6

See what our Experts say about this CURT Trailer Hitch

  • Can A Bike Rack Be Installed Using Curt Class I 1-1/4 Inch Hitch # C11202 On 2009 Nissan Cube
    A bike rack can be installed on the Draw-Tite Class I 1-1/4 Inch Hitch # C11202 on your 2009 Nissan Cube, but you will have to be sure that the bike rack is made to fit a Class I hitch. Because of the lower tongue weight capacity of 200 lbs. on a Class I hitch you will also be limited to only 2 bikes on the bike rack. Some of the Class I compatible bike racks are listed as 3 bike and 4 bike racks, but if you look at the description of the bike rack it will say limited to 2 bikes only on...
    view full answer...
  • Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack
    I took a look at the install instructions for the Curt Trailer Hitch Receiver part # C11202 for your 2010 Nissan Cube. Based on this, the Curt Trailer Hitch Receiver looks to be an easy enough install because you only have to remove one of the rubber exhaust isolators and you don't have to lower the spare tire. According to Curt, the install should take a novice around 60 minutes to complete. The Curt Trailer Hitch Receiver has a 200 lb tongue weight capacity therefore so long as the vehicle...
    view full answer...
    Image 1 for
  • Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
    It sounds like you may have an electric Sun bike Jo. If you have an electric bike I recommend to use the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 because of the included ramp and easy folding feature. The rack does weigh 45 lbs but it can be folded in half and is designed with a handle so you can easily carry it to the vehicle. Once you have the bike rack in the hitch you can simply walk the bike up the included ramp onto the rack instead of lifting the bike. The Thule...
    view full answer...
    Image 1 for Image 2 for
  • Is there Any Drilling Required to Install Curt Trailer Hitch # C11202 on a 2009 Nissan cube
    To install the Curt Trailer Hitch Receiver, # C11202, on a 2009 Nissan cube, you will need to enlarge holes that are already there, not drill new holes. I have included a link to the installation instructions that shows where the holes will need to be enlarged. If you plan on doing some towing, the recommended ball mount is # C45520 for use with ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use the Hopkins Plug-In Simple Vehicle Wiring Harness with...
    view full answer...
  • Recommended Bike Rack to Carry a Day 6 Bike on a 2012 Nissan Cube
    Trunk mounted bike racks for your vehicle are not strong enough to carry your Day 6 bikes on the back of your 2012 Nissan Cube, so you will need to use a hitch mounted bike rack for your needs. Nissan does not recommend towing nor installing a hitch on your vehicle, but we do offer trailer hitches to fit your vehicle if you want to use a hitch mounted rack. Many Nissan Cube owners want a trailer hitch to be able to carry bike racks and cargo carriers which is why we offer trailer hitches...
    view full answer...
  • Trailer Hitch and Wiring for a 2011 Nissan Cube
    The Curt trailer hitch # C11202 has a gross trailer weight capacity of 2,000 pounds and 200 pound tongue weight capacity. For a trailer that weighs 400 pounds total the tongue weight would only be 40 to 60 pounds so you are well within the capacities of the hitch. Check the vehicle owner's manual for the vehicle capacity (if listed) and go by whichever is lower; the hitch or the vehicle. You will only need to enlarge holes in the frame to install the hitch, not drill new ones. Since...
    view full answer...
  • Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects
    We do have trailer hitch options for your 2009 Nissa Cube, but the Hidden Hitch Class III Trailer Hitch, # 87538, that you referenced will not fit on your vehicle. This hitch was designed for Nissan pickup trucks. For your vehicle, I recommend looking at the Curt # C11202. According to Curt, this hitch will fit all models of the 2009 Nissan Cube, however they do not mention if any bumper modification is required on the models with ground effects. At this time the only trailer hitches...
    view full answer...
    Image 1 for
  • Curt or Draw Tite Trailer Hitch Recommendation for 2010 Nissan Cube
    The Curt part # C11202 is a confirmed fit for your 2010 Nissan Cube and will fit and install just fine. Curt requires a stabilizer strap like part # 18050 when carrying a non-supported load like a bike rack.
    view full answer...
  • Recommended Trailer Hitch for a 2009 Nissan Cube
    The 2009 and 2010 Nissan Cube models use the same hitches. The Curt hitch # C11202 installs under the exhaust. This Curt Class I Receiver, part # C11202 is a quality hitch, when using the hitch for a bike rack or cargo hitch, you will need a support strap like part # 18050. This stabilizer strap will be needed for any non-trailer load like a bike rack or a cargo carrier. I will include links to the products I have recommended, as well as links to the installation instructions for the hitch.
    view full answer...
  • Is Drilling Required for Installation of the Curt Hitch # C11202 on a 2011 Nissan Cube
    The only drilling need for the receiver hitche # C11202 available for the 2011 Nissan Cube will be enlarging an existing hole in the driver side frame rail. I attached installation instructions for this Curt Hitch, # 11202. To drill this hole for the Curt hitch, you could drill two smaller holes next to the hole that needs to be enlarged in the frame rail to allow access of the hardware for this hitch. Some items you may be interested in to complete your towing setup are the Drawbar,...
    view full answer...
  • Availability of Hitch, Trailer Wiring and Towing Accessories for 2014 Nissan Cube
    Curt Manufacturing does indeed offer a Class I hitch for the 2014 Nissan Cube, which we offer as part # C11202. A hardwired trailer wiring harness is also available as part # C56175. You'll also need the # C45520 ball mount and either the 1-7/8 inch trailer ball, part # C40001 or the 2 inch ball, part # C40018. The trailer you're wanting to tow should have the proper ball size stamped into the metal of the coupler.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.